Hi,

> Could you explain this a bit more?
> Did all NICs appear, or did to many NICs appear?

I'm used to udev leave my NIC in sequence.
And in this case it got messed up:
common:
eth0 -> port 1
eth1 -> port 2
ethx >> port X

What happened:
eth0 -> port 1
eth4 -> port 3
eth5 -> port 4
eth6 -> port 2

As follows attached file ..

Not a big problem .. But it confused me a little time to configure the network of 'nodes' ... Had to use tcpdump (thankfully that was available) to find out which interface belonged to what port Switch for CDP: P

2014/1/17 Fabian Deutsch <fabiand@redhat.com>

Hi Laercio,

Am Freitag, den 17.01.2014, 14:49 -0200 schrieb Laercio Motta:

> I tested the ISO here.

Thanks for being that brave! ;)

> - I was able to register with the engine and aprove (thing with
> 'oVirt-node-3.0.1-iso-1.0.2.vdsm.el6.iso' version was not possible)

Great that this works now.

> - Firewall: Being duplicated the rule of vdsm port (54321).
> - 'Sanlock' is being blocked by 'selinux' (audit.log attached)

Okay, those are probably bugs we need to take care of.

> - NIC was messy .. :P (eth0, eth4, eth5, eth6... )..

Could you explain this a bit more?
Did all NICs appear, or did to many NICs appear?

Thanks
fabian

>
>
>
> 2014/1/17 Fabian Deutsch <fabiand@redhat.com>
>         Hey,
>
>         as many of you have noticed there wasn't any well working
>         oVirt Node ISO
>         around for oVirt 3.3.
>         To get this ball rolling again I've put together a draft image
>         of ALPHA
>         quality. It contains many fixes some of us have been working
>         on over the
>         last weeks.
>
>         - Source & ISO -
>         To not drown Jenkins in a hell-of-a-patch-queue I've pushed
>         the patches to
>
>         https://github.com/fabiand/ovirt-node/tree/teamsync
>
>         The ISO built from that patchset can be found here:
>
>         http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.3-0.999.201401170926draft.vdsm.el6.iso
>
>         Please test this draft image and provide feedback on how it
>         works for
>         you.
>         If you encounter problems - and you probably will - please
>         take a look
>         here on how to debug them:
>
>         http://www.ovirt.org/Node_Troubleshooting
>
>         - Important Notes -
>         SELinux: Boot this alpha image with enforcing=0 to log
>         potential
>         denials, but not block the calls. To fix those denials
>         permanently
>         please attach your /var/log/audit/audit.log to a bug in
>         bugzilla.
>
>         Known problems:
>         - Exception is raised after registration to Engine
>         - Many bond devices are show on network page
>         - Denials appear in /var/log/audit/audit.log
>
>
>         And don't hesitate to reach out to us if you want to get more
>         involved
>         with Node.
>
>         - fabian
>
>
>
> --
> ╔══════════════════════════════════════════════╗
> ║▒▒▒▒▒▒▒▒▒▒▒ Laercio da Silva Motta ▒▒▒▒▒▒▒▒▒▒▒║
> ║----------------------------------------------║
> ║ Blog: http://www.laerciomotta.com/           ║
> ║ Twitter: http://twitter.com/#!/laerciomasala ║
> ║ Skype: laerciomasala                         ║
> ║ Chave PGP: http://bit.ly/kXS6ga              ║
> ╚═════════════════════════════════════════v1.0═╝

--
╔══════════════════════════════════════════════╗
║▒▒▒▒▒▒▒▒▒▒▒ Laercio da Silva Motta ▒▒▒▒▒▒▒▒▒▒▒║
║----------------------------------------------║
║ Blog: http://www.laerciomotta.com/           ║
║ Twitter: http://twitter.com/#!/laerciomasala ║
║ Skype: laerciomasala                         ║
║ Chave PGP: http://bit.ly/kXS6ga              ║
╚═════════════════════════════════════════v1.0═╝