On Wed, Nov 22, 2017 at 1:26 AM, Edward Clay <edward.clay@uk2group.com> wrote:
On Tue, 2017-11-21 at 16:01 -0700, Edward Clay wrote:
On Wed, 2017-11-22 at 00:17 +0200, Edward Haas wrote:


On Tue, Nov 21, 2017 at 6:16 PM, Edward Clay <edward.clay@uk2group.com> wrote:

On Tue, 2017-11-21 at 09:00 +0200, Edward Haas wrote:


On Tue, Nov 21, 2017 at 1:24 AM, Edward Clay <edward.clay@uk2group.com> wrote:
Hello,

We have an issue where hosts are configured with the public facing nework interface as the ovirtmgmt network and it's default route is added to a ovirt created table but not to the main routing table. From my searching I've found this snippet from https://www.ovirt.org/develop/release-management/features/network/multiple-gateways/ which seems to explain why I can't ping anything or communicate with any other system needing a default route.


By default, the default route is set on the ovirtmgmt network (the default one, defined on the interface/ip which you added the host to Engine).
Do you have a different network set up which you will like to set the default route on?
 

"And finally, here's the host's main routing table. Any traffic coming in to the host will use the ip rules and an interface's routing table. The main routing table is only used for traffic originating from the host."

I'm seeing the following main and custom ovirt created tables.

main:
# ip route show table main
10.0.0.0/8 via 10.4.16.1 dev enp3s0.106 
10.4.16.0/24 dev enp3s0.106 proto kernel scope link src 10.4.16.15 
1.1.1.0/24 dev PUBLICB proto kernel scope link src 1.1.1.1 169.254.0.0/16 dev enp6s0 scope link metric 1002 
169.254.0.0/16 dev enp3s0 scope link metric 1003 
169.254.0.0/16 dev enp7s0 scope link metric 1004 
169.254.0.0/16 dev enp3s0.106 scope link metric 1020 
169.254.0.0/16 dev PRIVATE scope link metric 1022 
169.254.0.0/16 dev PUBLIC scope link metric 1024 

table 1138027711
# ip route show table 1138027711
default via 1.1.1.1 dev PUBLIC
1.1.1.0/24 via 1.1.1.1 dev PUBLIC

If I manually execute the following command to add the default route as well to the main table I can ping ouside of the local network.

ip route add 0.0.0.0/0 via 1.1.1.1 dev PUBLIC

If I attempt to modify the /etc/sysconfig/network-scripts/route-PUBLIC ad reboot the server ad one would think this file is recreated by vdsm on boot.

What I'm looking for is the correct way to setup a default gateway for the main routing table so the hosts can get OS updates and communicate with the outside world.


Providing the output from "ip addr" may help clear up some things.
It looks like you have on the host the default route set as 10.4.16.1 (on enp3s0.106), could you elaborate what this interface is?

We have setup vlan taging to utilize the 2 internetal network interfaces (originally enp6s0 and enp7s0) to be configured with mulitiple networks each. We eventually added 10Gb nics to all servers to improve san glusterfs performance which is enp3s0 which replaced enp6s0 in our setup.

enp3s0.106 = ovirtmgmt network access to private internal networks only
enp3s0.206 = private network bridge PRIVATE used for private internal network access for VMs
enp7s0.606 = is used for public access for both VMs (bridge) and each host/cp/san in our ovirt setup named PUBLIC

# ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:25:90:38:d6:2c brd ff:ff:ff:ff:ff:ff
    inet6 fe80::225:90ff:fe38:d62c/64 scope link 
       valid_lft forever preferred_lft forever
3: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether 90:e2:ba:1d:a4:00 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::92e2:baff:fe1d:a400/64 scope link 
       valid_lft forever preferred_lft forever
4: enp7s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:25:90:38:d6:2d brd ff:ff:ff:ff:ff:ff
20: enp3s0.106@enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
    link/ether 90:e2:ba:1d:a4:00 brd ff:ff:ff:ff:ff:ff
    inet 10.4.16.15/24 brd 10.4.16.255 scope global enp3s0.106
       valid_lft forever preferred_lft forever
21: enp3s0.206@enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master PRIVATEB state UP qlen 1000
    link/ether 90:e2:ba:1d:a4:00 brd ff:ff:ff:ff:ff:ff
22: PRIVATE: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
    link/ether 90:e2:ba:1d:a4:00 brd ff:ff:ff:ff:ff:ff
23: enp7s0.606@enp7s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master PUBLICB state UP qlen 1000
    link/ether 00:25:90:38:d6:2d brd ff:ff:ff:ff:ff:ff
24: PUBLIC: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
    link/ether 00:25:90:38:d6:2d brd ff:ff:ff:ff:ff:ff
    inet 1.1.1.10/24 brd 1.1.1.255 scope global PUBLICB
       valid_lft forever preferred_lft forever
25: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 0e:32:93:dd:a4:55 brd ff:ff:ff:ff:ff:ff


So all this being said I just need to reconfigure things in a way that the PUBLIC interface has a default route in the main routing table. Otherwise all ovirt host are unable to communicate with the outside world until I manually add a default route to 1.1.1.1 via the PUBLIC interface. Is that possible.


It is available in oVirt 4.2 as a network cluster role.
On 4.1, it is available as a network custom property and its support is limited: See https://bugzilla.redhat.com/show_bug.cgi?id=1200963#c43 and https://gerrit.ovirt.org/#/c/66127
Make sure you do not define two networks with the flag on.


Thanks for the prompt reply. I've taken a look at the link you provided for 4.1 and I'm not sure how or where I'm supposed to set thid custom property for the interface. Is the patch mentioned in the link you provide already included in 4.1 or do I need to do something additional to make this work.

I've attempted to edit an existing host network by clicking "setup host network" but the page times out with a "page unresponsive" I can either exit or wait. Waiting doesn't seem to produce good results. Is this where I would adde/edit this custom property?

Looks like I should of read a bit harder before replying. I found the following two commands on the ovirt change 66127 page.

Note that prior to using a custom property, one has to define it on Engine by: sudo engine-config -g CustomDeviceProperties sudo engine-config -s CustomDeviceProperties='{type=interface;prop={default_reoute=^(true|false)$}}' --cver=4.0 and restart of ovirt-engine.

Note the misspell: It should be "default_route"


I've done the above and I can edit the vNIC profile on all networks that have them. The ovirtmgmt network does not have a vNIC profile to edit. Is this theh correct location to make this change?  

In the commit message, it mentions "management network attachement" and not the vNic profile.
It should appear at the same place you set the IP address for the network on the host.


How do I make if false for the ovirtmgmt network. The option to add a new vNIC profile to it isn't available.


Also once this value is set what do I do next?

 

Thanks,
Edy.


_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


--