Hi,

I am sorry to bother you again. 

I am trying to deploy an oVirt engine for oVirtNode-4.2.5.1. I get the same error I encountered before:

[ INFO  ] TASK [Add glusterfs storage domain]
[ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[Problem while trying to mount target]". HTTP response code is 400.
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Problem while trying to mount target]\". HTTP response code is 400."}
          Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs)[nfs]:

The glusterd daemon is running. 

During the deployment of the engine it sets the engine entry in the /etc/hosts file with the IP Address of 192.168.124.* which it gets form the virbr0 bridge interface. I stopped the bridge and deleted it, but still giving the same error. Not sure what causes it to use that interface. Please help!

But I give the engine an IP of 192.168.1.10 same subnet as my gateway and my ovirtmgmt bridge. Attached is the ifconfig output of my Node, engine.log and vdsm.log.

Your assistance is always appreciated





On Wed, Jul 11, 2018 at 11:47 AM, Sahina Bose <sabose@redhat.com> wrote:
Is glusterd running on the server: goku.sanren.**
There's an error
Failed to get volume info: Command execution failed
error: Connection failed. Please check if gluster daemon is operational

Please check the volume status using "gluster volume status engine"

and if all looks ok, attach the mount logs from /var/log/glusterfs

On Wed, Jul 11, 2018 at 1:57 PM, Sakhi Hadebe <sakhi@sanren.ac.za> wrote:
Hi,

I have managed to fix the error by enabling the DMA Virtualisation in BIOS. I am now hit with a new error: It's failing to add a glusterfs storage domain:

[ INFO  ] TASK [Add glusterfs storage domain]
[ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[Problem while trying to mount target]". HTTP response code is 400.
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Problem while trying to mount target]\". HTTP response code is 400."}
          Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs)[nfs]:

Attached are vdsm and engine log files.





On Wed, Jul 11, 2018 at 9:57 AM, Sakhi Hadebe <sakhi@sanren.ac.za> wrote:


On Wed, Jul 11, 2018 at 9:33 AM, Sakhi Hadebe <sakhi@sanren.ac.za> wrote:
Hi,

Below are the versions of packages installed. Please find the logs attached.
Qemu:
ipxe-roms-qemu-20170123-1.git4e85b27.el7_4.1.noarch
libvirt-daemon-driver-qemu-3.9.0-14.el7_5.6.x86_64
qemu-img-ev-2.10.0-21.el7_5.4.1.x86_64
qemu-kvm-ev-2.10.0-21.el7_5.4.1.x86_64
qemu-kvm-common-ev-2.10.0-21.el7_5.4.1.x86_64

Libvirt installed packages:
libvirt-daemon-driver-storage-disk-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-config-nwfilter-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-storage-iscsi-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-network-3.9.0-14.el7_5.6.x86_64
libvirt-libs-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-secret-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-storage-core-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-storage-gluster-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-storage-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-qemu-3.9.0-14.el7_5.6.x86_64
libvirt-3.9.0-14.el7_5.6.x86_64
libvirt-python-3.9.0-1.el7.x86_64
libvirt-daemon-driver-nodedev-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-storage-rbd-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-storage-scsi-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-config-network-3.9.0-14.el7_5.6.x86_64
libvirt-client-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-kvm-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-storage-logical-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-interface-3.9.0-14.el7_5.6.x86_64
libvirt-lock-sanlock-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-storage-mpath-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-lxc-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-nwfilter-3.9.0-14.el7_5.6.x86_64

Virt-manager:
virt-manager-common-1.4.3-3.el7.noarch

oVirt:
[root@localhost network-scripts]# rpm -qa | grep ovirt
ovirt-setup-lib-1.1.4-1.el7.centos.noarch
cockpit-ovirt-dashboard-0.11.28-1.el7.noarch
ovirt-imageio-common-1.3.1.2-0.el7.centos.noarch
ovirt-vmconsole-host-1.0.5-4.el7.centos.noarch
ovirt-host-dependencies-4.2.3-1.el7.x86_64
ovirt-engine-sdk-python-3.6.9.1-1.el7.noarch
ovirt-imageio-daemon-1.3.1.2-0.el7.centos.noarch
ovirt-host-4.2.3-1.el7.x86_64
python-ovirt-engine-sdk4-4.2.7-2.el7.x86_64
ovirt-host-deploy-1.7.4-1.el7.noarch
cockpit-machines-ovirt-169-1.el7.noarch
ovirt-hosted-engine-ha-2.2.14-1.el7.noarch
ovirt-vmconsole-1.0.5-4.el7.centos.noarch
ovirt-provider-ovn-driver-1.2.11-1.el7.noarch
ovirt-engine-appliance-4.2-20180626.1.el7.noarch
ovirt-hosted-engine-setup-2.2.22.1-1.el7.noarch






On Wed, Jul 11, 2018 at 6:48 AM, Yedidyah Bar David <didi@redhat.com> wrote:
On Tue, Jul 10, 2018 at 11:32 PM, Sakhi Hadebe <sakhi@sanren.ac.za> wrote:
Hi,

I did not select any CPU architecture. It doenst gove me the option to select one. It only states the number of virtual CPUs and the memory for the engine VM.

Looking at the documentation of installing ovirt-release36.rpm....it does allow you to select te CPU, but not when installing ovirt-release42.rpm

On Tuesday, July 10, 2018, Alastair Neil <ajneil.tech@gmail.com> wrote:
what did you select as your CPU architecture when you created the cluster?  It looks like the VM is trying to use a CPU type of "Custom", how many nodes in your cluster?  I suggest you specify the lowest common denominator of CPU architecture (e.g. Sandybridge) of the nodes as the CPU architecture of the cluster..

On Tue, 10 Jul 2018 at 12:01, Sakhi Hadebe <sakhi@sanren.ac.za> wrote:
Hi,

I have just re-installed centOS 7 in 3 servers and have configured gluster volumes following this documentation: https://www.ovirt.org/blog/2016/03/up-and-running-with-ovirt-3-6/, But I have installed 
http://resources.ovirt.org/pub/yum-repo/ovirt-release42.rpm
​package.
Hosted-engine --deploy is failing with this error:

 "rhel7", "--virt-type", "kvm", "--memory", "16384", "--vcpus", "4", "--network", "network=default,mac=00:16:3e:09:5e:5d,model=virtio", "--disk", "/var/tmp/localvm0nnJH9/images/eacac30d-0304-4c77-8753-6965e4b8c2e7/d494577e-027a-4209-895b-6132e6fc6b9a", "--import", "--disk", "path=/var/tmp/localvm0nnJH9/seed.iso,device=cdrom", "--noautoconsole", "--rng", "/dev/random", "--graphics", "vnc", "--video", "vga", "--sound", "none", "--controller", "usb,model=none", "--memballoon", "none", "--boot", "hd,menu=off", "--clock", "kvmclock_present=yes"], "delta": "0:00:00.979003", "end": "2018-07-10 17:55:11.308555", "msg": "non-zero return code", "rc": 1, "start": "2018-07-10 17:55:10.329552", "stderr": "ERROR    unsupported configuration: CPU mode 'custom' for x86_64 kvm domain on x86_64 host is not supported by hypervisor\nDomain installation does not appear to have been successful.\nIf it was, you can restart your domain by running:\n  virsh --connect qemu:///system start HostedEngineLocal\notherwise, please restart your installation.", "stderr_lines": ["ERROR    unsupported configuration: CPU mode 'custom' for x86_64 kvm domain on x86_64 host is not supported by hypervisor", "Domain installation does not appear to have been successful.", "If it was, you can restart your domain by running:", "  virsh --connect qemu:///system start HostedEngineLocal", "otherwise, please restart your installation."], "stdout": "\nStarting install...", "stdout_lines": ["", "Starting install..."]}

This seems to be in the phase where we create a local vm for the engine. We do this with plain virt-install, nothing fancy. Searching the net for "unsupported configuration: CPU mode 'custom'" finds other relevant reports, you might want to check them. You can see the command in bootstrap_local_vm.yml .

Please check/share versions of relevant packages (libvirt*, qemu*, etc) and relevant logs (libvirt).

Also updating the subject line and adding Simone.

Best regards,
--
Didi



--
Regards,
Sakhi Hadebe
Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR
 
Tel:   +27 12 841 2308
Fax:   +27 12 841 4223
Cell:  +27 71 331 9622
Email: sakhi@sanren.ac.za



--
Regards,
Sakhi Hadebe
Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR
 
Tel:   +27 12 841 2308
Fax:   +27 12 841 4223
Cell:  +27 71 331 9622
Email: sakhi@sanren.ac.za



--
Regards,
Sakhi Hadebe
Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR
 
Tel:   +27 12 841 2308
Fax:   +27 12 841 4223
Cell:  +27 71 331 9622
Email: sakhi@sanren.ac.za

_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-leave@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YHKUKW22QLRVS56XZBXEWOGORFWFEGIA/





--
Regards,
Sakhi Hadebe
Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR
 
Tel:   +27 12 841 2308
Fax:   +27 12 841 4223
Cell:  +27 71 331 9622
Email: sakhi@sanren.ac.za