Hello Darrell,

I can report back that after making all of the config changes you noted, deployment completed and hosted engine is up and running! Hyperconverged Ovirt 4.2 on ZFS! Thank you sir!

On Thu, Nov 15, 2018 at 6:09 PM Darrell Budic <budic@onholyground.com> wrote:
I did this in the past and didn’t have any trouble with gluster/ZFS, but 4.2.x probably does more validation.

I recommend these settings on your zfs volumes, I set mine at the root(v0 here) and let them inherit:

required:
v0    xattr                 sa                     local
v0    acltype               posixacl               local
optional but I recommend them:
v0    relatime              on                     local
v0    compression           lz4                    local

For gluster, I think it checks that its been “optimized for virt storage”. Either apply the virt group or set the options you’ll find in /var/lib/glusterd/groups/virt.

Note that I don’t recommend the default settings for cluster.shd-max-threads & cluster.shd-wait-qlength. They can swamp your machines during heals unless you have a lot of cores and ram. You get a slightly faster heal, but often have VMs pausing for storage or other odd ball storage related errors. I prefer max-threads = 1 or maybe 2, and wait-qlength=1024 or 2048. These are per volume, so they hit harder than you think they will if you have a lot of volumes running.

Also make sure the gluster volumes themselves got set to 36.36 for owner.group, doesn’t matter for the bricks. Can do it with volume settings or mount the volume and set it manually.

Hope it helps!

  -Darrell


On Nov 15, 2018, at 6:28 AM, Thomas Simmons <twsnnva@gmail.com> wrote:

Hello All,

I recently took a new job in a RedHat shop and I'd like to move all of my homelab systems to RedHat upstream products to better align with what I manage at work. I had a "custom" (aka - hacked together) 3-node Hyperconverged XenServer cluster and would like to get this moved over to Ovirt (I'm currently testing with 4.2.7). Unfortunately, my storage is limited to software RAID with a 128GB SSD for cache. If at all possible, I would prefer to use ZFS (RAIDZ+ZIL+L2ARC) instead of MD RAID + lvmcache, however I'm not able to get this working and I'm not sure why. My ZFS and Gluster configuration is working - at least where I can manually mount all of my gluster volumes from all of my nodes, however, hosted-engine --deploy fails. I understand this isn't an out of the box configuration for Ovirt, however I see no reason why this shouldn't work. I would think this would be no different than using any other Gluster volume for the engine datastore, Am I missing something that would prevent this from working?

[ INFO  ] TASK [Add glusterfs storage domain]
[ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[Storage Domain target is unsupported]". HTTP response code is 400.
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "deprecations": [{"msg": "The 'ovirt_storage_domains' module is being renamed 'ovirt_storage_domain'", "version": 2.8}], "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Storage Domain target is unsupported]\". HTTP response code is 400."}

Even though it fails, it appears to have mounted and written __DIRECT_IO_TEST__ to my Gluster volume:

[root@vmh1 ~]# mount -t glusterfs localhost:/engine /mnt/engine/
[root@vmh1 ~]# ls /mnt/engine/
__DIRECT_IO_TEST__

If I cancel and try to run the deploy again, I get a different failure:

[ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[Error creating a storage domain]". HTTP response code is 400.
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "deprecations": [{"msg": "The 'ovirt_storage_domains' module is being renamed 'ovirt_storage_domain'", "version": 2.8}], "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Error creating a storage domain]\". HTTP response code is 400."}

Gluster seems ok...

[root@vmh1 /]# gluster volume info engine
 
Volume Name: engine
Type: Replicate
Volume ID: 2e34f8f5-0129-4ba5-983f-1eb5178deadc
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x 3 = 3
Transport-type: tcp
Bricks:
Brick1: vmh1-ib:/zpool1/engine
Brick2: vmh2-ib:/zpool1/engine
Brick3: vmh3-ib:/zpool1/engine
Options Reconfigured:
transport.address-family: inet
nfs.disable: on
performance.client-io-threads: off

ZFS looks good too...

[root@vmh1 ~]# ansible ovirthosts -m shell -a 'zpool status' -b
vmh1 | CHANGED | rc=0 >>
  pool: zpool1
 state: ONLINE
  scan: none requested
config:

NAME        STATE     READ WRITE CKSUM
zpool1      ONLINE       0     0     0
  sdc       ONLINE       0     0     0
  sdd       ONLINE       0     0     0
  sde       ONLINE       0     0     0
logs
  sdb2      ONLINE       0     0     0
cache
  sdb1      ONLINE       0     0     0

errors: No known data errors

vmh3 | CHANGED | rc=0 >>
  pool: zpool1
 state: ONLINE
  scan: none requested
config:

NAME        STATE     READ WRITE CKSUM
zpool1      ONLINE       0     0     0
  sdc       ONLINE       0     0     0
  sdd       ONLINE       0     0     0
  sde       ONLINE       0     0     0
logs
  sdb2      ONLINE       0     0     0
cache
  sdb1      ONLINE       0     0     0

errors: No known data errors

vmh2 | CHANGED | rc=0 >>
  pool: zpool1
 state: ONLINE
  scan: none requested
config:

NAME        STATE     READ WRITE CKSUM
zpool1      ONLINE       0     0     0
  sdc       ONLINE       0     0     0
  sdd       ONLINE       0     0     0
  sde       ONLINE       0     0     0
logs
  sdb2      ONLINE       0     0     0
cache
  sdb1      ONLINE       0     0     0

errors: No known data errors

Permissions seem ok

[root@vmh1 ~]# ansible ovirthosts -m shell -a 'ls -n /zpool1' -b
vmh3 | CHANGED | rc=0 >>
total 2
drwxr-xr-x. 3 36 36 3 Nov 15 04:56 data
drwxr-xr-x. 3 36 36 4 Nov 15 06:31 engine
drwxr-xr-x. 3 36 36 3 Nov 15 04:56 iso

vmh1 | CHANGED | rc=0 >>
total 2
drwxr-xr-x. 3 36 36 3 Nov 15 04:56 data
drwxr-xr-x. 3 36 36 4 Nov 15 06:31 engine
drwxr-xr-x. 3 36 36 3 Nov 15 04:56 iso

vmh2 | CHANGED | rc=0 >>
total 2
drwxr-xr-x. 3 36 36 3 Nov 15 04:56 data
drwxr-xr-x. 3 36 36 4 Nov 15 06:31 engine
drwxr-xr-x. 3 36 36 3 Nov 15 04:56 iso

_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-leave@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/SEZLAUIUSLR4UFHGQNS27KQ5Y5TIZDL6/