On Sun, Jan 3, 2016 at 2:46 AM, Will Dennis <wdennis@nec-labs.com> wrote:

I have had one of my hosts go into the state “Non Operational” after I rebooted it… I also noticed that in the oVirt webadmin UI, the NIC that’s used in the ‘ovirtmgmt’ network is showing “down”, but in Linux the NIC is operational and up, as is the ‘ovirtmgmt’ bridge…

Hosts tab -> Network Interfaces subtab -> click "Setup networks" and make sure "ovirtmgmt" is placed on a working nic.

make sure

[root@ovirt-node-02 ~]# ip link sh up
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: bond0: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT
link/ether 00:15:17:7b:e9:b0 brd ff:ff:ff:ff:ff:ff
3: enp4s0f0: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 1500 qdisc pfifo_fast master bond0 state DOWN mode DEFAULT qlen 1000
link/ether 00:15:17:7b:e9:b0 brd ff:ff:ff:ff:ff:ff
4: enp4s0f1: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 1500 qdisc pfifo_fast master bond0 state DOWN mode DEFAULT qlen 1000
link/ether 00:15:17:7b:e9:b0 brd ff:ff:ff:ff:ff:ff
5: enp12s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master ovirtmgmt state UP mode DEFAULT qlen 1000
link/ether 00:21:85:35:08:4c brd ff:ff:ff:ff:ff:ff
7: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT
link/ether 00:21:85:35:08:4c brd ff:ff:ff:ff:ff:ff

What should I take a look at first?

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users