Hi,

JunOS supports LAG over links with different speeds, so if you have MX
series routers in-between, you can try to accomplish that.
But it's always better to be on safe side, it's very risky to use in
production, IMHO.

Best regards,
Misak Khachatryan

On Thu, Sep 14, 2017 at 2:41 PM, Yaniv Kaul <ykaul@redhat.com> wrote:
>
>
> On Thu, Sep 14, 2017 at 1:21 AM, Chris Adams <cma@cmadams.net> wrote:
>>
>> I have a small oVirt setup for one customer, with two servers each
>> connected to a two-switch stack with 1G links.  Now the customer would
>> like to upgrade the server links to 10G.  My question is this: can I add
>> a 10G NIC and do this with minimal "fuss" by just adding the 10G links
>> to the same LAG, then removing the 1G links?  I would have the host in
>> maintenance mode no matter what.
>
>
> I highly doubt that's feasible. They usually are in the same speeds...
> Y.
>
>>
>>
>> I haven't checked the switch to see if it'll support that yet, figured
>> I'd start on the oVirt side.
>>
>> --
>> Chris Adams <cma@cmadams.net>
>> _______________________________________________
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
> _______________________________________________
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users