Hi all!

Does anyone use or used Intel Xeon Platinum 8276M with oVirt 4.4.10?

I have the following situation:
I have these 2 sockets on a host, and on bash (lscpu) I identify the 2 sockets, however the oVirt interface only identifies 1 socket:

lscpu:
[root@ovirt03 ~]# lscpu
Architecture:        x86_64
CPU op-mode(s):      32-bit, 64-bit
Byte Order:          Little Endian
CPU(s):              112
On-line CPU(s) list: 0-111
Thread(s) per core:  2
Core(s) per socket:  28
Socket(s):           2
NUMA node(s):        2
Vendor ID:           GenuineIntel
BIOS Vendor ID:      Intel(R) Corporation
CPU family:          6
Model:               85
Model name:          Intel(R) Xeon(R) Platinum 8276M CPU @ 2.20GHz
BIOS Model name:     Intel(R) Xeon(R) Platinum 8276M CPU @ 2.20GHz
Stepping:            7
CPU MHz:             2990.453
CPU max MHz:         4000.0000
CPU min MHz:         1000.0000
BogoMIPS:            4400.00
Virtualization:      VT-x
L1d cache:           32K
L1i cache:           32K
L2 cache:            1024K
L3 cache:            39424K
NUMA node0 CPU(s):   0-27,56-83
NUMA node1 CPU(s):   28-55,84-111
Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 cdp_l3 invpcid_single intel_ppin ssbd mba ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid cqm mpx rdt_a avx512f avx512dq rdseed adx smap clflushopt clwb intel_pt avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida arat pln pts pku ospke avx512_vnni md_clear flush_l1d arch_capabilities
[root@ovirt03 ~]#

oVirt Host Interface:
CPU Model Name: Intel(R) Xeon(R) Platinum 8276M CPU @ 2.20GHz
CPU Type: Secure Intel Cascadelake Server Family
CPU Sockets: 1
CPU Cores per Socket: 56
CPU Threads per Core: 2 (SMT Enabled)
TSC Frequency: 2199999000 (scaling enabled)

I need it to show the 2 sockets because I need to configure the NUMA.

If anyone has any tips or fixes, I'd appreciate it.
--

Att,
Jorge Visentini
+55 55 98432-9868