On 04/17/2014 04:08 AM, Matt . wrote:you are not supposed to need the promiscious hook for sniffing/mirroring - that's by now part of engine/vdsm (at vnic level in earlier versions, and at network profile in later versions iirc)
Hi Guys,
I'm not able to write a howto yet as we need to check how this is
running on high traffic and we are going soon. Than, we need to test
some other functions before I can actually write something down.
Because this is not all documented well indeed I'm in testmode and doing
some @ life system as reallife environments are always coming with other
things than your prefec test.
I cannot say I needed promiscuouity, I did some things you would
normally do on pfsense which fixed that part. Some old message you
really need to discard instead of clicking it away was confusing this test.
<mailto:danken@redhat.com>>:<mailto:yamakasi.014@gmail.com>>:
On Thu, Apr 17, 2014 at 01:11:13AM +0200, Matt . wrote:
> OK, also this is finetuned, but it would be nice to have some
more info
> about the hooks in these cases... it's interesting as oVirt has
the right
> settings to start with but we need to know what we need to set
when we have
> a setup like this for an example.
Could you explain what you have done, and what do you need promiscuouity
for? oVirt has "port mirroring" that allows to mirror ip traffic from
one vm network to another.
>
>
> 2014-04-17 0:35 GMT+02:00 Matt . <yamakasi.014@gmail.com
>
> > Traffic issues are solved, but the advertising in not that well.
> >
> > I see on ESXi (vSphere) that you need to enable "Promiscuous
Mode", but
> > how on oVirt ?
> >
> >
http://www.blissfulidiot.com/2013/11/using-carp-with-vmware-esxi.html
> >
> > Do I need the vdsm-hook-promisc for it ? as I need to make real
settings
> > on a VM there I think the vswitch only needs the mode.
> >
> > Information is welcome!
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users