As long as the switch is setup for 802.3AD (LACP) then you should be fine. I used the UI to setup my bond's and here is the output from my hypervisor

[root@virtnode-3 ~]# systemctl status NetworkManager

● NetworkManager.service - Network Manager

   Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled; vendor preset: enabled)

   Active: active (running) since Mon 2017-09-11 19:07:06 UTC; 1 day 16h ago

     Docs: man:NetworkManager(8)

 Main PID: 952 (NetworkManager)

   CGroup: /system.slice/NetworkManager.service

           └─952 /usr/sbin/NetworkManager --no-daemon


Sep 11 20:12:15 virtnode-3.fortnebula.com NetworkManager[952]: <info>  [1505160735.0612] ifcfg-rh: Ignoring connection /etc/sysconfig/network-scripts/ifcfg-storage (53b19d46-6b08-f...me:storage.

Sep 11 20:12:16 virtnode-3.fortnebula.com NetworkManager[952]: <info>  [1505160736.8563] device (p3p1): link connected

Sep 11 20:12:17 virtnode-3.fortnebula.com NetworkManager[952]: <info>  [1505160737.0798] device (p3p2): link connected

Sep 11 20:12:17 virtnode-3.fortnebula.com NetworkManager[952]: <info>  [1505160737.0839] device (bond0): link connected

Sep 11 20:12:17 virtnode-3.fortnebula.com NetworkManager[952]: <info>  [1505160737.7324] ifcfg-rh: new connection /etc/sysconfig/network-scripts/ifcfg-bond0.600 (cad7be9f-9e8c-bcab-4...m bond0.600")

Sep 11 20:12:17 virtnode-3.fortnebula.com NetworkManager[952]: <info>  [1505160737.7324] ifcfg-rh: Ignoring connection /etc/sysconfig/network-scripts/ifcfg-bond0.600 (cad7be9f-9e8c-b...me:bond0.600.

Sep 11 20:12:17 virtnode-3.fortnebula.com NetworkManager[952]: <info>  [1505160737.7533] manager: (bond0.600): new VLAN device (/org/freedesktop/NetworkManager/Devices/37)

Sep 11 20:12:17 virtnode-3.fortnebula.com NetworkManager[952]: <info>  [1505160737.7705] manager: (storage): new Bridge device (/org/freedesktop/NetworkManager/Devices/38)

Sep 11 20:12:17 virtnode-3.fortnebula.com NetworkManager[952]: <info>  [1505160737.7905] device (bond0.600): link connected

Sep 11 20:12:17 virtnode-3.fortnebula.com NetworkManager[952]: <info>  [1505160737.8477] device (storage): link connected

Hint: Some lines were ellipsized, use -l to show in full.

[root@virtnode-3 ~]# rpm -qa vdsm

vdsm-4.19.28-1.el7.centos.x86_64

[root@virtnode-3 ~]# 


On Wed, Sep 13, 2017 at 7:46 AM, Gianluca Cecchi <gianluca.cecchi@gmail.com> wrote:
On Wed, Sep 13, 2017 at 1:43 PM, Donny Davis <donny@fortnebula.com> wrote:
Just use the UI to manage your network interfaces. 


Just used and prolems arose... 
hence the question ;-)

In the mean time, as I have no control on network configuration from a switch point of view, I have asked network guys to verify.
My question was to verify that NM + 802.3AD is used ok from others