Dominic

On Tue, Jan 17, 2012 at 10:51 PM, Mike Burns <mburns@redhat.com> wrote:

On Tue, 2012-01-17 at 12:51 -0500, Mike Burns wrote:
> On Tue, 2012-01-17 at 12:39 -0500, Dominic Kaiser wrote:
> > Thanks all,
> >
> >
> > I have tried the new ovirt node 2.2.1-3 nightly build today and it
> > finally recognized my realtek nic card. So I have moved to try to get
> > node to install. Still a fail I might add. It adds to the ovirt gui
> > but fails install and says the ovirt hyperviser is not a supported
> > platform. That is kind of funny since it is fedora 16. And yes I had
> > edited the vdsm.conf by hand was that wrong to do? Should I have used
> > vi instead? I would like to get ovirt node running since it is
> > working now lighter install. This is what I get:
> >
> >
> > 2012-Jan-17, 12:28:59
> > Failed to install Host
> > vm3.bostonvineyard.org.
> > Step: INSTALLER;
> > Details: Unsupported
> > platform:
> > oVirtNodeHypervisor.
> >
> >
> >
> > If it registers from ovirt node should it not show up in the ovirt
> > Management gui? Or do you still have to add it as usual? So that is
> > what I did and that is the error I recieved.
>
> oVirt Node supports 2 ways of registering.
>
> 1. Set the hostname and port of the management server
> The Node registers itself to the engine and the admin then only has to
> approve it.

This appears to not be working at the moment. There are 404 errors in
the log. I'll file a bug for the vdsm team to look into this.

>
> 2. Set a password and use add host from the engine
> The node does no registration. The admin for engine manually adds the
> node as they would a regular Fedora node.

This is not working out of the box. I get the same error you do about
it being an unsupported platform. I filed a bug [1] for this issue with
a patch as well[2]. This patch can be applied directly on the engine
system to get around the problem. oVirtNodeHypervisor is simply missing
from the list of supported systems.

[1] https://bugzilla.redhat.com/show_bug.cgi?id=782660
[2] http://gerrit.ovirt.org/#change,1117

Mike

>
>
> As for the actual error, I've seen other problems with that build of
> ovirt-node that I'm working on so I haven't tried to register it yet.
> I'll try it though.
>
> Mike
>
> >
> >
> > Let me know what you think,
> >
> >
> > Dominic
> >
> > On Tue, Jan 17, 2012 at 11:46 AM, Doron Fediuck <dfediuck@redhat.com>
> > wrote:
> > On Tuesday 17 January 2012 11:31:43 Dominic Kaiser wrote:
> > > Ok here are the log files. It installs most packages and
> > then hangs up on
> > > libjpeg? libjpeg is installed including dev package. This
> > is a bare-metal
> > > node running fedora 16 with vdsm packages installed from
> > repo. Your node
> > > .iso 2.2.1 does not initialize realtek nic cards so I can
> > not use that.
> > > The 2.2.1 .iso sees the nic card but that is it. So I went
> > the route of
> > > installing the full fedora 16 distro and installing vdsm
> > packages from
> > > repo. I am bridged correctly and ssl=false in the
> > vdsm.conf. Now when I
> > > go to the ovirt management gui and install the node it fails
> > at this step.
> > > I can see the node in ovirt management gui just an fyi so
> > not a problem
> > > with detection. It seems that the vdsm server will not
> > start due to
> > > libjpeg install failure but mabey I am wrong.
> > >
> > > Let me know what you think,
> > >
> > > Dominic
> > >
> >
> > Hi Dominic,
> > This is where your installation fails:
> > ParsingError: File contains parsing
> > errors: /etc/vdsm/vdsm.conf
> > [line 42]: ' default_bridge = engine\n'
> > [line 93]: ' ssl = false\n'
> > [line 191]: ' management_port = 54321\n'
> > [line 193]: ' management_ip = 10.3.0.245\n'
> > Sun, 15 Jan 2012 08:01:27 DEBUG <BSTRAP
> > component='CreateConf' status='FAIL' message='Basic
> > configuration failed'/>
> >
> > Now I'm wondering how did you edit /etc/vdsm/vdsm.conf?
> > Did you really add a string '\n' or is it just the way the
> > error propmts?
> >
> > --
> >
> > /d
> >
> > "Air conditioned environment - Do NOT open Windows!"
> >
> >
> >
> >
> >
> > --
> > Dominic Kaiser
> > Greater Boston Vineyard
> > Director of Operations
> >
> > cell: 617-230-1412
> > fax: 617-252-0238
> > email: dominic@bostonvineyard.org
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
>
> _______________________________________________
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

--
Dominic Kaiser
Greater Boston Vineyard
Director of Operations

cell: 617-230-1412
fax: 617-252-0238
email: dominic@bostonvineyard.org