On Thu, Feb 15, 2018 at 5:20 PM, Thomas Davis <tadavis@lbl.gov> wrote:In playing with this, I found that 4.2.1 hosted-engine will not install on a node with the ovirtmgmt interface being a vlan.Can you please attach vdsm and host-deploy logs?Is this a still supported config? I see that access port, bonded and vlan tagged are supported by older versions..Yes, absolutely: if not VLAN doens't work it's definitively an issue.Adding Ido here.
thomas
On 02/05/2018 08:16 AM, Simone Tiraboschi wrote:
<http://192.168.122.0/24> subnet
On Fri, Feb 2, 2018 at 9:10 PM, Thomas Davis <tadavis@lbl.gov <mailto:tadavis@lbl.gov>> wrote:
Is this supported?
I have a node, that centos 7.4 minimal is installed on, with an
interface setup for an IP address.
I've yum installed nothing else except the ovirt-4.2.1-pre rpm, run
screen, and then do the 'hosted-engine --deploy' command.
Fine, nothing else is required.
It hangs on:
[ INFO ] changed: [localhost]
[ INFO ] TASK [Get ovirtmgmt route table id]
[ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed":
true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\
//g | awk '{ print $9 }'", "delta": "0:00:00.004845", "end":
"2018-02-02 12:03:30.794860", "rc": 0, "start": "2018-02-02
12:03:30.790015", "stderr": "", "stderr_lines": [], "stdout": "",
"stdout_lines": []}
[ ERROR ] Failed to execute stage 'Closing up': Failed executing
ansible-playbook
[ INFO ] Stage: Clean up
[ INFO ] Cleaning temporary resources
[ INFO ] TASK [Gathering Facts]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Remove local vm dir]
[ INFO ] ok: [localhost]
[ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20180202 120333.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Hosted Engine deployment failed: please check the logs for
the issue, fix accordingly or re-deploy from scratch.
Log file is located at
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup -20180202115038-r11nh1.log
but the VM is up and running, just attached to the 192.168.122.0/24
[root@d8-r13-c2-n1 ~]# ssh root@192.168.122.37
<mailto:root@192.168.122.37>
root@192.168.122.37 <mailto:root@192.168.122.37>'s password:
Last login: Fri Feb 2 11:54:47 2018 from 192.168.122.1
[root@ovirt ~]# systemctl status ovirt-engine
● ovirt-engine.service - oVirt Engine
Loaded: loaded (/usr/lib/systemd/system/ovirt-engine.service; Feb 02 11:54:41 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
enabled; vendor preset: disabled)
Active: active (running) since Fri 2018-02-02 11:54:42 PST;
11min ago
Main PID: 24724 (ovirt-engine.py)
CGroup: /system.slice/ovirt-engine.service
├─24724 /usr/bin/python
/usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.p y
--redirect-output --systemd=notify start
└─24856 ovirt-engine -server -XX:+TieredCompilation
-Xms3971M -Xmx3971M -Djava.awt.headless=true
-Dsun.rmi.dgc.client.gcInterval=3600000
-Dsun.rmi.dgc.server.gcInterval=3600000 -Djsse...
systemd[1]: Starting oVirt Engine...
Feb 02 11:54:41 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
ovirt-engine.py[24724]: 2018-02-02 11:54:41,767-0800 ovirt-engine:
INFO _detectJBossVersion:187 Detecting JBoss version. Running:
/usr/lib/jvm/jre/...600000', '-
Feb 02 11:54:42 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
ovirt-engine.py[24724]: 2018-02-02 11:54:42,394-0800 ovirt-engine:
INFO _detectJBossVersion:207 Return code: 0, | stdout: '[u'WildFly
Full 11.0.0....tderr: '[]'
Feb 02 11:54:42 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
systemd[1]: Started oVirt Engine.
Feb 02 11:55:25 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
python2[25640]: ansible-stat Invoked with checksum_algorithm=sha1
get_checksum=True follow=False
path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes= Feb 02 11:55:29 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>True
python2[25698]: ansible-stat Invoked with checksum_algorithm=sha1
get_checksum=True follow=False
path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes= Feb 02 11:55:30 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>True
python2[25741]: ansible-stat Invoked with checksum_algorithm=sha1
get_checksum=True follow=False
path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes= Feb 02 11:55:30 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>True
python2[25767]: ansible-stat Invoked with checksum_algorithm=sha1
get_checksum=True follow=False
path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes= Feb 02 11:55:31 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>True Users@ovirt.org <mailto:Users@ovirt.org>
python2[25795]: ansible-stat Invoked with checksum_algorithm=sha1
get_checksum=True follow=False
path=/etc/ovirt-engine-metrics/config.yml get_md5...ributes=True
The 'ip rule list' never has an ovirtmgmt rule/table in it.. which
means the ansible script loops then dies; vdsmd has never configured
the network on the node.
Right.
Can you please attach engine.log and host-deploy from the engine VM?
[root@d8-r13-c2-n1 ~]# systemctl status vdsmd -l
● vdsmd.service - Virtual Desktop Server Manager
Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled;
vendor preset: enabled)
Active: active (running) since Fri 2018-02-02 11:55:11 PST;
14min ago
Main PID: 7654 (vdsmd)
CGroup: /system.slice/vdsmd.service
└─7654 /usr/bin/python2 /usr/share/vdsm/vdsmd
Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm:
Running dummybr
Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm:
Running tune_system
Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm:
Running test_space
Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm:
Running test_lo
Feb 02 11:55:11 d8-r13-c2-n1 systemd[1]: Started Virtual Desktop
Server Manager.
Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN File:
/var/run/vdsm/trackedInterfaces/vnet0 already removed
Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN Not ready yet,
ignoring event
'|virt|VM_status|ba56a114-efb0-45e0-b2ad-808805ae93e0'
args={'ba56a114-efb0-45e0-b2ad-808805ae93e0': {'status': 'Powering
up', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '127.0.0.1',
'type': 'vnc', 'port': '5900'}], 'hash': '5328187475809024041',
'cpuUser': '0.00', 'monitorResponse': '0', 'elapsedTime': '0',
'cpuSys': '0.00', 'vcpuPeriod': 100000L, 'timeOffset': '0',
'clientIp': '', 'pauseCode': 'NOERR', 'vcpuQuota': '-1'}}
Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available.
Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available, KSM
stats will be missing.
Feb 02 11:55:17 d8-r13-c2-n1 vdsm[7654]: WARN ping was deprecated in
favor of ping2 and confirmConnectivity
Do I need to install a complete ovirt-engine on the node first,
bring the node into ovirt, then bring up hosted-engine? I'd like to
avoid this and just go straight to hosted-engine setup.
thomas
_______________________________________________
Users mailing list
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users >