Il 02/07/2015 12:56, Sandro Bonazzola ha scritto:
> Il 02/07/2015 12:44, Zhong Qiang ha scritto:
>> Hey Sandro,
>> Thanks for your reply.
>>
>> [root@ovirthost01 ~]# locale
>> LANG=en_US.utf8
>> LC_CTYPE="en_US.utf8"
>> LC_NUMERIC="en_US.utf8"
>> LC_TIME="en_US.utf8"
>> LC_COLLATE="en_US.utf8"
>> LC_MONETARY="en_US.utf8"
>> LC_MESSAGES="en_US.utf8"
>> LC_PAPER="en_US.utf8"
>> LC_NAME="en_US.utf8"
>> LC_ADDRESS="en_US.utf8"
>> LC_TELEPHONE="en_US.utf8"
>> LC_MEASUREMENT="en_US.utf8"
>> LC_IDENTIFICATION="en_US.utf8"
>> LC_ALL=
>>
>
> tried to reproduce your issue on a clean non-node system and it works fine.
Issue has been found, patch pushed: https://gerrit.ovirt.org/43147
>
> Fabian, are you able to reproduce on node?
>
>>
>> 2015-07-02 17:17 GMT+08:00 Sandro Bonazzola <sbonazzo@redhat.com <mailto:sbonazzo@redhat.com>>:
>>
>> Il 02/07/2015 10:59, Zhong Qiang ha scritto:
>> > hey Sandro,
>> > this is my log:
>> >
>> > 2015-07-02 15:51 GMT+08:00 Sandro Bonazzola <sbonazzo@redhat.com <mailto:sbonazzo@redhat.com> <mailto:sbonazzo@redhat.com
>> <mailto:sbonazzo@redhat.com>>>:
>> >
>> > Il 02/07/2015 05:45, Zhong Qiang ha scritto:
>> > > hey,
>> > > I tried two case.
>> > > ##################
>> > > case 1:
>> > > installed ovirt-node-iso-3.5-0.999.201506302311.el7.centos.iso or ovirt-node-iso-3.5-0.999.201507012312.el7.centos.iso ,
>> and setup
>> > > hosted-engine .
>> > > got error message below:
>> > > @@@@@@@@@@@@@@@@@@@@@@@@@@@
>> > > [root@ovirthost01 Stor01]# hosted-engine --deploy
>> > > [ INFO ] Stage: Initializing
>> > > [ INFO ] Generating a temporary VNC password.
>> > > [ INFO ] Stage: Environment setup
>> > > Continuing will configure this host for serving as hypervisor and create a VM where you have to install oVirt Engine afterwards.
>> > > Are you sure you want to continue? (Yes, No)[Yes]:
>> > > Configuration files: []
>> > > Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20150702021002-pa9xwr.log
>> > > Version: otopi-1.3.3_master (otopi-1.3.3-0.0.master.20150617163218.gitfc9ccb8.el7)
>> > > [ INFO ] Hardware supports virtualization
>> > > [ INFO ] Stage: Environment packages setup
>> > > [ INFO ] Stage: Programs detection
>> > > [ INFO ] Stage: Environment setup
>> > > [ INFO ] Stage: Environment customization
>> > >
>> > > --== STORAGE CONFIGURATION ==--
>> > >
>> > > During customization use CTRL-D to abort.
>> > > Please specify the storage you would like to use (iscsi, nfs3, nfs4)[nfs3]:
>> > > Please specify the full shared storage connection path to use (example: host:/path): 10.10.19.99:/volume1/nfsstor
>> > > The specified storage location already contains a data domain. Is this an additional host setup (Yes, No)[Yes]?
>> > > [ INFO ] Installing on additional host
>> > > Please specify the Host ID [Must be integer, default: 2]:
>> > > Please provide storage domain name. [hosted_storage]: hostedStor
>> > > [ ERROR ] Failed to execute stage 'Environment customization': Storage domain name cannot be empty. It can only consist of alphanumeric
>> characters
>> > > (that is, letters, numbers, and signs "-" and "_"). All other characters are not valid in the name.
>> >
>> > Can you please provide /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20150702021002-pa9xwr.log?
>>
>> This is weird.
>> the storage domain recorded is:
>> OVEHOSTED_STORAGE/storageDomainName=str:'hostedStor'
>>
>> and the validation should fail only if it matches _RE_NOT_ALPHANUMERIC = re.compile(r"[^-\w]")
>>
>> so 'hostedStor' should have been considered valid.
>> can you please provide 'locale' output?
>> maybe it's a locale issue.
>>
>>
>> >
>> >
>> >
>> > > [ INFO ] Stage: Clean up
>> > > [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20150702021034.conf'
>> > > [ INFO ] Stage: Pre-termination
>> > > [ INFO ] Stage: Termination
>> > > @@@@@@@@@@@@@@@@@@@@@@@@@@@@
>> > >
>> > > #########################
>> > > case 2:
>> > > installed ovirt-node-iso-3.5-0.999.201504280931.el7.centos.iso , and setup hosted-engine .
>> > > got error message below:
>> > > @@@@@@@@@@@@@@@@@@@@@@@@@@@@
>> > > [root@ovirthost01 ~]# hosted-engine --deploy
>> > > [ INFO ] Stage: Initializing
>> > > [ INFO ] Generating a temporary VNC password.
>> > > [ INFO ] Stage: Environment setup
>> > > Continuing will configure this host for serving as hypervisor and create a VM where you have to install oVirt Engine afterwards.
>> > > Are you sure you want to continue? (Yes, No)[Yes]:
>> > > Configuration files: []
>> > > Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20150702022914-83zr2r.log
>> > > Version: otopi-1.3.1 (otopi-1.3.1-1.el7)
>> > > [ INFO ] Hardware supports virtualization
>> > > [ INFO ] Stage: Environment packages setup
>> > > [ INFO ] Stage: Programs detection
>> > > [ INFO ] Stage: Environment setup
>> > > [ INFO ] Stage: Environment customization
>> > >
>> > > --== STORAGE CONFIGURATION ==--
>> > >
>> > > During customization use CTRL-D to abort.
>> > > Please specify the storage you would like to use (iscsi, nfs3, nfs4)[nfs3]:
>> > > Please specify the full shared storage connection path to use (example: host:/path): 10.10.19.99:/volume1/nfsstor
>> > > The specified storage location already contains a data domain. Is this an additional host setup (Yes, No)[Yes]? No
>> > > [ INFO ] Installing on first host
>> > > Local storage datacenter name is an internal name and currently will not be shown in engine's admin UI.
>> > > Please enter local datacenter name [hosted_datacenter]:
>> > >
>> > > --== SYSTEM CONFIGURATION ==--
>> > >
>> > >
>> > > --== NETWORK CONFIGURATION ==--
>> > >
>> > > Please indicate a nic to set ovirtmgmt bridge on: (p4p1) [p4p1]:
>> > > iptables was detected on your computer, do you wish setup to configure it? (Yes, No)[Yes]:
>> > > Please indicate a pingable gateway IP address [10.10.19.254]:
>> > >
>> > > --== VM CONFIGURATION ==--
>> > >
>> > > Please specify the device to boot the VM from (cdrom, disk, pxe) [cdrom]: disk
>> > > Please specify path to OVF archive you would like to use [None]: /data/Stor01/oVirt-Engine-Appliance-CentOS-x86_64-7-20150628.74.ova
>> > > [ INFO ] Checking OVF archive content (could take a few minutes depending on archive size)
>> > > [ INFO ] Checking OVF XML content (could take a few minutes depending on archive size)
>> > > [WARNING] OVF does not contain a valid image description, using default.
>> > > [ ERROR ] Not enough space in the temporary directory
>> > > Please specify path to a temporary directory with at least 10 GB [/tmp]: /data/Stor01/tmp
>> > > Please specify an alias for the Hosted Engine image [hosted_engine]:
>> > > The following CPU types are supported by this host:
>> > > - model_Nehalem: Intel Nehalem Family
>> > > - model_Penryn: Intel Penryn Family
>> > > - model_Conroe: Intel Conroe Family
>> > > Please specify the CPU type to be used by the VM [model_Nehalem]:
>> > > [WARNING] Minimum requirements for disk size not met
>> > > You may specify a unicast MAC address for the VM or accept a randomly generated default [00:16:3e:4c:58:c1]:
>> > > Please specify the console type you would like to use to connect to the VM (vnc, spice) [vnc]:
>> > >
>> > > --== HOSTED ENGINE CONFIGURATION ==--
>> > >
>> > > Enter the name which will be used to identify this host inside the Administrator Portal [hosted_engine_1]:
>> > > Enter 'admin@internal' user password that will be used for accessing the Administrator Portal:
>> > > Confirm 'admin@internal' user password:
>> > > Please provide the FQDN for the engine you would like to use.
>> > > This needs to match the FQDN that you will use for the engine installation within the VM.
>> > > Note: This will be the FQDN of the VM you are now going to create,
>> > > it should not point to the base host or to any other existing machine.
>> > > Engine FQDN: ovirtmgmt.ctcnet.com <http://ovirtmgmt.ctcnet.com> <http://ovirtmgmt.ctcnet.com> <http://ovirtmgmt.ctcnet.com>
>> > > Please provide the name of the SMTP server through which we will send notifications [localhost]:
>> > > Please provide the TCP port number of the SMTP server [25]:
>> > > Please provide the email address from which notifications will be sent [root@localhost]:
>> > > Please provide a comma-separated list of email addresses which will get notifications [root@localhost]:
>> > > [ INFO ] Stage: Setup validation
>> > > [WARNING] Cannot validate host name settings, reason: resolved host does not match any of the local addresses
>> > > [WARNING] Failed to resolve ovirthost01.ctcnet.com <http://ovirthost01.ctcnet.com> <http://ovirthost01.ctcnet.com>
>> <http://ovirthost01.ctcnet.com> using DNS, it can be resolved
>> > only locally
>> > >
>> > > --== CONFIGURATION PREVIEW ==--
>> > >
>> > > Bridge interface : p4p1
>> > > Engine FQDN : ovirtmgmt.ctcnet.com <http://ovirtmgmt.ctcnet.com> <http://ovirtmgmt.ctcnet.com>
>> <http://ovirtmgmt.ctcnet.com>
>> > > Bridge name : ovirtmgmt
>> > > SSH daemon port : 22
>> > > Firewall manager : iptables
>> > > Gateway address : 10.10.19.254
>> > > Host name for web application : hosted_engine_1
>> > > Host ID : 1
>> > > Image alias : hosted_engine
>> > > Image size GB : 10
>> > > Storage connection : 10.10.19.99:/volume1/nfsstor
>> > > Console type : vnc
>> > > Memory size MB : 16384
>> > > MAC address : 00:16:3e:4c:58:c1
>> > > Boot type : disk
>> > > Number of CPUs : 4
>> > > OVF archive (for disk boot) : /data/Stor01/oVirt-Engine-Appliance-CentOS-x86_64-7-20150628.74.ova
>> > > CPU Type : model_Nehalem
>> > >
>> > > Please confirm installation settings (Yes, No)[Yes]:
>> > > [ INFO ] Stage: Transaction setup
>> > > [ INFO ] Stage: Misc configuration
>> > > [ INFO ] Stage: Package installation
>> > > [ INFO ] Stage: Misc configuration
>> > > [ INFO ] Configuring libvirt
>> > > [ INFO ] Configuring VDSM
>> > > [ INFO ] Starting vdsmd
>> > > [ INFO ] Waiting for VDSM hardware info
>> > > [ INFO ] Configuring the management bridge
>> > > [ INFO ] Connected to Storage Domain
>> > > [ INFO ] Connecting Storage Pool
>> > > [ INFO ] Verifying sanlock lockspace initialization
>> > > [ INFO ] Creating VM Image
>> > > [ INFO ] Extracting disk image from OVF archive (could take a few minutes depending on archive size)
>> > > [ INFO ] Validating pre-allocated volume size
>> > > [ INFO ] Image not uploaded to data domain
>> > > [ ERROR ] Failed to execute stage 'Misc configuration': Incoherence detected in OVF file: image size 10485760000 does not match declared size
>> > 10737418240
>> >
>> > Fabian looks like OVF xml is not matching OVA content, can you take a look?
>> >
>> > I checked this OVF xml,size is 10485760000 ,and modified the size to 10737418240, and recompress files to xxx.ova.but
>> > still got this error!
>> >
>> > > [ INFO ] Stage: Clean up
>> > > [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20150702023715.conf'
>> > > [ INFO ] Stage: Pre-termination
>> > > [ INFO ] Stage: Termination
>> > >
>> > > @@@@@@@@@@@@@@@@@@@@@@@@@@@@
>> > >
>> > > 2015-07-01 18:42 GMT+08:00 Fabian Deutsch <fdeutsch@redhat.com <mailto:fdeutsch@redhat.com> <mailto:fdeutsch@redhat.com
>> <mailto:fdeutsch@redhat.com>> <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com>
>> > <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com>>>>:
>> > >
>> > > ----- Original Message -----
>> > > > Hey,
>> > > > I can't update ovirt node,get this message:
>> > >
>> > > From what to what Node version did you want to upgrade?
>> > >
>> > > Upgrades from el6 to el7 are not supported.
>> > >
>> > > - fabian
>> > >
>> > > > [root@ovirthost1 Stor01]# ovirt-node-upgrade
>> > > > --iso=/data/Stor01/ISOs/ovirt-node-iso-3.5-0.999.201506302311.el7.centos.iso
>> > > > --reboot=1
>> > > > ovirt-node-upgrade.UpgradeTool: INFO Temporary Directory is:
>> > > > /data/tmpfZC2lU
>> > > > ovirt-node-upgrade.LockFile: INFO Acquiring Lock
>> > > > ovirt-node-upgrade.UpgradeTool: ERROR Error: Upgrade Failed: Command
>> > > > Failed: '('mount', '-o', 'loop', '/live/LiveOS/squashfs.img',
>> > > > '/data/tmpfZC2lU/squashfs')' []
>> > > > Traceback (most recent call last):
>> > > > File "/usr/sbin/ovirt-node-upgrade", line 362, in run
>> > > > self._extract_rootfs(self._options.iso_file)
>> > > > File "/usr/sbin/ovirt-node-upgrade", line 206, in _extract_rootfs
>> > > > squashfs_dir)
>> > > > File "/usr/sbin/ovirt-node-upgrade", line 145, in _system
>> > > > raise RuntimeError("Command Failed: '%s' %s" % (command, output))
>> > > > RuntimeError: Command Failed: '('mount', '-o', 'loop',
>> > > > '/live/LiveOS/squashfs.img', '/data/tmpfZC2lU/squashfs')' []
>> > > > ovirt-node-upgrade.UpgradeTool: INFO Running rollback hooks
>> > > > ovirt-node-upgrade.UpgradeTool: INFO rollback hooks completed
>> > > > ovirt-node-upgrade.UpgradeTool: INFO Warning:
>> > > > /data/tmpfZC2lU/rootfs/usr/libexec/ovirt-node/hooks/rollback does not exist
>> > > > ovirt-node-upgrade.UpgradeTool: INFO Upgrade Failed, Rollback Completed
>> > > > ovirt-node-upgrade.UpgradeTool: INFO Cleaning up temporary directory
>> > > > ovirt-node-upgrade.UpgradeTool: WARNING Cleanup Failed
>> > > >
>> > > >
>> > > > thanks
>> > > >
>> > > > --qiang
>> > > >
>> > > > 2015-07-01 15:20 GMT+08:00 Fabian Deutsch <fdeutsch@redhat.com <mailto:fdeutsch@redhat.com> <mailto:fdeutsch@redhat.com
>> <mailto:fdeutsch@redhat.com>> <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com>
>> > <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com>>>>:
>> > > >
>> > > > >
>> > > > >
>> > > > > ----- Original Message -----
>> > > > > > hi fabian:
>> > > > > > I got some error message below.How can i fix this?
>> > > > > >
>> > > > >
>> > > > > Hey
>> > > > >
>> > > > > > [ ERROR ] Not enough space in the temporary directory
>> > > > > > Please specify path to a temporary directory with at least 10
>> > > > > GB
>> > > > >
>> > > > > You need more space on /tmp - At best you should have 50GB available on /
>> > > > >
>> > > > > > [WARNING] Minimum requirements for disk size not met
>> > > > >
>> > > > > The same as above
>> > > > >
>> > > > > > Engine FQDN: ovirtmgmt.ctcnet.com <http://ovirtmgmt.ctcnet.com> <http://ovirtmgmt.ctcnet.com>
>> <http://ovirtmgmt.ctcnet.com>
>> > > > > > [WARNING] Failed to resolve ovirtmgmt.ctcnet.com <http://ovirtmgmt.ctcnet.com> <http://ovirtmgmt.ctcnet.com>
>> <http://ovirtmgmt.ctcnet.com> using DNS, it can be
>> > > > > > resolved only locally
>> > > > >
>> > > > > The FQDN you use should be resolvable in your network, and it seems as if
>> > > > > this
>> > > > > is not the case.
>> > > > >
>> > > > > > [ INFO ] Stage: Setup validation
>> > > > > > [WARNING] Cannot validate host name settings, reason: resolved host does
>> > > > > > not match any of the local addresses
>> > > > > > [WARNING] Failed to resolve ovirthost1.ctcnet.com <http://ovirthost1.ctcnet.com> <http://ovirthost1.ctcnet.com>
>> <http://ovirthost1.ctcnet.com> using DNS, it can be
>> > > > > > resolved only locally
>> > > > >
>> > > > > Same as the previous one.
>> > > > >
>> > > > > > [ ERROR ] Failed to execute stage 'Misc configuration': Incoherence
>> > > > > > detected in OVF file: image size 10485760000 does not match declared size
>> > > > > > 10737418240
>> > > > >
>> > > > > Mh. This is a quite old bug.
>> > > > > Could yo uretry with a more recent iso from:
>> > > > > http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.5_create-iso-el7_merged/
>> > > > >
>> > > > >
>> > > > > Greetings
>> > > > > fabian
>> > > > >
>> > > >
>> > > > _______________________________________________
>> > > > Users mailing list
>> > > > Users@ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> <mailto:Users@ovirt.org
>> <mailto:Users@ovirt.org> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>
>> > > > http://lists.ovirt.org/mailman/listinfo/users
>> > > >
>> > >
>> > >
>> > >
>> > >
>> > > _______________________________________________
>> > > Users mailing list
>> > > Users@ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
>> > > http://lists.ovirt.org/mailman/listinfo/users
>> > >
>> >
>> >
>> > --
>> > Sandro Bonazzola
>> > Better technology. Faster innovation. Powered by community collaboration.
>> > See how it works at redhat.com <http://redhat.com> <http://redhat.com>
>> >
>> >
>>
>>
>> --
>> Sandro Bonazzola
>> Better technology. Faster innovation. Powered by community collaboration.
>> See how it works at redhat.com <http://redhat.com>
>>
>>
>
>
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com