Hi Artur,
You are a champion! I can access oVirt now. Thank you so much.
One last question, can I create additional groups in ie. Read Only, etc? And then will this be done in KeyCloak or in the oVIrt UI?
Thank you
| Anton Louw | ||||||||||
| Cloud Engineer: Storage and Virtualization at Vox |
||||||||||
| T: 087 805 0000 | D: 087 805 1572 M: N/A E: anton.louw@voxtelecom.co.za A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg www.vox.co.za |
||||||||||
From: Artur Socha <asocha@redhat.com>
Sent: 22 April 2020 13:21
To: Anton Louw <Anton.Louw@voxtelecom.co.za>; users@ovirt.org
Subject: Re: [ovirt-users] oVirt and KeyCloak intergration
On Wed, 2020-04-22 at 13:09 +0200, Artur Socha wrote:
> On Wed, 2020-04-22 at 10:42 +0000, Anton Louw wrote:
> >
> > Ok so this is definitely looking better. I get an error, but at least now it
> > is saying : “The user admin@openidchttp is not authorized to perform login”
> >
> > This is strange though, because admin in by default should be allowed
> > access?
>
> Well, yes and no :)
>
> In order for user to be considered admin (for ovirt engine) it must belong to
> keycloak's ovirt-administrator group (in keycloak admin panel see Manage-
> > Groups->Members)
Small clarification:
In keycloak admin panel see Manage-> Groups-> 'ovirt-administrator' -> Members
Note that the group must have the exact name: ovirt-administrator
>
> I think you are very close to have it up-and-running.
>
>
> >
> > From: Anton Louw
> > Sent: 22 April 2020 12:38
> > To: Artur Socha <asocha@redhat.com>;
users@ovirt.org
> > Subject: RE: [ovirt-users] oVirt and KeyCloak intergration
> >
> > Perfect, I’ll test and let you know.
> >
> > Thanks
> >
> > From: Artur Socha <asocha@redhat.com>
> > Sent: 22 April 2020 12:32
> > To: Anton Louw <Anton.Louw@voxtelecom.co.za>;
users@ovirt.org
> > Subject: Re: [ovirt-users] oVirt and KeyCloak intergration
> >
> > + users@ovirt.org
> >
> > On Wed, 2020-04-22 at 09:57 +0000, Anton Louw wrote:
> > >
> > >
> > > Hi Artur,
> > >
> > > I would just like to make sure I am following correctly, comparing your
> > > entries against mine.
> > >
> > > Your setup:
> > > ...
> > > config.mapAuthRecord.regex.pattern =
> > > ^(?<user>.*?)((\\\\(?<at>@)(?<suffix>.*?)@.*)|(?<realm>@.*))$
> > > ...
> > >
> > >
> > > My setup:
> > > …
> > > config.mapAuthRecord.regex.pattern =
> > > ^(?<user>.*?)((\\(?<at>@)(?<suffix>.*?)@.*)|(?<realm>@.*))$
> > > …
> > >
> > > Should I add the additional 2 “\\” in on my side?
> >
> >
> > Yes, please try adding it. In my case I learned about this issue by
> > debugging
> > the code because the real exception generated by incorrect regexp syntax was
> > hidden behind generic error message giving no clues about the true cause.
> >
> > >
> > > Your setup:
> > > ...
> > > <LocationMatch ^/ovirt-engine/sso/(interactive-login-
> > > negotiate|oauth/token-
> > > http-auth)|^/ovirt-engine/callback>
> > > <If "req('Authorization') !~ /^(Bearer|Basic)/i">
> > >
> > > Require valid-user
> > > AuthType openid-connect
> > >
> > > ErrorDocument 401 "<html><meta http-equiv=\"refresh\"content=\"0;
> > > url=/ovirt-engine/sso/login-unauthorized\"/><body><ahref=\"/ovirt-
> > > engine/sso/login-unauthorized\">Here</a></body></html>"
> > > </If>
> > > </LocationMatch>
> > > …
> > >
> > > My setup:
> > > …
> > > <LocationMatch ^/ovirt-engine/sso/(interactive-login-
> > > negotiate|oauth/token-
> > > http-auth)|^/ovirt-engine/callback>
> > > <If "req('Authorization') !~ /^(Bearer|Basic)/i">
> > >
> > > Require valid-user
> > > AuthType openid-connect
> > >
> > > ErrorDocument 401 "<html><meta http-equiv='refresh' content='0;
> > > url=/ovirt-engine/sso/login-unauthorized'/><body><a href='/ovirt-
> > > engine/sso/login-unauthorized'>Here</a></body></html>"
> > > </If>
> > > </LocationMatch>
> > > …
> > >
> > > I remember I had syntax errors, but mine was changed.
> > >
> > > Does this look fine to you?
> >
> >
> > Yeah, your version looks good too. You have ' instead of " so that is ok.
> >
> >
> > Anton Louw
> > Cloud Engineer: Storage and Virtualization at Vox
> > T: 087 805 0000 | D: 087 805 1572
> > M: N/A
> > E: anton.louw@voxtelecom.co.za
> > A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
> >
www.vox.co.za
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > > Thanks
> > >
> > >
> > >
> > > Anton Louw
> > > Cloud Engineer: Storage and Virtualization at Vox
> > > T: 087 805 0000 | D: 087 805 1572
> > > M: N/A
> > > E: anton.louw@voxtelecom.co.za
> > > A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
> > >
www.vox.co.za
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > From: Anton Louw
> > > Sent: 22 April 2020 10:07
> > > To: Artur Socha <asocha@redhat.com>
> > > Subject: RE: [ovirt-users] oVirt and KeyCloak intergration
> > >
> > > Hi Artur,
> > >
> > > Great, I will try the below and let you know. I appreciate your efforts.
> > >
> > > Sure, you may report it, I was in such a rush that I only hit “reply” and
> > > not “Reply All”
> > >
> > > I do recall that I had to make some changes to the below as the it
> > > complained about syntax errors:
> > >
> > > ErrorDocument 401 "<html><meta http-equiv=\"refresh\"
> > > content=\"0; url=/ovirt-engine/sso/login-unauthorized\"/><body><a
> > > href=\"/ovirt-engine/sso/login-unauthorized\">Here</a></body></html>"
> > > </If>
> > > </LocationMatch>
> > >
> > > I will let you know the outcome when I change the below as you suggested.
> > >
> > > Cheers
> > >
> > > From: Artur Socha <asocha@redhat.com>
> > > Sent: 22 April 2020 09:51
> > > To: Anton Louw <Anton.Louw@voxtelecom.co.za>
> > > Subject: Re: [ovirt-users] oVirt and KeyCloak intergration
> > >
> > > I checked your logs and I did not notice anything suspicious.
> > > However, now I recall I made some changes compared to blog post
> > > example:
> > >
> > > 1) /etc/ovirt-engine/extensions.d/openid-http-mapping.properties
> > > I added escaping in regexp for '\'
> > > ...
> > > config.mapAuthRecord.regex.pattern =
> > > ^(?<user>.*?)((\\\\(?<at>@)(?<suffix>.*?)@.*)|(?<realm>@.*))$
> > > ...
> > >
> > > 2) /etc/httpd/ovirt-openidc.conf
> > > Escaping for '"' in error document snippet
> > > ...
> > > <LocationMatch ^/ovirt-engine/sso/(interactive-login-
> > > negotiate|oauth/token-http-auth)|^/ovirt-engine/callback>
> > > <If "req('Authorization') !~ /^(Bearer|Basic)/i">
> > >
> > > Require valid-user
> > > AuthType openid-connect
> > >
> > > ErrorDocument 401 "<html><meta http-equiv=\"refresh\"
> > > content=\"0; url=/ovirt-engine/sso/login-unauthorized\"/><body><a
> > > href=\"/ovirt-engine/sso/login-unauthorized\">Here</a></body></html>"
> > > </If>
> > > </LocationMatch>
> > >
> > > ...
> > >
> > > These two issues were most probably caused by the blog site rendering.
> > >
> > >
> > > You might want to check engine.log (or server.log not really sure which
> > > one was that) for aaa extension initialization logs. They should
> > > appear at the beginning just after restarting engine.
> > >
> > > Unfortunately, at the moment I do not have running keycloak setup (I
> > > used to have a local VM) but I will try to find some time to set it up
> > > again once I'm done with another work item that actually consumes
> > > almost entire disk space for my 2 machines)
> > >
> > > Please let me know if anything changes after applying these config
> > > changes. It this works for you then I will request the blog post to be
> > > updated.
> > >
> > > Do you mind if I keep(re-post) this discussion back to users@ovirt in
> > > case other might have similar issues with keycloak integration?
> > >
> > > A.
> > >
> > > On Wed, 2020-04-22 at 06:35 +0000, Anton Louw wrote:
> > > >
> > > > Hi Artru,
> > > >
> > > > Thank you for the reply. The post [1] is actually the main source of
> > > > information I worked from in order top get everything configured. In
> > > > the post[1] I ran through the whole testing section, and everything
> > > > works as expected. I can see the VMs etc when using the python
> > > > script.
> > > >
> > > > In my case we are not using ldap as a provider, I tried using
> > > > keycloak directly as a provider, I am not sure if that is where I am
> > > > going wrong?
> > > >
> > > > I have attached the last part of the apache ssl_access_log when I
> > > > tried logging in this morning. I have also attached the engine log.
> > > >
> > > > Thanks
> > > >
> > > >
> > > > Anton Louw
> > > > Cloud Engineer: Storage and Virtualization at Vox
> > > > T: 087 805 0000 | D: 087 805 1572
> > > > M: N/A
> > > > E: anton.louw@voxtelecom.co.za
> > > > A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
> > > >
www.vox.co.za
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > From: Artru Socha <asocha@redhat.com>
> > > > Sent: 21 April 2020 15:20
> > > > To: Anton Louw <Anton.Louw@voxtelecom.co.za>;
users@ovirt.org
> > > > Subject: Re: [ovirt-users] oVirt and KeyCloak intergration
> > > >
> > > > On Tue, 2020-04-21 at 12:48 +0000, Anton Louw wrote:
> > > > >
> > > > > Hi Everybody,
> > > > >
> > > > >
> > > > Hi Anton,
> > > >
> > > > > Has anybody gone the route of using KeyCloak to login to oVirt?
> > > > > KeyCloak has been configured and the neccesary configs have also
> > > > been
> > > > > done on the engine. It redirects perfectly from the oVirt Web Login
> > > > > page to KeyCloak, but after logging into KeyCloak, I get redirected
> > > > > back to the oVirt Web Login. When trying to login again, I get the
> > > > > below error:
> > > > >
> > > > >
> > > > >
> > > > > server_error: Missing parameter: 'params'
> > > > >
> > > >
> > > > Not so long ago I managed to setup ovirt engine with keyloack (using
> > > > ldap as users provider). Hopefully, I would be able to help you with
> > > > it.
> > > >
> > > > There is excellent blog post[1] available. You might also check
> > > > keycloak+ldap post [2], however, when I was working on the
> > > > integration
> > > > I was not aware of if and did not test it.
> > > >
> > > > The error you mentioned does not really indicate what exactly is
> > > > wrong
> > > > but it might suggest that there is some sort of misconfiguration with
> > > > apache (you need to install and configure mod_auth_openidc as
> > > > described
> > > > at [1]). At least that happened in my case.
> > > >
> > > > In case you have already gone through it you could probably check
> > > > apache logs.
> > > >
> > > > Under [1] there is a python script that can be used to check api
> > > > calls,
> > > > please update username/password and test it against your environment.
> > > >
> > > >
> > > > Would it be possible post relevant piece of apache logs together with
> > > > engine.log ?
> > > >
> > > >
> > > > [1]
> > > >
> > >
https://blogs.ovirt.org/2019/01/federate-ovirt-engine-authentication-to-openid-connect-infrastructure/
> > > > [2]
> > > >
> > >
https://blogs.ovirt.org/2018/08/ovirt-saml-with-keyloak-using-389ds-user-federation/
> > > > Artur
> > > >
> > > >
> > > >
> > > > > I have checked all the logs, but nothing is telling me what exactly
> > > > > the issue is.
> > > > >
> > > > > If anybody has any idea, please let me know.
> > > > >
> > > > > Thanks
> > > > >
> > > > > Anton Louw
> > > > > Cloud Engineer: Storage and Virtualization at Vox
> > > > > T: 087 805 0000 | D: 087 805 1572
> > > > > M: N/A
> > > > > E: anton.louw@voxtelecom.co.za
> > > > > A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
> > > > >
www.vox.co.za
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Disclaimer
> > > > > The contents of this email are confidential to the sender and the
> > > > > intended recipient. Unless the contents are clearly and entirely of
> > > > a
> > > > > personal nature, they are subject to copyright in favour of the
> > > > > holding company of the Vox group of companies. Any recipient who
> > > > > receives this email in error should immediately report the error to
> > > > > the sender and permanently delete this email from all storage
> > > > > devices.
> > > > >
> > > > > This email has been scanned for viruses and malware, and may have
> > > > > been automatically archived by Mimecast Ltd, an innovator in
> > > > Software
> > > > > as a Service (SaaS) for business. Providing a safer and more useful
> > > > > place for your human generated data. Specializing in; Security,
> > > > > archiving and compliance. To find out more Click Here.
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Users mailing list -- users@ovirt.org
> > > > > To unsubscribe send an email to
users-leave@ovirt.org
> > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > oVirt Code of Conduct:
> > > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > List Archives:
> > > > >
> > >
https://lists.ovirt.org/archives/list/users@ovirt.org/message/S4I2I3MID4A4AYXVOLWKU55563DFKEFQ/
> > >