Sorry, I mistakenly send the email:

Below is the output of:
[root@glustermount ~]# systemctl status ovirt-imageio-daemon.service -l
● ovirt-imageio-daemon.service - oVirt ImageIO Daemon
   Loaded: loaded (/usr/lib/systemd/system/ovirt-imageio-daemon.service; disabled; vendor preset: disabled)
   Active: failed (Result: start-limit) since Tue 2018-09-04 16:55:16 SAST; 19h ago
Condition: start condition failed at Wed 2018-09-05 11:56:46 SAST; 2min 9s ago
           ConditionPathExists=/etc/pki/vdsm/certs/vdsmcert.pem was not met
  Process: 11345 ExecStart=/usr/bin/ovirt-imageio-daemon (code=exited, status=1/FAILURE)
 Main PID: 11345 (code=exited, status=1/FAILURE)

Sep 04 16:55:16 glustermount.goku systemd[1]: Failed to start oVirt ImageIO Daemon.
Sep 04 16:55:16 glustermount.goku systemd[1]: Unit ovirt-imageio-daemon.service entered failed state.
Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service failed.
Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service holdoff time over, scheduling restart.
Sep 04 16:55:16 glustermount.goku systemd[1]: start request repeated too quickly for ovirt-imageio-daemon.service
Sep 04 16:55:16 glustermount.goku systemd[1]: Failed to start oVirt ImageIO Daemon.
Sep 04 16:55:16 glustermount.goku systemd[1]: Unit ovirt-imageio-daemon.service entered failed state.
Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service failed.
[root@glustermount ~]# journalctl -xe -u ovirt-imageio-daemon.service
Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: File "/usr/lib64/python2.7/logging/handlers.py",
Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: BaseRotatingHandler.__init__(self, filename, mode
Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: File "/usr/lib64/python2.7/logging/handlers.py",
Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: logging.FileHandler.__init__(self, filename, mode
Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: File "/usr/lib64/python2.7/logging/__init__.py",
Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: StreamHandler.__init__(self, self._open())
Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: File "/usr/lib64/python2.7/logging/__init__.py",
Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: stream = open(self.baseFilename, self.mode)
Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: IOError: [Errno 2] No such file or directory: '/v
Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service: main process exited, code=exited, st
Sep 04 16:55:16 glustermount.goku systemd[1]: Failed to start oVirt ImageIO Daemon.
-- Subject: Unit ovirt-imageio-daemon.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit ovirt-imageio-daemon.service has failed.
--
-- The result is failed.
Sep 04 16:55:16 glustermount.goku systemd[1]: Unit ovirt-imageio-daemon.service entered failed state.
Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service failed.
Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service holdoff time over, scheduling restart
Sep 04 16:55:16 glustermount.goku systemd[1]: start request repeated too quickly for ovirt-imageio-daemon.servic
Sep 04 16:55:16 glustermount.goku systemd[1]: Failed to start oVirt ImageIO Daemon.
-- Subject: Unit ovirt-imageio-daemon.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit ovirt-imageio-daemon.service has failed.
--
-- The result is failed.
Sep 04 16:55:16 glustermount.goku systemd[1]: Unit ovirt-imageio-daemon.service entered failed state.
Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service failed.


On Wed, Sep 5, 2018 at 12:01 PM, Sakhi Hadebe <sakhi@sanren.ac.za> wrote:
# systemctl status ovirt-imageio-daemon.service
● ovirt-imageio-daemon.service - oVirt ImageIO Daemon
   Loaded: loaded (/usr/lib/systemd/system/ovirt-imageio-daemon.service; disabled; vendor preset: disabled)
   Active: failed (Result: start-limit) since Tue 2018-09-04 16:55:16 SAST; 19h ago
Condition: start condition failed at Wed 2018-09-05 11:56:46 SAST; 1min 58s ago
           ConditionPathExists=/etc/pki/vdsm/certs/vdsmcert.pem was not met
  Process: 11345 ExecStart=/usr/bin/ovirt-imageio-daemon (code=exited, status=1/FAILURE)
 Main PID: 11345 (code=exited, status=1/FAILURE)

Sep 04 16:55:16 glustermount.goku systemd[1]: Failed to start oVirt ImageIO Daemon.
Sep 04 16:55:16 glustermount.goku systemd[1]: Unit ovirt-imageio-daemon.service entered failed state.
Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service failed.
Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service holdoff time over, scheduling ...art.
Sep 04 16:55:16 glustermount.goku systemd[1]: start request repeated too quickly for ovirt-imageio-daemon...vice
Sep 04 16:55:16 glustermount.goku systemd[1]: Failed to start oVirt ImageIO Daemon.
Sep 04 16:55:16 glustermount.goku systemd[1]: Unit ovirt-imageio-daemon.service entered failed state.
Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service failed.
Hint: Some lines were ellipsized, use -l to show in full.
[root@glustermount ~]# systemctl status ovirt-imageio-daemon.service -l
● ovirt-imageio-daemon.service - oVirt ImageIO Daemon
   Loaded: loaded (/usr/lib/systemd/system/ovirt-imageio-daemon.service; disabled; vendor preset: disabled)
   Active: failed (Result: start-limit) since Tue 2018-09-04 16:55:16 SAST; 19h ago
Condition: start condition failed at Wed 2018-09-05 11:56:46 SAST; 2min 9s ago
           ConditionPathExists=/etc/pki/vdsm/certs/vdsmcert.pem was not met
  Process: 11345 ExecStart=/usr/bin/ovirt-imageio-daemon (code=exited, status=1/FAILURE)
 Main PID: 11345 (code=exited, status=1/FAILURE)

Sep 04 16:55:16 glustermount.goku systemd[1]: Failed to start oVirt ImageIO Daemon.
Sep 04 16:55:16 glustermount.goku systemd[1]: Unit ovirt-imageio-daemon.service entered failed state.
Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service failed.
Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service holdoff time over, scheduling restart.
Sep 04 16:55:16 glustermount.goku systemd[1]: start request repeated too quickly for ovirt-imageio-daemon.service
Sep 04 16:55:16 glustermount.goku systemd[1]: Failed to start oVirt ImageIO Daemon.
Sep 04 16:55:16 glustermount.goku systemd[1]: Unit ovirt-imageio-daemon.service entered failed state.
Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service failed.

Output of:

On Wed, Sep 5, 2018 at 11:35 AM, Simone Tiraboschi <stirabos@redhat.com> wrote:


On Wed, Sep 5, 2018 at 11:10 AM Sakhi Hadebe <sakhi@sanren.ac.za> wrote:
Hi All,

The host deploy logs are showing the below errors:

[root@garlic engine-logs-2018-09-05T08:48:22Z]# cat /var/log/ovirt-hosted-engine-setup/engine-logs-2018-09-05T08\:34\:55Z/ovirt-engine/host-deploy/ovirt-host-deploy-20180905103605-garlic.sanren.ac.za-543b536b.log | grep -i error
2018-09-05 10:35:46,909+0200 DEBUG otopi.context context.dumpEnvironment:869 ENV BASE/error=bool:'False'
2018-09-05 10:35:47,116 [ERROR] __main__.py:8011:MainThread @identity.py:145 - Reload of consumer identity cert /etc/pki/consumer/cert.pem raised an exception with msg: [Errno 2] No such file or directory: '/etc/pki/consumer/key.pem'
2018-09-05 10:35:47,383+0200 DEBUG otopi.context context.dumpEnvironment:869 ENV BASE/error=bool:'False'
2018-09-05 10:35:47,593 [ERROR] __main__.py:8011:MainThread @identity.py:145 - Reload of consumer identity cert /etc/pki/consumer/cert.pem raised an exception with msg: [Errno 2] No such file or directory: '/etc/pki/consumer/key.pem'
2018-09-05 10:35:48,245+0200 DEBUG otopi.context context.dumpEnvironment:869 ENV BASE/error=bool:'False'
Job for ovirt-imageio-daemon.service failed because the control process exited with error code. See "systemctl status ovirt-imageio-daemon.service" and "journalctl -xe" for details.
RuntimeError: Failed to start service 'ovirt-imageio-daemon'
2018-09-05 10:36:05,098+0200 ERROR otopi.context context._executeMethod:152 Failed to execute stage 'Closing up': Failed to start service 'ovirt-imageio-daemon'
2018-09-05 10:36:05,099+0200 DEBUG otopi.context context.dumpEnvironment:869 ENV BASE/error=bool:'True'
2018-09-05 10:36:05,099+0200 DEBUG otopi.context context.dumpEnvironment:869 ENV BASE/exceptionInfo=list:'[(<type 'exceptions.RuntimeError'>, RuntimeError("Failed to start service 'ovirt-imageio-daemon'",), <traceback object at 0x7f4de25ff320>)]'
2018-09-05 10:36:05,106+0200 DEBUG otopi.context context.dumpEnvironment:869 ENV BASE/error=bool:'True'
2018-09-05 10:36:05,106+0200 DEBUG otopi.context context.dumpEnvironment:869 ENV BASE/exceptionInfo=list:'[(<type 'exceptions.RuntimeError'>, RuntimeError("Failed to start service 'ovirt-imageio-daemon'",), <traceback object at 0x7f4de25ff320>)]'

I coudn't find anything helpful from the internet.

something relevant int he output of
  systemctl status ovirt-imageio-daemon.service
and
  journalctl -xe -u ovirt-imageio-daemon.service
?

 

On Tue, Sep 4, 2018 at 6:46 PM, Simone Tiraboschi <stirabos@redhat.com> wrote:


On Tue, Sep 4, 2018 at 6:07 PM Sakhi Hadebe <sakhi@sanren.ac.za> wrote:
Hi Sahina,

I am sorry I can't reproduce the error nor access the logs since I did a fresh installed pn nodes. However now I can't even react that far because the engine deployment fails to start the host up:


[ INFO ] TASK [Wait for the host to be up]
[ ERROR ] fatal: [localhost]: FAILED! => {"ansible_facts": {"ovirt_hosts": [{"address": "goku.sanren.ac.za", "affinity_labels": [], "auto_numa_status": "unknown", "certificate": {"organization": "sanren.ac.za", "subject": "O=sanren.ac.za,CN=goku.sanren.ac.za"}, "cluster": {"href": "/ovirt-engine/api/clusters/1ca368cc-b052-11e8-b7de-00163e008187", "id": "1ca368cc-b052-11e8-b7de-00163e008187"}, "comment": "", "cpu": {"speed": 0.0, "topology": {}}, "device_passthrough": {"enabled": false}, "devices": [], "external_network_provider_configurations": [], "external_status": "ok", "hardware_information": {"supported_rng_sources": []}, "hooks": [], "href": "/ovirt-engine/api/hosts/1c575995-70b1-43f7-b348-4a9788e070cd", "id": "1c575995-70b1-43f7-b348-4a9788e070cd", "katello_errata": [], "kdump_status": "unknown", "ksm": {"enabled": false}, "max_scheduling_memory": 0, "memory": 0, "name": "goku.sanren.ac.za", "network_attachments": [], "nics": [], "numa_nodes": [], "numa_supported": false, "os": {"custom_kernel_cmdline": ""}, "permissions": [], "port": 54321, "power_management": {"automatic_pm_enabled": true, "enabled": false, "kdump_detection": true, "pm_proxies": []}, "protocol": "stomp", "se_linux": {}, "spm": {"priority": 5, "status": "none"}, "ssh": {"fingerprint": "SHA256:B3/PDH551EFid93fm6PoRryi6/cXuVE8yNgiiiROh84", "port": 22}, "statistics": [], "status": "install_failed", "storage_connection_extensions": [], "summary": {"total": 0}, "tags": [], "transparent_huge_pages": {"enabled": false}, "type": "ovirt_node", "unmanaged_networks": [], "update_available": false}]}, "attempts": 120, "changed": false}


"status": "install_failed"

You have to check host-deploy logs to get a details error message.
 


Please help.

On Mon, Sep 3, 2018 at 1:34 PM, Sahina Bose <sabose@redhat.com> wrote:


On Wed, Aug 29, 2018 at 8:39 PM, Sakhi Hadebe <sakhi@sanren.ac.za> wrote:
Hi,

I am sorry to bother you again. 

I am trying to deploy an oVirt engine for oVirtNode-4.2.5.1. I get the same error I encountered before:

[ INFO  ] TASK [Add glusterfs storage domain]
[ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[Problem while trying to mount target]". HTTP response code is 400.
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Problem while trying to mount target]\". HTTP response code is 400."}
          Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs)[nfs]:

The glusterd daemon is running. 

mounting 172.16.4.18:/engine at /rhev/data-center/mnt/glusterSD/172.16.4.18:_engine (mount:204)
2018-08-29 16:47:28,846+0200 ERROR (jsonrpc/3) [storage.HSM] Could not connect to storageServer (hsm:2398)

Can you try to see if you are able to mount 172.16.4.18:/engine on the server you're deploying Hosted Engine using "mount -t glusterfs 172.16.4.18:/engine /mnt/test"


During the deployment of the engine it sets the engine entry in the /etc/hosts file with the IP Address of 192.168.124.* which it gets form the virbr0 bridge interface. I stopped the bridge and deleted it, but still giving the same error. Not sure what causes it to use that interface. Please help!

But I give the engine an IP of 192.168.1.10 same subnet as my gateway and my ovirtmgmt bridge. Attached is the ifconfig output of my Node, engine.log and vdsm.log.

Your assistance is always appreciated





On Wed, Jul 11, 2018 at 11:47 AM, Sahina Bose <sabose@redhat.com> wrote:
Is glusterd running on the server: goku.sanren.**
There's an error
Failed to get volume info: Command execution failed
error: Connection failed. Please check if gluster daemon is operational

Please check the volume status using "gluster volume status engine"

and if all looks ok, attach the mount logs from /var/log/glusterfs

On Wed, Jul 11, 2018 at 1:57 PM, Sakhi Hadebe <sakhi@sanren.ac.za> wrote:
Hi,

I have managed to fix the error by enabling the DMA Virtualisation in BIOS. I am now hit with a new error: It's failing to add a glusterfs storage domain:

[ INFO  ] TASK [Add glusterfs storage domain]
[ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[Problem while trying to mount target]". HTTP response code is 400.
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Problem while trying to mount target]\". HTTP response code is 400."}
          Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs)[nfs]:

Attached are vdsm and engine log files.





On Wed, Jul 11, 2018 at 9:57 AM, Sakhi Hadebe <sakhi@sanren.ac.za> wrote:


On Wed, Jul 11, 2018 at 9:33 AM, Sakhi Hadebe <sakhi@sanren.ac.za> wrote:
Hi,

Below are the versions of packages installed. Please find the logs attached.
Qemu:
ipxe-roms-qemu-20170123-1.git4e85b27.el7_4.1.noarch
libvirt-daemon-driver-qemu-3.9.0-14.el7_5.6.x86_64
qemu-img-ev-2.10.0-21.el7_5.4.1.x86_64
qemu-kvm-ev-2.10.0-21.el7_5.4.1.x86_64
qemu-kvm-common-ev-2.10.0-21.el7_5.4.1.x86_64

Libvirt installed packages:
libvirt-daemon-driver-storage-disk-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-config-nwfilter-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-storage-iscsi-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-network-3.9.0-14.el7_5.6.x86_64
libvirt-libs-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-secret-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-storage-core-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-storage-gluster-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-storage-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-qemu-3.9.0-14.el7_5.6.x86_64
libvirt-3.9.0-14.el7_5.6.x86_64
libvirt-python-3.9.0-1.el7.x86_64
libvirt-daemon-driver-nodedev-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-storage-rbd-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-storage-scsi-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-config-network-3.9.0-14.el7_5.6.x86_64
libvirt-client-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-kvm-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-storage-logical-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-interface-3.9.0-14.el7_5.6.x86_64
libvirt-lock-sanlock-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-storage-mpath-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-lxc-3.9.0-14.el7_5.6.x86_64
libvirt-daemon-driver-nwfilter-3.9.0-14.el7_5.6.x86_64

Virt-manager:
virt-manager-common-1.4.3-3.el7.noarch

oVirt:
[root@localhost network-scripts]# rpm -qa | grep ovirt
ovirt-setup-lib-1.1.4-1.el7.centos.noarch
cockpit-ovirt-dashboard-0.11.28-1.el7.noarch
ovirt-imageio-common-1.3.1.2-0.el7.centos.noarch
ovirt-vmconsole-host-1.0.5-4.el7.centos.noarch
ovirt-host-dependencies-4.2.3-1.el7.x86_64
ovirt-engine-sdk-python-3.6.9.1-1.el7.noarch
ovirt-imageio-daemon-1.3.1.2-0.el7.centos.noarch
ovirt-host-4.2.3-1.el7.x86_64
python-ovirt-engine-sdk4-4.2.7-2.el7.x86_64
ovirt-host-deploy-1.7.4-1.el7.noarch
cockpit-machines-ovirt-169-1.el7.noarch
ovirt-hosted-engine-ha-2.2.14-1.el7.noarch
ovirt-vmconsole-1.0.5-4.el7.centos.noarch
ovirt-provider-ovn-driver-1.2.11-1.el7.noarch
ovirt-engine-appliance-4.2-20180626.1.el7.noarch
ovirt-hosted-engine-setup-2.2.22.1-1.el7.noarch






On Wed, Jul 11, 2018 at 6:48 AM, Yedidyah Bar David <didi@redhat.com> wrote:
On Tue, Jul 10, 2018 at 11:32 PM, Sakhi Hadebe <sakhi@sanren.ac.za> wrote:
Hi,

I did not select any CPU architecture. It doenst gove me the option to select one. It only states the number of virtual CPUs and the memory for the engine VM.

Looking at the documentation of installing ovirt-release36.rpm....it does allow you to select te CPU, but not when installing ovirt-release42.rpm

On Tuesday, July 10, 2018, Alastair Neil <ajneil.tech@gmail.com> wrote:
what did you select as your CPU architecture when you created the cluster?  It looks like the VM is trying to use a CPU type of "Custom", how many nodes in your cluster?  I suggest you specify the lowest common denominator of CPU architecture (e.g. Sandybridge) of the nodes as the CPU architecture of the cluster..

On Tue, 10 Jul 2018 at 12:01, Sakhi Hadebe <sakhi@sanren.ac.za> wrote:
Hi,

I have just re-installed centOS 7 in 3 servers and have configured gluster volumes following this documentation: https://www.ovirt.org/blog/2016/03/up-and-running-with-ovirt-3-6/, But I have installed  
http://resources.ovirt.org/pub/yum-repo/ovirt-release42.rpm
package.
Hosted-engine --deploy is failing with this error:

 "rhel7", "--virt-type", "kvm", "--memory", "16384", "--vcpus", "4", "--network", "network=default,mac=00:16:3e:09:5e:5d,model=virtio", "--disk", "/var/tmp/localvm0nnJH9/images/eacac30d-0304-4c77-8753-6965e4b8c2e7/d494577e-027a-4209-895b-6132e6fc6b9a", "--import", "--disk", "path=/var/tmp/localvm0nnJH9/seed.iso,device=cdrom", "--noautoconsole", "--rng", "/dev/random", "--graphics", "vnc", "--video", "vga", "--sound", "none", "--controller", "usb,model=none", "--memballoon", "none", "--boot", "hd,menu=off", "--clock", "kvmclock_present=yes"], "delta": "0:00:00.979003", "end": "2018-07-10 17:55:11.308555", "msg": "non-zero return code", "rc": 1, "start": "2018-07-10 17:55:10.329552", "stderr": "ERROR    unsupported configuration: CPU mode 'custom' for x86_64 kvm domain on x86_64 host is not supported by hypervisor\nDomain installation does not appear to have been successful.\nIf it was, you can restart your domain by running:\n  virsh --connect qemu:///system start HostedEngineLocal\notherwise, please restart your installation.", "stderr_lines": ["ERROR    unsupported configuration: CPU mode 'custom' for x86_64 kvm domain on x86_64 host is not supported by hypervisor", "Domain installation does not appear to have been successful.", "If it was, you can restart your domain by running:", "  virsh --connect qemu:///system start HostedEngineLocal", "otherwise, please restart your installation."], "stdout": "\nStarting install...", "stdout_lines": ["", "Starting install..."]}

This seems to be in the phase where we create a local vm for the engine. We do this with plain virt-install, nothing fancy. Searching the net for "unsupported configuration: CPU mode 'custom'" finds other relevant reports, you might want to check them. You can see the command in bootstrap_local_vm.yml .

Please check/share versions of relevant packages (libvirt*, qemu*, etc) and relevant logs (libvirt).

Also updating the subject line and adding Simone.

Best regards,
--
Didi



--
Regards,
Sakhi Hadebe
Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR
 
Tel:   +27 12 841 2308
Fax:   +27 12 841 4223
Cell:  +27 71 331 9622
Email: sakhi@sanren.ac.za



--
Regards,
Sakhi Hadebe
Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR
 
Tel:   +27 12 841 2308
Fax:   +27 12 841 4223
Cell:  +27 71 331 9622
Email: sakhi@sanren.ac.za



--
Regards,
Sakhi Hadebe
Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR
 
Tel:   +27 12 841 2308
Fax:   +27 12 841 4223
Cell:  +27 71 331 9622
Email: sakhi@sanren.ac.za

_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-leave@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
 List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YHKUKW22QLRVS56XZBXEWOGORFWFEGIA/





--
Regards,
Sakhi Hadebe
Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR
 
Tel:   +27 12 841 2308
Fax:   +27 12 841 4223
Cell:  +27 71 331 9622
Email: sakhi@sanren.ac.za




--
Regards,
Sakhi Hadebe
Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR
 
Tel:   +27 12 841 2308
Fax:   +27 12 841 4223
Cell:  +27 71 331 9622
Email: sakhi@sanren.ac.za
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-leave@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/DS7O33ZSGV5ZAHXKA3KT2ABYW3VJJWXQ/



--
Regards,
Sakhi Hadebe
Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR
 
Tel:   +27 12 841 2308
Fax:   +27 12 841 4223
Cell:  +27 71 331 9622
Email: sakhi@sanren.ac.za



--
Regards,
Sakhi Hadebe
Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR
 
Tel:   +27 12 841 2308
Fax:   +27 12 841 4223
Cell:  +27 71 331 9622
Email: sakhi@sanren.ac.za



--
Regards,
Sakhi Hadebe
Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR
 
Tel:   +27 12 841 2308
Fax:   +27 12 841 4223
Cell:  +27 71 331 9622
Email: sakhi@sanren.ac.za