Attached my log file.
hi guys,I'am tryed install Ovirt 3.2 all-in-one in my Fedora 18, but this version not finish for sucessful install, information my enviroment:[root@firelap ovirt]# cat /etc/redhat-releaseFedora release 18 (Spherical Cow)[root@firelap ovirt]# uname -aLinux firelap 3.7.9-205.fc18.x86_64 #1 SMP Sun Feb 24 20:10:02 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
[root@firelap ovirt]# ifconfigbond0: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)RX packets 0 bytes 0 (0.0 B)RX errors 0 dropped 0 overruns 0 frame 0TX packets 0 bytes 0 (0.0 B)TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0bond1: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)RX packets 0 bytes 0 (0.0 B)RX errors 0 dropped 0 overruns 0 frame 0TX packets 0 bytes 0 (0.0 B)TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0bond2: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)RX packets 0 bytes 0 (0.0 B)RX errors 0 dropped 0 overruns 0 frame 0TX packets 0 bytes 0 (0.0 B)TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0bond3: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)RX packets 0 bytes 0 (0.0 B)RX errors 0 dropped 0 overruns 0 frame 0TX packets 0 bytes 0 (0.0 B)TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0bond4: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)RX packets 0 bytes 0 (0.0 B)RX errors 0 dropped 0 overruns 0 frame 0TX packets 0 bytes 0 (0.0 B)TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536inet 127.0.0.1 netmask 255.0.0.0inet6 ::1 prefixlen 128 scopeid 0x10<host>loop txqueuelen 0 (Local Loopback)RX packets 136972 bytes 54834621 (52.2 MiB)RX errors 0 dropped 0 overruns 0 frame 0TX packets 136972 bytes 54834621 (52.2 MiB)TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0p5p1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500inet 172.16.255.43 netmask 255.255.255.192 broadcast 172.16.255.63inet6 fe80::7a45:c4ff:feb0:8995 prefixlen 64 scopeid 0x20<link>ether 78:45:c4:b0:89:95 txqueuelen 1000 (Ethernet)RX packets 480681 bytes 614801393 (586.3 MiB)RX errors 0 dropped 0 overruns 0 frame 0TX packets 323373 bytes 35479386 (33.8 MiB)TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0device interrupt 17[root@firelap ovirt]# rpm -qa | grep ovirtovirt-engine-cli-3.2.0.10-1.fc18.noarchovirt-engine-backend-3.2.0-4.fc18.noarchovirt-engine-config-3.2.0-4.fc18.noarchovirt-host-deploy-1.0.0-1.fc18.noarchovirt-engine-setup-plugin-allinone-3.2.0-4.fc18.noarchovirt-engine-restapi-3.2.0-4.fc18.noarchovirt-engine-dbscripts-3.2.0-4.fc18.noarchovirt-image-uploader-3.2.0-1.fc18.noarchovirt-host-deploy-offline-1.0.0-1.fc18.noarchovirt-engine-setup-3.2.0-4.fc18.noarchovirt-release-fedora-5-3.noarchovirt-engine-tools-common-3.2.0-4.fc18.noarchovirt-engine-3.2.0-4.fc18.noarchovirt-log-collector-3.2.0-1.fc18.noarchovirt-host-deploy-java-1.0.0-1.fc18.noarchovirt-engine-userportal-3.2.0-4.fc18.noarchovirt-engine-notification-service-3.2.0-4.fc18.noarchovirt-iso-uploader-3.2.0-1.fc18.noarchovirt-engine-webadmin-portal-3.2.0-4.fc18.noarchovirt-engine-sdk-3.2.0.9-1.fc18.noarchovirt-engine-genericapi-3.2.0-4.fc18.noarch[root@firelap ~]# host firelap.usc.unirede.netfirelap.usc.unirede.net has address 172.16.255.43[root@firelap ~]# ping firelap.usc.unirede.netPING firelap.usc.unirede.net (172.16.255.43) 56(84) bytes of data.64 bytes from firelap (172.16.255.43): icmp_seq=1 ttl=64 time=0.055 ms[root@firelap ~]# engine-setupWelcome to oVirt Engine setup utilityoVirt Engine uses httpd to proxy requests to the application server.It looks like the httpd installed locally is being actively used.The installer can override current configuration .Alternatively you can use JBoss directly (on ports higher than 1024)Do you wish to override current httpd configuration and restart the service? ['yes'| 'no'] [yes] :HTTP Port [80] :HTTPS Port [443] :Host fully qualified domain name. Note: this name should be fully resolvable [firelap.no-ip.org] : localhost.localdomainThe IP (127.0.0.1) which was resolved from the FQDN localhost.localdomain is not configured on any interface on this hostUser input failed validation, do you still wish to use it? (yes|no): noHost fully qualified domain name. Note: this name should be fully resolvable [firelap.no-ip.org] :firelap.no-ip.org did not resolve into an IP addressUser input failed validation, do you still wish to use it? (yes|no): noHost fully qualified domain name. Note: this name should be fully resolvable [firelap.no-ip.org] : firelap.usc.unirede.netEnter a password for an internal oVirt Engine administrator user (admin@internal) :Warning: Weak Password.Confirm password :Organization Name for the Certificate [no-ip.org] : firelap.usc.unirede.netThe engine can be configured to present the UI in three different application modes. virt [Manage virtualization only], gluster [Manage gluster storage only], and both [Manage virtualization as well as gluster storage] ['virt'| 'gluster'| 'both'] [both] :The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'| 'POSIXFS'] [NFS] :Enter DB type for installation ['remote'| 'local'] [local] :Enter a password for a local oVirt Engine DB admin user (engine) :Warning: Weak Password.Confirm password :Local ISO domain path [/var/lib/exports/iso] : /firebackup/ovirt/isoError: directory /firebackup/ovirt/iso is not emptyLocal ISO domain path [/var/lib/exports/iso] : /firebackup/ovirt/isoFirewall ports need to be opened.The installer can configure firewall automatically overriding the current configuration. The old configuration will be backed up.Alternately you can configure the firewall later using an example file.Which firewall do you wish to configure? ['None'| 'Firewalld'| 'IPTables']: IPTablesConfigure VDSM on this host? ['yes'| 'no'] [yes] :Local storage domain path [/var/lib/images] : /firebackup/ovirt/vmsConfirm root password :oVirt Engine will be installed using the following configuration:=================================================================override-httpd-config: yeshttp-port: 80https-port: 443host-fqdn: firelap.usc.unirede.netauth-pass: ********org-name: firelap.usc.unirede.netapplication-mode: bothdefault-dc-type: NFSdb-remote-install: localdb-local-pass: ********nfs-mp: /firebackup/ovirt/isooverride-firewall: IPTablesconfig-allinone: yesstorage-path: /firebackup/ovirt/vmssuperuser-pass: ********Proceed with the configuration listed above? (yes|no): yesInstalling:AIO: Validating CPU Compatibility... [ DONE ]AIO: Adding firewall rules... [ DONE ]Configuring oVirt Engine... [ DONE ]Configuring JVM... [ DONE ]Creating CA... [ DONE ]Updating ovirt-engine service... [ DONE ]Setting Database Configuration... [ DONE ]Setting Database Security... [ DONE ]Creating Database... [ DONE ]Updating the Default Data Center Storage Type... [ DONE ]Editing oVirt Engine Configuration... [ DONE ]Editing Postgresql Configuration... [ DONE ]Configuring the Default ISO Domain... [ DONE ]Configuring Firewall... [ DONE ]Starting ovirt-engine Service... [ DONE ]Configuring HTTPD... [ DONE ]AIO: Creating storage directory... [ DONE ]AIO: Adding Local Datacenter and cluster... [ DONE ]AIO: Adding Local host (This may take several minutes)... [ ERROR ]Error: Host was found in a 'Failed' state. Please check engine and bootstrap installation logs.Please check log file /var/log/ovirt-engine/engine-setup_2013_03_06_14_30_51.log for more information2013-03-06 14:35:34::DEBUG::common_utils::474::root:: retcode = 02013-03-06 14:35:34::DEBUG::common_utils::1238::root:: stopping httpd2013-03-06 14:35:34::DEBUG::common_utils::1275::root:: executing action httpd on service stop2013-03-06 14:35:34::DEBUG::common_utils::434::root:: Executing command --> '/sbin/service httpd stop'2013-03-06 14:35:34::DEBUG::common_utils::472::root:: output =2013-03-06 14:35:34::DEBUG::common_utils::473::root:: stderr = Redirecting to /bin/systemctl stop httpd.service2013-03-06 14:35:34::DEBUG::common_utils::474::root:: retcode = 02013-03-06 14:35:34::DEBUG::common_utils::1228::root:: starting httpd2013-03-06 14:35:34::DEBUG::common_utils::1275::root:: executing action httpd on service start2013-03-06 14:35:34::DEBUG::common_utils::434::root:: Executing command --> '/sbin/service httpd start'2013-03-06 14:35:36::DEBUG::common_utils::472::root:: output =2013-03-06 14:35:36::DEBUG::common_utils::473::root:: stderr = Redirecting to /bin/systemctl start httpd.service2013-03-06 14:35:36::DEBUG::common_utils::474::root:: retcode = 02013-03-06 14:35:36::DEBUG::setup_sequences::59::root:: running makeStorageDir2013-03-06 14:35:36::DEBUG::all_in_one_100::368::root:: Creating/Verifying local domain path2013-03-06 14:35:36::DEBUG::all_in_one_100::374::root:: Setting selinux context2013-03-06 14:35:36::DEBUG::nfsutils::36::root:: setting selinux context for /firebackup/ovirt/vms2013-03-06 14:35:36::DEBUG::common_utils::434::root:: Executing command --> '/usr/sbin/semanage fcontext -a -t public_content_rw_t /firebackup/ovirt/vms(/.*)?'2013-03-06 14:35:39::DEBUG::common_utils::472::root:: output =2013-03-06 14:35:39::DEBUG::common_utils::473::root:: stderr =2013-03-06 14:35:39::DEBUG::common_utils::474::root:: retcode = 02013-03-06 14:35:39::DEBUG::common_utils::434::root:: Executing command --> '/sbin/restorecon -r /firebackup/ovirt/vms'2013-03-06 14:35:39::DEBUG::common_utils::472::root:: output =2013-03-06 14:35:39::DEBUG::common_utils::473::root:: stderr =2013-03-06 14:35:39::DEBUG::common_utils::474::root:: retcode = 02013-03-06 14:35:39::DEBUG::setup_sequences::59::root:: running waitForJbossUp2013-03-06 14:35:39::DEBUG::all_in_one_100::445::root:: Checking JBoss status.2013-03-06 14:35:39::INFO::all_in_one_100::448::root:: JBoss is up and running.2013-03-06 14:35:39::DEBUG::setup_sequences::59::root:: running initAPI2013-03-06 14:35:39::DEBUG::all_in_one_100::240::root:: Initiating the API object2013-03-06 14:35:41::DEBUG::setup_sequences::59::root:: running createDC2013-03-06 14:35:41::DEBUG::all_in_one_100::256::root:: Creating the local datacenter2013-03-06 14:35:42::DEBUG::setup_sequences::59::root:: running createCluster2013-03-06 14:35:42::DEBUG::all_in_one_100::267::root:: Creating the local cluster2013-03-06 14:35:43::DEBUG::setup_sequences::59::root:: running createHost2013-03-06 14:35:43::DEBUG::all_in_one_100::280::root:: Adding the local host2013-03-06 14:35:44::DEBUG::setup_sequences::59::root:: running waitForHostUp2013-03-06 14:35:44::DEBUG::all_in_one_100::297::root:: Waiting for host to become operational2013-03-06 14:35:45::DEBUG::all_in_one_100::300::root:: current host status is: installing2013-03-06 14:35:45::DEBUG::all_in_one_100::311::root:: Traceback (most recent call last):File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 308, in isHostUpraise Exception(INFO_CREATE_HOST_WAITING_UP)Exception: Waiting for the host to start2013-03-06 14:35:50::DEBUG::all_in_one_100::297::root:: Waiting for host to become operational2013-03-06 14:35:50::DEBUG::all_in_one_100::300::root:: current host status is: installing2013-03-06 14:35:50::DEBUG::all_in_one_100::311::root:: Traceback (most recent call last):File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 308, in isHostUpraise Exception(INFO_CREATE_HOST_WAITING_UP)Exception: Waiting for the host to start2013-03-06 14:35:55::DEBUG::all_in_one_100::297::root:: Waiting for host to become operational2013-03-06 14:35:56::DEBUG::all_in_one_100::300::root:: current host status is: install_failed2013-03-06 14:35:56::DEBUG::all_in_one_100::311::root:: Traceback (most recent call last):File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 306, in isHostUpraise utils.RetryFailException(ERROR_CREATE_HOST_FAILED)RetryFailException: Error: Host was found in a 'Failed' state. Please check engine and bootstrap installation logs.2013-03-06 14:35:56::DEBUG::setup_sequences::62::root:: Traceback (most recent call last):File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in runfunction()File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 294, in waitForHostUputils.retry(isHostUp, tries=120, timeout=600, sleep=5)File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1009, in retryraise eRetryFailException: Error: Host was found in a 'Failed' state. Please check engine and bootstrap installation logs.2013-03-06 14:35:56::DEBUG::engine-setup::1948::root:: *** The following params were used as user input:2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: override-httpd-config: yes2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: http-port: 802013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: https-port: 4432013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: random-passwords: no2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: mac-range: 00:1A:4A:10:FF:00-00:1A:4A:10:FF:FF2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: host-fqdn: firelap.usc.unirede.net2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: auth-pass: ********2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: org-name: firelap.usc.unirede.net2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: application-mode: both2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: default-dc-type: NFS2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-remote-install: local2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-host: localhost2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-local-pass: ********2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: nfs-mp: /firebackup/********/iso2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: iso-domain-name: ISO_DOMAIN2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: config-nfs: yes2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: override-firewall: IPTables2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: config-allinone: yes2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: storage-path: /firebackup/********/vms2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: superuser-pass: ********2013-03-06 14:35:56::ERROR::engine-setup::2369::root:: Traceback (most recent call last):File "/bin/engine-setup", line 2363, in <module>main(confFile)File "/bin/engine-setup", line 2146, in mainrunSequences()File "/bin/engine-setup", line 2068, in runSequencescontroller.runAllSequences()File "/usr/share/ovirt-engine/scripts/setup_controller.py", line 54, in runAllSequencessequence.run()File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 154, in runstep.run()File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in runfunction()File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 294, in waitForHostUputils.retry(isHostUp, tries=120, timeout=600, sleep=5)File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1009, in retryraise eRetryFailException: Error: Host was found in a 'Failed' state. Please check engine and bootstrap installation logs.Thnkz for attention.Marcelo Barbosa