On 03/13/2014 07:03 PM, David Smith wrote:that would be eli, already asked for in my previous reply.
hey can someone provide these mysterious instructions or at least point
me towards the direction of where this magical list of supported
fence-agents units is so I can try to figure it out myself?
until he replies, you can look at the vdc_options table at these values (they are not available out of the box via the config utility, as they would be overridden at upgrade):
VdsFenceType
upgrade/pre_upgrade/0000_config.sql:select fn_db_update_config_value('VdsFenceType','apc,apc_snmp,bladecenter,cisco_ucs,drac5,drac7,eps,hpblade,ilo,ilo2,ilo3,ilo4,ipmilan,rsa,rsb,wti','3.4');
VdsFenceOptionMapping
upgrade/pre_upgrade/0000_config.sql:select fn_db_update_config_value('VdsFenceOptionMapping','apc:secure=secure,port=ipport,slot=port;apc_snmp:port=port;bladecenter:secure=secure,port=ipport,slot=port;cisco_ucs:secure=ssl,slot=port;drac5:secure=secure,slot=port;drac7:;eps:slot=port;hpblade:port=port;ilo:secure=ssl,port=ipport;ipmilan:;ilo2:secure=ssl,port=ipport;ilo3:;ilo4:;rsa:secure=secure,port=ipport;rsb:;wti:secure=secure,port=ipport,slot=port','3.4');
VdsFenceOptionTypes
upgrade/pre_upgrade/0000_config.sql:select fn_db_add_config_value('VdsFenceOptionTypes','secure=bool,port=int,slot=int','general');
<mailto:iheim@redhat.com>> wrote:
On 03/11/2014 11:43 PM, David Smith wrote:
I modified, tested, and added via git (also submitted note in
rhbz#519731) support for at least basic power on/off of the raritan
devices I have (model DPXS12-20)
Now that I have a working fence agent for myself, is it possible
to tell
me how I can make the config change on my engine to add the
support for
the fence agent I created?
yes, you can change the config of the engine to add it - eli can
give more details (hopefully to be wikified later).
one caveat is i don't think we accommodated yet for customizing it,
so it may be overridden when you upgrade the engine.
(Eli, maybe consider changing to osinfo.d/ like format allowing both
our own config and user configs side by side)
to add this by default to engine, we'd need this to be in a released
version of fence-agents.
Thanks.
On Mon, Feb 17, 2014 at 5:43 AM, Itamar Heim <iheim@redhat.com
<mailto:iheim@redhat.com><mailto:iheim@redhat.com <mailto:iheim@redhat.com>>> wrote:<mailto:didi@redhat.com <mailto:didi@redhat.com>>> <mailto:iheim@redhat.com <mailto:users@ovirt.org <mailto:users@ovirt.org>>
On 02/17/2014 03:31 PM, Marek Grac wrote:
On 02/17/2014 09:45 AM, Eli Mesika wrote:
----- Original Message -----
From: "Yedidyah Bar David" <didi@redhat.com
<mailto:didi@redhat.com><mailto:iheim@redhat.com <mailto:dsmith@mypchelp.com <mailto:users@ovirt.org
Sent: Sunday, February 16, 2014 2:58:35 PM
Subject: Re: [Users] Instructions to add a remote
controlled power
strip not in the native list?
----- Original Message -----
From: "Itamar Heim" <iheim@redhat.com
<mailto:iheim@redhat.com>
<mailto:users@ovirt.org>>
Sent: Saturday, February 15, 2014 2:57:00 AM
Subject: Re: [Users] Instructions to add a
remote
controlled power
strip
not in the native list?
On 02/14/2014 07:37 PM, David Smith wrote:
We use Raritan / Dominion PX remote power
blocks, is there a way to
easily add support for these?
CCing Marek on that in case that he had something
to add
from the
fence-agents view since it may be already supported
implicitly (like
drac7 that is using actually ipmilan)
No, Raritan are not supported yet (rhbz#519731)
so david, if you can try to push the raritan support to
fence-agents, the ovirt side is usually just a config change.