And network configurations on node:

[root at ovirt-node] # brctl show
bridge name     bridge id               STP enabled     interfaces
docker0         8000.0242ae1de711       no
ovirtmgmt               8000.001320ff73aa       no              eth0

[root at ovirt-node] # ifconfig -a
docker0   Link encap:Ethernet  HWaddr 02:42:ae:1d:e7:11
          inet addr:172.17.0.1  Bcast:0.0.0.0  Mask:255.255.0.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth0      Link encap:Ethernet  HWaddr 00:13:20:ff:73:aa
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6331 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2866 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:762182 (744.3 KiB)  TX bytes:210611 (205.6 KiB)
          Interrupt:20 Memory:d1100000-d1120000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:36 errors:0 dropped:0 overruns:0 frame:0
          TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2478 (2.4 KiB)  TX bytes:2478 (2.4 KiB)

ovirtmgmt Link encap:Ethernet  HWaddr 00:13:20:ff:73:aa
          inet addr:128.224.165.170  Bcast:128.224.165.255  Mask:255.255.255.0
          inet6 addr: fe80::213:20ff:feff:73aa/64 Scope:Link
          inet6 addr: 11:2233:4455:6677:213:20ff:feff:73aa/64 Scope:Global
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6295 errors:0 dropped:6 overruns:0 frame:0
          TX packets:2831 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:644421 (629.3 KiB)  TX bytes:177616 (173.4 KiB)

sit0      Link encap:UNSPEC  HWaddr 00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 80:86:f2:8b:1d:cf
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)


Thanks,
Kai



On Tue, May 24, 2016 at 3:36 PM, Kai Kang <kai.7.kang@gmail.com> wrote:
Hi,

When I install a host, it fails with:

2016-05-24 07:00:01,749 ERROR [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is set to Non-Operational, it is missing the following networks: 'ovirtmgmt'
2016-05-24 07:00:01,781 WARN  [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID: 1bf36cd4, Job ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call Stack: null, Custom Event ID: -1, Message: Host node3 does not comply with the cluster Default networks, the following networks are missing on host: 'ovirtmgmt'

After I click the "Hosts" -> subtab "Network Interfaces" -> "Setup Host Networks" on the web ui and drag ovirtmgmt to "Assigned Logical" to link with eth0, then activate host "node3" successfully.

My question is how to make such manual operation automatically?  Then I can run some automatic tests.

Thanks a lot.

--Kai