This means that most probably you are hitting a Firmware issue. (Most probably doesn't mean 100%).
Steps I would do:
- Check if latest iLO firmware is deployed (recently iLo4 got an update)
- Check that BIOS is up to date
- Check that HDD/Controller Firmware is up to date

Both iLO and HDD updates are not added in the HP SPP, as Gen8 is no longer actively supported.

Next, run the HP sum from 2017.04.00 (https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_3f6b4074ed734dc3baf007612d) that is the latest for Gen8

Check the IML logs and for further hardware-related topics check the HPE community.

Best Regards,
Strahil Nikolov
В събота, 8 януари 2022 г., 19:57:52 Гринуич+2, Diggy Mc <d03@bornfree.org> написа:


> Hi Diggy,
>
> I'm not sure if it's an oVirt issue, but it can be a network or firewall issue.
> Did you test the connection between oVirt hosts and the iLO interfaces?
> Simple tests like ping to ensure one host can reach others iLO interfaces and ipmitool to
> ensure you can connect to the management interfaces?
>
> Marcos
>

It is not network or firewall related.  There is no firewall between the oVirt hosts/engine and the iLO interfaces.  When I configured oVirt power management, the offered test passed.  I'm not running IPMI.  On a side note, the problem exists both before and after enabling oVirt's power management feature.

_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-leave@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/OZ4ITKNEGD5MITTYMMPONQQ23EFJQFEY/