Hi Antoni,

Please find the attached..for the network settings..


On Wed, Jul 30, 2014 at 5:42 PM, Antoni Segura Puimedon <asegurap@redhat.com> wrote:


----- Original Message -----
> From: "Punit Dambiwal" <hypunit@gmail.com>
> To: "Antoni Segura Puimedon" <asegurap@redhat.com>
> Cc: "Sahina Bose" <sabose@redhat.com>, "Dan Kenigsberg" <danken@redhat.com>, barumuga@redhat.com, users@ovirt.org,
> "Itamar Heim" <iheim@redhat.com>, "Michal Skrivanek" <michal.skrivanek@redhat.com>, "Sven Kieske"
> <S.Kieske@mittwald.de>, "Frantisek Kobzik" <fkobzik@redhat.com>, ahadas@redhat.com
> Sent: Wednesday, July 30, 2014 11:35:28 AM
> Subject: Re: Network Question
>
> Hi Antoni,
>
> Please find the attached screen shots...

From what I see in the screen shots,

The ip rules and routes say that communication to the
43.25.76.0/24 should go via bond0.10 which is for the ovirtmgmt device.
That's why it happens.

How did you setup the two networks? Are they on the same subnet?

>
> Thanks,
> Punit
>
>
> On Wed, Jul 30, 2014 at 5:19 PM, Antoni Segura Puimedon <asegurap@redhat.com
> > wrote:
>
> >
> >
> > ----- Original Message -----
> > > From: "Punit Dambiwal" <hypunit@gmail.com>
> > > To: "Sahina Bose" <sabose@redhat.com>
> > > Cc: "Dan Kenigsberg" <danken@redhat.com>, barumuga@redhat.com,
> > users@ovirt.org, "Itamar Heim" <iheim@redhat.com>,
> > > "Michal Skrivanek" <michal.skrivanek@redhat.com>, "Antoni Segura
> > Puimedon" <asegurap@redhat.com>, "Sven Kieske"
> > > <S.Kieske@mittwald.de>, "Frantisek Kobzik" <fkobzik@redhat.com>,
> > ahadas@redhat.com
> > > Sent: Wednesday, July 30, 2014 10:46:47 AM
> > > Subject: Re: Network Question
> > >
> > > Hi All,
> > >
> > > I am using the storage ip to mount the glusterfs to host...that means the
> > > data communication should be run on this network but it's not....it's
> > > running on the ovirtmgmt network...
> >
> > Could you please attach the ip addresses of the gluster nodes, and the
> > result of doing:
> >
> > (on the vdsm host)
> >
> > ip rule show
> > ip route show table (add here each of the tables that show up in the
> > previous
> > command)
> >
> > >
> > > [image: Inline image 1]
> > >
> > >
> > >
> > > On Wed, Jul 30, 2014 at 4:26 PM, Sahina Bose <sabose@redhat.com> wrote:
> > >
> > > >
> > > > On 07/30/2014 01:21 PM, Dan Kenigsberg wrote:
> > > >
> > > >> On Wed, Jul 30, 2014 at 01:04:48PM +0800, Punit Dambiwal wrote:
> > > >>
> > > >>> Hi,
> > > >>>
> > > >>> I am facing one strange problem with Ovirt network...i have the below
> > > >>> network in my ovirt cluster :-
> > > >>>
> > > >>> eth0+eth1=bond0
> > > >>>
> > > >>> bond0.10= ovirtmgmt (43.250.X.X)
> > > >>> bond0.37= VMnetwork
> > > >>>
> > > >>> eth2+eth3=bond1 (Storage) (10.10.10.X)
> > > >>>
> > > >>> Glusterfs running on 4 HV's with each have 2 bricks...
> > > >>>
> > > >>> But still the glusterfs data transfer from ovirtmgmt network instead
> > of
> > > >>> storage network ?? Is there any more setting required to change it to
> > > >>> ovirtmgmt to storage ??
> > > >>>
> > > >> The title "Storage" means nothing to oVirt per se. The user needs to
> > make
> > > >> sure
> > > >> that her NFS or iSCSI storage server uses the specific network.
> > > >> But unfortunately - and Bala is welcome to correct me if I'm wrong -
> > there
> > > >> is no means to set the IP address which gluster uses via oVirt.
> > > >>
> > > >> Can it be done "underneath" oVirt?
> > > >>
> > > >
> > > > For glusterd communication - that is gluster peer to gluster peer -
> > > > there's a workaround to achieve this..Please see
> > http://lists.ovirt.org/
> > > > pipermail/users/2014-February/021213.html
> > > >
> > > > For VM to gluster host, the host IP used to mount the volume is the one
> > > > used for communication by oVirt.
> > > >
> > > >
> > > >
> > > >
> > >
> >
>