Hi Yanir,
We had our oVirt Engine running on a HW server so we decided to move it to hosted-engine. For this I've followed the Howto at http://www.ovirt.org/
documentation/self-hosted/ .chap-Migrating_from_Bare_ Metal_to_an_EL-Based_Self- Hosted_Environment/ The Hosted-Storage is located on a FC SAN LUN.
Please find attached the setup log.
Tanks a lot.
Regards,
Arsène
On 06/21/2017 10:14 AM, Yanir Quinn wrote:
ThanksHI Arsene
Just to be clear, can you write down the steps to reproduce ? (the migration procedure . and if possible the state before and after)
On Mon, Jun 19, 2017 at 8:34 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi Jenny,
Thanks for the explanations..
Please find vm.conf attached, it looks like the ovirtmgmt network is defined
Regards,
Arsène
On 06/19/2017 01:46 PM, Evgenia Tokar wrote:
Hi,
It should be in one of the directories on your storage domain:
..../cd1f6775-61e9-4d04-b41c-c64925d5a905/images/<imageId>/< volumeId>
To see which one you can run the following command:
vdsm-client Volume getInfo volumeID=<volumeId> imageID=<imageId> storagedomainID=<storageDomainId> storagepoolID=<storagePoolId>
the storage domain id is: cd1f6775-61e9-4d04-b41c-c64925d5a905
the storage pool id can be found using: vdsm-client StorageDomain getInfo storagedomainID=cd1f6775-61e9-4d04-b41c-c64925d5a905
The volume that has "description": "HostedEngineConfigurationImage" is the one you are looking for.
Untar it and it should contain the original vm.conf which was used to start the hosted engine.
Jenny Tokar
On Mon, Jun 19, 2017 at 12:59 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi Jenny,
1. I couldn't locate any tar file containing vm.conf, do you know the exact place where it is stored?
2. The ovirtmgmt appears in the network dropdown but I'm not able to change since it complains about locked values.
Thanks a lot for your help.
Regards,
Arsène
On 06/14/2017 01:26 PM, Evgenia Tokar wrote:
2. It's uncelar from the screenshot, in the network dropdown do you have an option to add a ovirtmgmt network?Hi Arseny,
Looking at the log the ovf doesn't contain the ovirtmgmt network.
1. Can you provide the original vm.conf file the engine was started with? It is located in a tar archive on your storage domain.
Thanks,
Jenny
On Tue, Jun 13, 2017 at 11:19 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Sorry for that, I haven't checked.
I've replaced the log file with a new version which should work i hope.
Many Thanks.
Regards,
Arsène
On 06/12/2017 02:33 PM, Martin Sivak wrote:
I am sorry to say so, but it seems the log archive is corrupted. I can't open it. Regards Martin Sivak On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:Please find the logs here: https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ1 Thanks. Regards, Arsène Hi, Sorry for this, it seems that the attachment have been detached. So let's try again Regards, Arsène On 06/12/2017 11:59 AM, Martin Sivak wrote: Hi, I would love to help you, but I didn't get the log file.. Regards Martin Sivak On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote: Hi all, Any chance to get help or a hint to solve my Problem, I have no idea how to change this configuration since it is not possible using the WebUI. Thanks a lot. Regards, Arsène On 06/07/2017 11:50 AM, Arsène Gschwind wrote: Hi all, Please find attached the agent.log DEBUG and a screenshot from webui Thanks a lot Best regards, Arsène On 06/07/2017 11:27 AM, Martin Sivak wrote: Hi all, Yanir is right, the local vm.conf is just a cache of what was retrieved from the engine. I might be interesting to check what the configuration of the engine VM shows when edited using the webadmin. Or enable debug logging [1] for hosted engine and add the OVF dump we send there now and then (the xml representation of the VM). [1] See /etc/ovirt-hosted-engine-ha/ag5NIeAtCa?dl=0 ent-log.conf and change the level for root logger to DEBUG Best regards Martin Sivak On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <yquinn@redhat.com> wrote: If im not mistaken the values of vm.conf are repopulated from the database , but i wouldn't recommend meddling with DB data. maybe the network device wasn't set properly during the hosted engine setup ? On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote: Hi, Any chance to get a hint how to change the vm.conf file so it will not be overwritten constantly? Thanks a lot. Arsène On 06/06/2017 09:50 AM, Arsène Gschwind wrote: Hi, I've migrated our oVirt engine to hosted-engine located on a FC storage LUN, so far so good. For some reason I'm not able to start the hosted-engine VM, after digging in the log files i could figured out the reason. The Network device was set to "None" as follow: devices={nicModel:pv,macAddr:0 0:16:3e:3a:6b:60,linkActive:tr ue,network:None,deviceId:56cb4 d71-13ff-42a8-bb83-7faef99fd3e a,address:{slot:0x03,bus:0x00, domain:0x0000,type:pci,functio n:0x0},device:bridge,type:inte rface} I've created a new config file /var/run/ovirt-hosted-engine-h a/vm.conf.new and set the nic device to ovirtmgnt, the I could start the hosted-engine using : hosted-engine --vm-start --vm-conf=var/run/ovirt-hosted -engine-ha/vm.conf.new The nic device line in vm.conf.new looks like: devices={nicModel:pv,macAddr:0 0:16:3e:3a:6b:60,linkActive:tr ue,network:ovirtmgmt,deviceId: 56cb4d71-13ff-42a8-bb83-7faef9 9fd3ea,address:{slot:0x03,bus: 0x00,domain:0x0000,type:pci,fu nction:0x0},device:bridge,type :interface} I tried to find out a way to change this setting on vm.conf but it is constantly rewritten, even when using the webui is say's: HostedEngine: There was an attempt to change Hosted Engine VM values that are locked. Is there a way to modify/correct the hosted-engine vm.conf file so it will stay and not be overwritten? Thanks a lot for any hint/help rgds, arsène -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 ______________________________ _________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman /listinfo/users -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman /listinfo/users _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman /listinfo/users -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman /listinfo/users -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman /listinfo/users -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
--
Arsène Gschwind
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
--
Arsène Gschwind
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11