Hello,

I was fortuned to get my hands on a second server with more storage.

Now I have a HP Proliant 380 G5 with 2 4-cores and 32 Gb of memory and close to 1,2 Tb of space. Unfortunatly it is equiped with a smart array 400 so I configured it as a RAID 10. (8 300Gb disks) and 6 Gigabyte nic's

I would like to set this server up as a ovirt-engine and the NFS server

The second server is a DELL PowerEdge R420 with 2 6-cores and 64 Gb RAM and 2 Gigayte nic's

My question is how to set up the ovirt engine (partitioning, network setup) and I will use the ovirt-node image you just to install on the DELL server.

Kind regards.

2014-02-21 15:18 GMT+01:00 Andy Michielsen <andy.michielsen@gmail.com>:

Hello,

Maybe I'm not asking my question at the right guy's but here I go.

I installed a clean CentOS 6.5 on a new DELL server and wanted to use it to install oVirt 3.3.x.x

I changed the ifcfg-eth0 file to get it connected to the internet and did a yum -y update.

Then I added some repositories to get the oVirt packages :
- yum -y install http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm

- yum -y install http://resources.ovirt.org/releases/ovirt-release-el.noarch.rpm

Installed the ovirt engine first with yum -y install ovirt-engine and than run the setup by engine-setup.

So far so good.

I can log into the oVirt website and see that there is nothing there.

Then I want to install yum -y install vdsm vdsm-cli and wanted to add the ifcfg-ovirtmgmt bridge and that's where thing go wrong.

Obviously I did something wrong but I don't know what. Any help would be greatly appriciated.

Kind regards.