Hi Omer,

Thanks for your reply. We will open it as a bug.

--
Regards
Shanil

On Mon, Dec 1, 2014 at 4:38 PM, Omer Frenkel <ofrenkel@redhat.com> wrote:

----- Original Message -----
> From: "Shanil S" <xielesshanil@gmail.com>
> To: "Omer Frenkel" <ofrenkel@redhat.com>, users@ovirt.org, "Juan Hernandez" <jhernand@redhat.com>
> Sent: Monday, December 1, 2014 12:39:12 PM
> Subject: Re: [ovirt-users] Issues with vm start up
>
> Hi Omer,
>
> Thanks for your reply.
>
> We are deploying those VM's through templates and all the templates has
> first boot from hard disk and second with cdrom. We are using cdrom in
> cloud-init section to insert the cloud-init data .Why we need this boot
> loader (VM boot order or in the cloud-init section) as in the template the
> first boot order is harddisk ?
>
>

if the template's boot order has hard-disk it should be ok,
not sure why it seems for this vm the boot order is only cd.
does this happen to any vm created from this template?
can you check the boot order is corrent in the edit vm dialog?

if the boot order is ok in the template,
and it happens to any new vm from this template,
you should open a bug so we could investigate this.

>
> --
> Regards
> Shanil
>
> On Mon, Dec 1, 2014 at 3:37 PM, Omer Frenkel <ofrenkel@redhat.com> wrote:
>
> >
> >
> > ----- Original Message -----
> > > From: "Shanil S" <xielesshanil@gmail.com>
> > > To: "Shahar Havivi" <shaharh@redhat.com>
> > > Cc: users@ovirt.org, "Juan Hernandez" <jhernand@redhat.com>, "Omer
> > Frenkel" <ofrenkel@redhat.com>
> > > Sent: Thursday, November 27, 2014 10:32:54 AM
> > > Subject: Re: [ovirt-users] Issues with vm start up
> > >
> > > Hi Omer,
> > >
> > > I have attached the engine.log and vdsm.log. Please check it. The vm id
> > is
> > > - 7c7aa9dedb57248f5da291117164f0d7
> > >
> >
> > sorry Shanil for the delay,
> > it looks that in the vm settings, you have chosen to boot only from cd ?
> > this is why the vm doest boot, the cloud-init disk is a settings disk, not
> > a boot disk
> > please go to update vm, change the boot order to use hard-disk, and boot
> > the vm.
> >
> > let me know if it helps,
> > Omer.
> >
> > > --
> > > Regards
> > > Shanil
> > >
> > > On Thu, Nov 27, 2014 at 1:46 PM, Shahar Havivi <shaharh@redhat.com>
> > wrote:
> > >
> > > > Try to remove content and run the vm,
> > > > ie remove the runcmd: or some of it - try to use the xml with out CDATA
> > > > maybe
> > > > you can pinpoint the problem that way...
> > > >
> > > >
> > > > On 27.11.14 10:03, Shanil S wrote:
> > > > > Hi All,
> > > > >
> > > > >
> > > > > I am using the ovirt version 3.5 and having some issues with the vm
> > > > startup
> > > > > with cloud-init using api in run-once mode.....
> > > > >
> > > > > Below is the steps i follow :-
> > > > >
> > > > > 1. Create the VM by API from precreated Template..
> > > > > 2. Start the VM in run-once mode and push the cloud-init data from
> > API..
> > > > > 3. VM stuck and from console it display the following :-
> > > > > Booting from DVD/CD.. ...
> > > > > Boot failed : could not read from CDROM (code 004)
> > > > >
> > > > > I am using the following xml for this operation :-
> > > > >
> > > > > <action>
> > > > > <vm>
> > > > > <os>
> > > > > <boot dev='cdrom'/>
> > > > > </os>
> > > > > <initialization>
> > > > > <cloud_init>
> > > > > <host>
> > > > > <address>test</address>
> > > > > </host>
> > > > > <network_configuration>
> > > > > <nics>
> > > > > <nic>
> > > > > <interface>virtIO</interface>
> > > > > <name>eth0</name>
> > > > > <boot_protocol>static</boot_protocol>
> > > > > <mac address=''/>
> > > > > <network>
> > > > > <ip address='' netmask='' gateway=''/>
> > > > > </network>
> > > > > <on_boot>true</on_boot><vnic_profile id='' />
> > > > > </nic>
> > > > > <nic>
> > > > > <interface>virtIO</interface>
> > > > > <name>eth1</name>
> > > > > <boot_protocol>static</boot_protocol>
> > > > > <mac address=''/>
> > > > > <network>
> > > > > <ip address='' netmask='255.255.255.0' gateway=''/>
> > > > > </network>
> > > > > <on_boot>true</on_boot><vnic_profile id='' />
> > > > > </nic>
> > > > > </nics>
> > > > > </network_configuration>
> > > > > <files>
> > > > > <file>
> > > > > <name>/ignored</name><content><![CDATA[#cloud-config
> > > > > disable-ec2-metadata: true
> > > > > disable_root: false
> > > > > ssh_pwauth: true
> > > > > ssh_deletekeys: true
> > > > > chpasswd: { expire: False }
> > > > >
> > > > > users:
> > > > > - name: root
> > > > > primary-group: root
> > > > > passwd: 8W7RQ5Bh
> > > > > lock-passwd: false
> > > > >
> > > > > runcmd:
> > > > > - sed -i '/nameserver/d' /etc/resolv.conf
> > > > > - echo 'nameserver 8.8.8.8' >> /etc/resolv.conf
> > > > > - echo 'nameserver 8.8.4.4' >> /etc/resolv.conf
> > > > > - echo 'root:8W7RQ5Bh' | chpasswd
> > > > > - yum -y update
> > > > > - yum -y install rdate
> > > > > - rdate -s stdtime.gov.hk]]></content>
> > > > > <type>plaintext</type>
> > > > > </file>
> > > > > </files>
> > > > > </cloud_init><custom_script><![CDATA[#cloud-config
> > > > > disable-ec2-metadata: true
> > > > > disable_root: false
> > > > > ssh_pwauth: true
> > > > > ssh_deletekeys: true
> > > > > chpasswd: { expire: False }
> > > > >
> > > > > users:
> > > > > - name: root
> > > > > primary-group: root
> > > > > passwd: 8W7RQ5Bh
> > > > > lock-passwd: false
> > > > >
> > > > > runcmd:
> > > > > - sed -i '/nameserver/d' /etc/resolv.conf
> > > > > - echo 'nameserver 8.8.8.8' >> /etc/resolv.conf
> > > > > - echo 'nameserver 8.8.4.4' >> /etc/resolv.conf
> > > > > - echo 'root:8W7RQ5Bh' | chpasswd
> > > > > - yum -y update
> > > > > - yum -y install rdate
> > > > > - rdate -s stdtime.gov.hk]]></custom_script>
> > > > > </initialization>
> > > > > </vm>
> > > > > </action>
> > > > >
> > > > > I am also attaching the screen shot to this.
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Regards
> > > > > Shanil
> > > >
> > > >
> > > > > _______________________________________________
> > > > > Users mailing list
> > > > > Users@ovirt.org
> > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > >
> > > >
> > >
> >
>