----- Original Message -----
> From: "Alon Bar-Lev" <alonbl@redhat.com>
> To: "Limor Gavish" <lgavish@gmail.com>
> Cc: "Yuval M" <yuvalme@gmail.com>, users@ovirt.org, "Nezer Zaidenberg" <nzaidenberg@mac.com>, "Vered Volansky"
> <vered@redhat.com>
Fix submitted to upstream[1]> Sent: Monday, April 29, 2013 1:25:21 PM
> Subject: Re: [Users] Unable to add host in a development setup - "Host kernelpanic.home installation failed. Failed
> to decode own public key from store 'keys/engine.p12' using alias '1'."
>
>
>
> ----- Original Message -----
> > From: "Limor Gavish" <lgavish@gmail.com>
> > To: "Alon Bar-Lev" <alonbl@redhat.com>
> > Cc: "Yuval M" <yuvalme@gmail.com>, users@ovirt.org, "Nezer Zaidenberg"
> > <nzaidenberg@mac.com>, "Vered Volansky"
> > <vered@redhat.com>
> > Sent: Monday, April 29, 2013 12:52:15 PM
> > Subject: Re: [Users] Unable to add host in a development setup - "Host
> > kernelpanic.home installation failed. Failed
> > to decode own public key from store 'keys/engine.p12' using alias '1'."
> >
> > I eliminated the error: [ ERROR ] Failed to execute stage 'Misc
> > configuration': Command '/home/wil/ovirt-engine/share/
> > ovirt-engine/bin/engine-encrypt-passwd.sh
> > by installing jboss
> > sudo yum install jboss-as
>
> But you already had jboss... I would like to know why it failed.
> Have you specified wrong jboss home? Was jboss invalid?
> Do you have the log? I would like to solve the issue if exists.
>
> >
> > And now the "ovirt-engine.py start" doesn't return immediately
> >
> > However, connecting to http://127.0.0.1:8700/ still doesn't work.
>
> You should connect to port 8080 as written in the summary of installation and
> documentation. Why do you try 8700?
>
> >
> > It seems that nobody is listening to port 8700:
> >
> > [wil@bufferoverflow ~]$ netstat -anp | grep 8700
> > (Not all processes could be identified, non-owned process info
> > will not be shown, you would have to be root to see it all.)
> > [wil@bufferoverflow ~]$
> > [wil@bufferoverflow ~]$ sudo netstat -anp | grep 8700
> > [wil@bufferoverflow ~]$
> >
> >
> > Full logs are attached
>
> Thank you so much!
> Indeed there is a bug!!!
> I succeeded in reproducing it.
> I had another installation in my computer which caused it to succeed.
> This was a stupid mistake.
[1] http://gerrit.ovirt.org/#/c/14314/
> I am sorry it took me so long to find it out.
> All you need is to fetch new HEAD and install, no need to rebuild (use the
> DEV_REBUILD=0)
>
> Thank you again,
> Alon.
>
> >
> > Here is the output of the "engine-setup-2" script:
> > [wil@bufferoverflow otopi]$ $HOME/ovirt-engine/bin/engine-setup-2
> > [ INFO ] Stage: Initializing
> > Setup was run under unprivileged user this will produce
> > development installation do you wish to proceed? (Yes, No) [No]: Yes
> > [ INFO ] Stage: Environment setup
> > Log file: /tmp/ovirt-engine-setup-20130429123931.log
> > Version: otopi-1.0.1
> > Configuration files: []
> > [ INFO ] Stage: Installation packages setup
> > [ INFO ] Stage: Programs detection
> > [ INFO ] Stage: Environment customization
> >
> > --== NETWORK CONFIGURATION ==--
> >
> > Host fully qualified DNS name of this server
> > [bufferoverflow.home]:
> >
> > --== DATABASE CONFIGURATION ==--
> >
> >
> > ATTENTION
> >
> > Manual action required.
> > Please create database for ovirt-engine use. Use the following
> > commands as an example:
> >
> > create user engine password 'engine';
> > create database engine owner engine;
> >
> > Make sure that datbase can be accessed remotely.
> >
> > Database host [localhost]:
> > Database port [5432]:
> > Database secured connection (Yes, No) [No]:
> > Database name [engine]:
> > Database user [engine]:
> > Database password:
> >
> > --== OVIRT ENGINE CONFIGURATION ==--
> >
> >
> > --== PKI CONFIGURATION ==--
> >
> > PKI is already configured
> > Skipping storing options as database already prepared
> >
> > --== APACHE CONFIGURATION ==--
> >
> >
> > --== SYSTEM CONFIGURATION ==--
> >
> >
> > --== END OF CONFIGURATION ==--
> >
> > [ INFO ] Stage: Setup validation
> > [WARNING] There is less than 16384MB available memory
> >
> > --== CONFIGURATION PREVIEW ==--
> >
> > Database name : engine
> > Database secured connection : False
> > Database host : localhost
> > Database user name : engine
> > Database host name validation : False
> > Datbase port : 5432
> > Host fqdn : bufferoverflow.home
> >
> > Please confirm installation settings (OK, Cancel) [OK]:
> > [ INFO ] Stage: Transaction setup
> > [ INFO ] Stage: Package installation
> > [ INFO ] Stage: Misc configuration
> > [ INFO ] Backing up database to
> > '/home/wil/ovirt-engine/var/lib/ovirt-engine/backups/engine-20130429123952.sfnksc.sql'.
> > [ INFO ] Updating database schema
> > [ INFO ] Stage: Transaction commit
> > [ INFO ] Stage: Closing up
> >
> > --== SUMMARY ==--
> >
> >
> > --== END OF SUMMARY ==--
> >
> > Web access is enabled at:
> > http://bufferoverflow.home:8080/ovirt-engine
> > https://bufferoverflow.home:8443/ovirt-engine
> > JBoss is listending for debug connection at: 127.0.0.1:8787
> > The following network ports should be opened:
> > tcp:8080
> > tcp:8443
> > An example of the required configuration for iptables can be
> > found at:
> > /home/wil/ovirt-engine/etc/ovirt-engine/iptables.example
> > In order to configure firewalld, copy the files from
> > /home/wil/ovirt-engine/etc/ovirt-engine/firewalld to
> > /etc/firewalld/services
> > and execute the following commands:
> > firewall-cmd --add-service ovirt-https
> > firewall-cmd --add-service ovirt-http
> > SSH fingerprint: 51:4d:10:ee:e0:46:3b:7f:f6:e7:05:62:48:60:23:e2
> > Internal CA SHA1
> > Fingerprint=17:C4:3B:72:CC:EF:50:DE:55:5B:11:04:EB:4A:70:E1:51:33:7D:41
> > [ INFO ] Stage: Clean up
> > Log file is located at /tmp/ovirt-engine-setup-20130429123931.log
> > [ INFO ] Stage: Pre-termination
> > [ INFO ] Stage: Termination
> >
> >
> >
> > On Mon, Apr 29, 2013 at 12:43 PM, Alon Bar-Lev <alonbl@redhat.com> wrote:
> >
> > >
> > >
> > > ----- Original Message -----
> > > > From: "Limor Gavish" <lgavish@gmail.com>
> > > > To: "Alon Bar-Lev" <alonbl@redhat.com>
> > > > Cc: "Yuval M" <yuvalme@gmail.com>, users@ovirt.org, "Nezer Zaidenberg"
> > > > <
> > > nzaidenberg@mac.com>, "Vered Volansky"
> > > > <vered@redhat.com>
> > > > Sent: Monday, April 29, 2013 12:35:45 PM
> > > > Subject: Re: [Users] Unable to add host in a development setup - "Host
> > > kernelpanic.home installation failed. Failed
> > > > to decode own public key from store 'keys/engine.p12' using alias '1'."
> > > >
> > > > Attached the contents of:
> > > > /home/wil/ovirt-engine/share/ovirt-engine/conf/engine.conf.defaults
> > > > /home/wil/ovirt-engine/share/ovirt-engine/services/config.py
> > > >
> > > /home/wil/ovirt-engine/share/ovirt-engine/setup/ovirt_engine_setup/config.py
> > >
> > > Files are good.
> > >
> > > >
> > > > Concerning this file:
> > > > [wil@bufferoverflow ~]$ cat
> > > > /home/wil/ovirt-engine/share/ovirt-engine/setup/config.py
> > > > cat: /home/wil/ovirt-engine/share/ovirt-engine/setup/config.py: No such
> > > > file or directory
> > >
> > > My bad... it is
> > > /home/wil/ovirt-engine/share/ovirt-engine/setup/ovirt_engine_setup/config.py
> > > But no reason it will be incorrect as others are correct.
> > >
> > > >
> > > > After that I started fresh:
> > > > rm -fr ~/ovirt-engine
> > > > git clone https://github.com/alonbl/ovirt-engine.git otopi
> > > > cd otopi/
> > > > git fetch https://github.com/alonbl/ovirt-engine.git otopi
> > > > git checkout -b otopi FETCH_HEAD
> > > > make install-dev PREFIX=$HOME/ovirt-engine DEV_REBUILD=0
> > > > $HOME/ovirt-engine/bin/engine-setup-2
> > > > $HOME/ovirt-engine/share/ovirt-engine/services/ovirt-engine.py start
> > > >
> > > > However, the output of "engine-setup-2" contains the following error:
> > > > [ ERROR ] Failed to execute stage 'Misc configuration': Command
> > > > '/home/wil/ovirt-engine/share/ovirt-engine/bin/engine-encrypt-passwd.sh'
> > > > failed to execute
> > > > (I don't want to work with any encryption)
> > >
> > > This is encryption of database user's password within configuration.
> > >
> > > >
> > > > and the "ovirt-engine.py start" returns immediately and logs were not
> > > > created in
> > > > $HOME/ovirt-engine/var/log/ovirt-engine/
> > >
> > > Yes, you probably cannot start engine if installation fails. Can you
> > > please attach the installation log? Its name should appear at the
> > > summary.
> > >
> > > Thank you!
> > >
> > > >
> > > >
> > > > On Mon, Apr 29, 2013 at 12:03 PM, Alon Bar-Lev <alonbl@redhat.com>
> > > wrote:
> > > >
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > > From: "Limor Gavish" <lgavish@gmail.com>
> > > > > > To: "Alon Bar-Lev" <alonbl@redhat.com>
> > > > > > Cc: "Yuval M" <yuvalme@gmail.com>, users@ovirt.org, "Nezer
> > > Zaidenberg" <
> > > > > nzaidenberg@mac.com>, "Vered Volansky"
> > > > > > <vered@redhat.com>
> > > > > > Sent: Monday, April 29, 2013 11:54:05 AM
> > > > > > Subject: Re: [Users] Unable to add host in a development setup -
> > > "Host
> > > > > kernelpanic.home installation failed. Failed
> > > > > > to decode own public key from store 'keys/engine.p12' using alias
> > > '1'."
> > > > > >
> > > > > > Hello,
> > > > > >
> > > > > > I attached the output of
> > > > > > make install-dev PREFIX=$HOME/ovirt-engine DEV_REBUILD=0
> > > > >
> > > > > Thanks!
> > > > > So I don't understand how you have invalid values in configuration,
> > > > > as
> > > I
> > > > > see sed is substituting correct values.
> > > > >
> > > > > Can you please attach:
> > > > > /home/wil/ovirt-engine/share/ovirt-engine/conf/engine.conf.defaults
> > > > > /home/wil/ovirt-engine/share/ovirt-engine/services/config.py
> > > > > /home/wil/ovirt-engine/share/ovirt-engine/setup/config.py
> > > > >
> > > > > Just a thought, maybe you once run it as root and python complied the
> > > > > sources as root and now runs the already compiled ones as cannot
> > > override
> > > > > it?
> > > > >
> > > > > So you can try the following to start fresh:
> > > > >
> > > > > $ rm -fr ~/ovirt-engine
> > > > > $ make install-dev PREFIX=$HOME/ovirt-engine DEV_REBUILD=0
> > > > >
> > > > > And run setup again?
> > > > >
> > > > > >
> > > > > >
> > > > > > On Mon, Apr 29, 2013 at 11:48 AM, Alon Bar-Lev <alonbl@redhat.com>
> > > > > wrote:
> > > > > >
> > > > > > >
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > > From: "Limor Gavish" <lgavish@gmail.com>
> > > > > > > > To: "Alon Bar-Lev" <alonbl@redhat.com>
> > > > > > > > Cc: "Yuval M" <yuvalme@gmail.com>, users@ovirt.org, "Nezer
> > > > > Zaidenberg" <
> > > > > > > nzaidenberg@mac.com>, "Vered Volansky"
> > > > > > > > <vered@redhat.com>
> > > > > > > > Sent: Monday, April 29, 2013 11:38:09 AM
> > > > > > > > Subject: Re: [Users] Unable to add host in a development setup
> > > > > > > > -
> > > > > "Host
> > > > > > > kernelpanic.home installation failed. Failed
> > > > > > > > to decode own public key from store 'keys/engine.p12' using
> > > > > > > > alias
> > > > > '1'."
> > > > > > > >
> > > > > > > > Thank you very much for trying to help but ovirt engine still
> > > doesn't
> > > > > > > work
> > > > > > > > - I cannot connect to the server through the web.
> > > > > > >
> > > > > > > Thank you for testing!
> > > > > > > However something is not behaving as expected... need to figure
> > > > > > > out
> > > > > what.
> > > > > > >
> > > > > > > >
> > > > > > > > I have overwritten the otopi the branch like you said:
> > > > > > > >
> > > > > > > > *git checkout engine_3.2*
> > > > > > > > *git branch -D otopi*
> > > > > > > > *git fetch https://github.com/alonbl/ovirt-engine.git otopi*
> > > > > > > > *git checkout -b otopi FETCH_HEAD*
> > > > > > >
> > > > > > > Should be OK
> > > > > > >
> > > > > > > > Then I re-built:
> > > > > > > >
> > > > > > > > *make clean install-dev PREFIX=$HOME/ovirt-engine
> > > > > > > > *
> > > > > > > > *$HOME/ovirt-engine/bin/engine-setup-2
> > > > > > > > --jboss-home=$HOME/ovirt-engine/jboss-as-7.1.1.Final
> > > > > > > > *
> > > > > > > > *$HOME/ovirt-engine/share/ovirt-engine/services/ovirt-engine.py
> > > > > start*
> > > > > > > >
> > > > > > > > But the warnings still appeared:
> > > > > > > >
> > > > > > > > *2013-04-29 10:03:28,061 WARN
> > > > > [org.ovirt.engine.core.utils.LocalConfig]
> > > > > > > > (MSC service thread 1-3) The file
> > > > > > > > "/usr/share/ovirt-engine/conf/engine.conf.defaults" doesn't
> > > exist or
> > > > > > > isn't
> > > > > > > > readable. Will return an empty set of properties.*
> > > > > > > > *2013-04-29 10:03:28,061 WARN
> > > > > [org.ovirt.engine.core.utils.LocalConfig]
> > > > > > > > (MSC service thread 1-3) The file
> > > > > > > > "/etc/ovirt-engine/engine.conf"
> > > > > doesn't
> > > > > > > > exist or isn't readable. Will return an empty set of
> > > > > > > > properties.*
> > > > > > > >
> > > > > > > > I tried to execute the engine-setup-2 command as root (*sudo
> > > > > > > > $HOME/ovirt-engine/bin/engine-setup-2
> > > > > > > > --jboss-home=$HOME/ovirt-engine/jboss-as-7.1.1.Final*) and it
> > > didn't
> > > > > help
> > > > > > > > (I answered all the questions with the default answers - not
> > > sure if
> > > > > that
> > > > > > > > was the right thing to do). Didn't help.
> > > > > > >
> > > > > > > NO... do not runt his as root! this setup should be fully
> > > functioning
> > > > > at
> > > > > > > unprivileged context.
> > > > > > >
> > > > > > > > So I manually created the files "*
> > > > > > > > /usr/share/ovirt-engine/conf/engine.conf.defaults*" and "*
> > > > > > > > /etc/ovirt-engine/engine.conf*" as follows:
> > > > > > > >
> > > > > > > > *[wil@bufferoverflow ~]$ cat
> > > > > > > > /usr/share/ovirt-engine/conf/engine.conf.defaults*
> > > > > > > > *JAVA_HOME=/usr/lib/jvm/jre-1.7.0-openjdk.x86_64*
> > > > > > > > *JBOSS_HOME=/home/wil/ovirt-engine/jboss-as-7.1.1.Final*
> > > > > > >
> > > > > > > Something is wrong... the 'PREFIX' is not set correctly. It
> > > > > > > should
> > > be
> > > > > > > handled at the generated-files rule at Makefile.
> > > > > > >
> > > > > > > Can you please send me the output of:
> > > > > > >
> > > > > > > $ make install-dev PREFIX=$HOME/ovirt-engine DEV_REBUILD=0
> > > > > > >
> > > > > > > Thank you!
> > > > > > >
> > > > > > > > *ENGINE_USER=wil*
> > > > > > > > *ENGINE_GROUP=wil*
> > > > > > > > *ENGINE_PROXY_ENABLED=false*
> > > > > > > > *ENGINE_HTTP_ENABLED=true*
> > > > > > > > *ENGINE_HTTP_PORT=8700*
> > > > > > > > *ENGINE_HTTPS_ENABLED=false*
> > > > > > > > *ENGINE_AJP_ENABLED=false*
> > > > > > > > *ENGINE_DB_USER=postgres*
> > > > > > > > *ENGINE_DB_PASSWORD=*
> > > > > > > > *ENGINE_DEBUG_ADDRESS=0.0.0.0:8787*
> > > > > > > > *#*
> > > > > > > > *# For descriptions of the parameters and their default values
> > > look*
> > > > > > > > *# at the /usr/share/ovirt-engine/conf/engine.conf.defaults
> > > file.*
> > > > > > > > *#*
> > > > > > > > *# Please note that the engine installation tool engine-setup
> > > will*
> > > > > > > > *# append the modified parameters to the end of this file.*
> > > > > > > > *#*
> > > > > > > >
> > > > > > > > and I put the same contents in* /etc/ovirt-engine/engine.conf*
> > > > > > > >
> > > > > > > > Still I can't connect to the ovirt through the web (
> > > > > > > http://127.0.0.1:8700/)
> > > > > > > > I get "*This webpage is not available*".
> > > > > > > > Full logs are attached (last attempt to run ovirt at 10:59).
> > > > > > > >
> > > > > > > > Here are the last two commits in "git log" of my "otopi"
> > > > > > > > branch:
> > > > > > > >
> > > > > > > > *commit 98475140979ee11965154030f54825b14a1510e4*
> > > > > > > > *Author: Alon Bar-Lev <alonbl@redhat.com>*
> > > > > > > > *Date: Thu Apr 25 12:39:50 2013 +0300*
> > > > > > > > *
> > > > > > > > *
> > > > > > > > * packaging: engine-setup re-write using otopi*
> > > > > > > > *
> > > > > > > > *
> > > > > > > > * Change-Id: I4d5e3ac7927802326e324c9b98ada75b421638aa*
> > > > > > > > * Signed-off-by: Alon Bar-Lev <alonbl@redhat.com>*
> > > > > > > > * Signed-off-by: Sandro Bonazzola <sbonazzo@redhat.com>*
> > > > > > > > * Signed-off-by: Alex Lourie <alourie@redhat.com>*
> > > > > > > > *
> > > > > > > > *
> > > > > > > > *commit 3715fda9fe88099344feef59f9c74366a6e6f48d*
> > > > > > > > *Author: Alon Bar-Lev <alonbl@redhat.com>*
> > > > > > > > *Date: Mon Apr 29 02:33:44 2013 +0300*
> > > > > > > > *
> > > > > > > > *
> > > > > > > > * core: re-support broken apache proxy*
> > > > > > > > *
> > > > > > > > *
> > > > > > > > * apache proxy support was broken in:*
> > > > > > > > * I37156061cbdd, 'core: i18n splash screen.'*
> > > > > > > > *
> > > > > > > > *
> > > > > > > > * The changed cause invalid redirection and the following
> > > error
> > > > > > > message
> > > > > > > > in*
> > > > > > > > * console log:*
> > > > > > > > * ---*
> > > > > > > > * Exception while dispatching incoming RPC call:*
> > > > > > > > * java.lang.SecurityException: Blocked request without GWT
> > > base
> > > > > path*
> > > > > > > > * header (XSRF attack?)*
> > > > > > > > * ---*
> > > > > > > > *
> > > > > > > > *
> > > > > > > > * Content:*
> > > > > > > > *
> > > > > > > > *
> > > > > > > > * 1. Remove unused ovirt-engine.html (what was index.html)
> > > > > > > > as
> > > it
> > > > > is*
> > > > > > > > * superseded by index.jsp*
> > > > > > > > *
> > > > > > > > *
> > > > > > > > * 2. Remove redundant welcome directive from web.xml*
> > > > > > > > *
> > > > > > > > *
> > > > > > > > * 3. Rename /index.jsp to /ovirt-engine.jsp to be referenced
> > > by
> > > > > both*
> > > > > > > > * apache and jboss.*
> > > > > > > > *
> > > > > > > > *
> > > > > > > > * 4. Rename servlet mapping of /index to /ovirt-engine.*
> > > > > > > > *
> > > > > > > > *
> > > > > > > > * 5. Modify 404.html pages to redirect to /ovirt-engine
> > > instead
> > > > > of*
> > > > > > > > * /ovirt-engine.html*
> > > > > > > > *
> > > > > > > > *
> > > > > > > > * 6. Remove reference of ovirt-engine.html from the proxy.*
> > > > > > > > *
> > > > > > > > *
> > > > > > > > * Change-Id: I7ac8feb720d73f0b1107b0bf0908930c525ea542*
> > > > > > > > * Signed-off-by: Alon Bar-Lev <alonbl@redhat.com>*
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > On Mon, Apr 29, 2013 at 9:39 AM, Alon Bar-Lev
> > > > > > > > <alonbl@redhat.com
> > > >
> > > > > wrote:
> > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > ----- Original Message -----
> > > > > > > > > > From: "Limor Gavish" <lgavish@gmail.com>
> > > > > > > > > > To: "Alon Bar-Lev" <alonbl@redhat.com>
> > > > > > > > > > Cc: "Yuval M" <yuvalme@gmail.com>, users@ovirt.org, "Nezer
> > > > > > > Zaidenberg" <
> > > > > > > > > nzaidenberg@mac.com>, "Vered Volansky"
> > > > > > > > > > <vered@redhat.com>
> > > > > > > > > > Sent: Monday, April 29, 2013 8:28:47 AM
> > > > > > > > > > Subject: Re: [Users] Unable to add host in a development
> > > setup -
> > > > > > > "Host
> > > > > > > > > kernelpanic.home installation failed. Failed
> > > > > > > > > > to decode own public key from store 'keys/engine.p12' using
> > > alias
> > > > > > > '1'."
> > > > > > > > > >
> > > > > > > > > > Thank you very much for your prompt response. However,
> > > according
> > > > > to
> > > > > > > "git
> > > > > > > > > > rebase" (after "git fetch") there is no new change
> > > > > > > > > >
> > > > > > > > > > [wil@bufferoverflow repository]$ git fetch
> > > > > > > > > > https://github.com/alonbl/ovirt-engine.git otopi
> > > > > > > > > > From https://github.com/alonbl/ovirt-engine
> > > > > > > > > > * branch otopi -> FETCH_HEAD
> > > > > > > > > > [wil@bufferoverflow repository]$ git rebase --merge
> > > FETCH_HEAD
> > > > > > > > > > *Current branch otopi is up to date.*
> > > > > > > > > > *
> > > > > > > > > > *
> > > > > > > > > > The latest change I see in "git log" is
> > > > > > > > > >
> > > > > > > > > > [wil@bufferoverflow repository]$ git show HEAD
> > > > > > > > > > commit 99d95891ab0e814159a463d246543b08e41c746d
> > > > > > > > > > Author: Alon Bar-Lev <alonbl@redhat.com>
> > > > > > > > > > Date: Thu Apr 25 12:39:50 2013 +0300
> > > > > > > > > >
> > > > > > > > > > packaging: engine-setup re-write using otopi
> > > > > > > > > >
> > > > > > > > > > Change-Id: I4d5e3ac7927802326e324c9b98ada75b421638aa
> > > > > > > > > > Signed-off-by: Alon Bar-Lev <alonbl@redhat.com>
> > > > > > > > > > Signed-off-by: Sandro Bonazzola <sbonazzo@redhat.com>
> > > > > > > > > > Signed-off-by: Alex Lourie <alourie@redhat.com>
> > > > > > > > > >
> > > > > > > > > > If you don't wish to push the change yet, you can send a
> > > patch
> > > > > and I
> > > > > > > will
> > > > > > > > > > apply it.
> > > > > > > > >
> > > > > > > > > This branch is rolling rebase, forced push, so rebase will
> > > > > > > > > not
> > > > > work in
> > > > > > > > > this regard.
> > > > > > > > > Soon it will be merged to master so it will be easier to
> > > > > > > > > track.
> > > > > > > > >
> > > > > > > > > Please try:
> > > > > > > > >
> > > > > > > > > $ git checkout master
> > > > > > > > > $ git branch -D otopi
> > > > > > > > > $ git fetch
> > > > > > > > > $ git checkout otopi
> > > > > > > > >
> > > > > > > > > You should have:
> > > > > > > > > commit 98475140979ee11965154030f54825b14a1510e4
> > > > > > > > >
> > > > > > > > > Thanks!
> > > > > > > > > Alon.
> > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > On Mon, Apr 29, 2013 at 1:04 AM, Alon Bar-Lev <
> > > alonbl@redhat.com
> > > > > >
> > > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > ----- Original Message -----
> > > > > > > > > > > > From: "Limor Gavish" <lgavish@gmail.com>
> > > > > > > > > > > > To: "Alon Bar-Lev" <alonbl@redhat.com>
> > > > > > > > > > > > Cc: "Yuval M" <yuvalme@gmail.com>, users@ovirt.org,
> > > "Nezer
> > > > > > > > > Zaidenberg" <
> > > > > > > > > > > nzaidenberg@mac.com>, "Vered Volansky"
> > > > > > > > > > > > <vered@redhat.com>
> > > > > > > > > > > > Sent: Sunday, April 28, 2013 10:56:45 PM
> > > > > > > > > > > > Subject: Re: [Users] Unable to add host in a
> > > > > > > > > > > > development
> > > > > setup -
> > > > > > > > > "Host
> > > > > > > > > > > kernelpanic.home installation failed. Failed
> > > > > > > > > > > > to decode own public key from store 'keys/engine.p12'
> > > using
> > > > > alias
> > > > > > > > > '1'."
> > > > > > > > > > > >
> > > > > > > > > > > > Hi,
> > > > > > > > > > > >
> > > > > > > > > > > > Thank you very much for your help but I do not succeed
> > > > > > > > > > > > to
> > > > > start
> > > > > > > the
> > > > > > > > > > > engine
> > > > > > > > > > > > after compiling your version.
> > > > > > > > > > > >
> > > > > > > > > > > > I switched to the otopi branch like you said.
> > > > > > > > > > > > git fetch
> > > > > > > > > > > > https://github.com/alonbl/ovirt-engine.gitotopi
> > > > > > > > > > > > git checkout -b otopi FETCH_HEAD
> > > > > > > > > > > >
> > > > > > > > > > > > I followed the instructions in
> > > > > > > > > > > >
> > > > > > > https://github.com/alonbl/ovirt-engine/blob/otopi/README.developer
> > > > > > > > > > > > *So here are the last 3 commands I used:*
> > > > > > > > > > > > make clean install-dev PREFIX=$HOME/ovirt-engine
> > > > > > > > > > > > $HOME/ovirt-engine/bin/engine-setup-2
> > > > > > > > > > > > --jboss-home=$HOME/ovirt-engine/jboss-as-7.1.1.Final
> > > > > > > > > > > >
> > > > > $HOME/ovirt-engine/share/ovirt-engine/services/ovirt-engine.py
> > > > > > > start
> > > > > > > > > > > >
> > > > > > > > > > > > However, the last command
> > > > > > > > > > > >
> > > > > ($HOME/ovirt-engine/share/ovirt-engine/services/ovirt-engine.py
> > > > > > > > > start)
> > > > > > > > > > > > hangs.
> > > > > > > > > > >
> > > > > > > > > > > This is expected... it is the service running, Ctrl-C to
> > > > > terminate.
> > > > > > > > > > >
> > > > > > > > > > > > *In server.log I see the following error:*
> > > > > > > > > > > > 2013-04-28 22:13:40,203 ERROR [org.jboss.as] (MSC
> > > service
> > > > > thread
> > > > > > > > > 1-3)
> > > > > > > > > > > > JBAS015875: JBoss AS 7.1.1.Final "Brontes" started
> > > > > > > > > > > > (with
> > > > > errors)
> > > > > > > in
> > > > > > > > > > > 2788ms
> > > > > > > > > > > > - Started 504 of 5 40 services (1 services failed
> > > > > > > > > > > > or
> > > > > missing
> > > > > > > > > > > > dependencies, 34 services are passive or on-demand)
> > > > > > > > > > > > *In engine.log I see the following error:*
> > > > > > > > > > > > 2013-04-28 22:13:40,082 ERROR
> > > > > > > > > > > > [org.ovirt.engine.core.utils.ErrorTranslatorImpl] (MSC
> > > > > service
> > > > > > > thread
> > > > > > > > > > > 1-4)
> > > > > > > > > > > > File: bundles/VdsmErrors could not be loaded:
> > > java.util.Mis
> > > > > > > > > > > > singResourceException: Can't find bundle for base name
> > > > > > > > > > > bundles/VdsmErrors,
> > > > > > > > > > > > locale en_US
> > > > > > > > > > > >
> > > > > > > > > > > > Full logs are attached.
> > > > > > > > > > >
> > > > > > > > > > > The problem is that for some reason the PREFIX is not
> > > > > > > > > > > taken
> > > > > into
> > > > > > > > > account.
> > > > > > > > > > >
> > > > > > > > > > > Related errors:
> > > > > > > > > > > 2013-04-28 19:57:46,468 WARN
> > > > > > > [org.ovirt.engine.core.utils.LocalConfig]
> > > > > > > > > > > (MSC service thread 1-3) The file
> > > > > > > > > > > "/usr/share/ovirt-engine/conf/engine.conf.defaults"
> > > > > > > > > > > doesn't
> > > > > exist
> > > > > > > or
> > > > > > > > > isn't
> > > > > > > > > > > readable. Will return an empty set of properties.
> > > > > > > > > > > 2013-04-28 19:57:46,468 WARN
> > > > > > > [org.ovirt.engine.core.utils.LocalConfig]
> > > > > > > > > > > (MSC service thread 1-3) The file
> > > > > "/etc/ovirt-engine/engine.conf"
> > > > > > > > > doesn't
> > > > > > > > > > > exist or isn't readable. Will return an empty set of
> > > > > properties.
> > > > > > > > > > >
> > > > > > > > > > > It can be due to previous make execution without PREFIX.
> > > > > > > > > > > I've committed a change to Makefile to force regenerate
> > > > > > > > > > > the
> > > > > file
> > > > > > > > > locations
> > > > > > > > > > > when using install-dev.
> > > > > > > > > > > Can you please give it a try?
> > > > > > > > > > >
> > > > > > > > > > > Thanks!
> > > > > > > > > > >
> > > > > > > > > > > > Thanks,
> > > > > > > > > > > > Limor on behalf of Yuval
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > On Sun, Apr 28, 2013 at 2:51 PM, Alon Bar-Lev <
> > > > > alonbl@redhat.com
> > > > > > > >
> > > > > > > > > wrote:
> > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > Maybe someone can help you in this.
> > > > > > > > > > > > >
> > > > > > > > > > > > > I prefer people install development mode and use
> > > > > > > > > > > > > fully
> > > > > > > functional
> > > > > > > > > > > product
> > > > > > > > > > > > > within their development environment.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Alon
> > > > > > > > > > > > >
> > > > > > > > > > > > > ----- Original Message -----
> > > > > > > > > > > > > > From: "Yuval M" <yuvalme@gmail.com>
> > > > > > > > > > > > > > To: "Alon Bar-Lev" <alonbl@redhat.com>
> > > > > > > > > > > > > > Cc: users@ovirt.org, "Nezer Zaidenberg" <
> > > > > nzaidenberg@mac.com
> > > > > > > >,
> > > > > > > > > > > "Limor
> > > > > > > > > > > > > Gavish" <lgavish@gmail.com>, "Vered Volansky"
> > > > > > > > > > > > > > <vered@redhat.com>
> > > > > > > > > > > > > > Sent: Sunday, April 28, 2013 12:45:33 PM
> > > > > > > > > > > > > > Subject: Re: [Users] Unable to add host in a
> > > development
> > > > > > > setup -
> > > > > > > > > > > "Host
> > > > > > > > > > > > > kernelpanic.home installation failed. Failed
> > > > > > > > > > > > > > to decode own public key from store
> > > > > > > > > > > > > > 'keys/engine.p12'
> > > > > using
> > > > > > > alias
> > > > > > > > > > > '1'."
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > But is there an option to just manually install the
> > > new
> > > > > host?
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Yuval
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > On Sun, Apr 28, 2013 at 11:46 AM, Alon Bar-Lev <
> > > > > > > > > alonbl@redhat.com>
> > > > > > > > > > > > > wrote:
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Development mode installation is not yet
> > > > > > > > > > > > > > > supported
> > > to
> > > > > > > perform
> > > > > > > > > > > > > host-deploy.
> > > > > > > > > > > > > > > There is ongoing work for fully functional
> > > development
> > > > > > > > > environment.
> > > > > > > > > > > > > > > You can test this if you like before it is merged
> > > > > upstream.
> > > > > > > > > > > > > > > Sources available here[1], documentation is
> > > here[2].
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > [1]
> > > https://github.com/alonbl/ovirt-engine/tree/otopi
> > > > > > > > > > > > > > > [2]
> > > > > > > > > > >
> > > > > https://github.com/alonbl/ovirt-engine/blob/otopi/README.developer
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > ----- Original Message -----
> > > > > > > > > > > > > > > > From: "Yuval M" <yuvalme@gmail.com>
> > > > > > > > > > > > > > > > To: users@ovirt.org, "Nezer Zaidenberg" <
> > > > > > > nzaidenberg@mac.com
> > > > > > > > > >,
> > > > > > > > > > > > > "Limor
> > > > > > > > > > > > > > > Gavish" <lgavish@gmail.com>
> > > > > > > > > > > > > > > > Sent: Saturday, April 27, 2013 5:22:59 PM
> > > > > > > > > > > > > > > > Subject: [Users] Unable to add host in a
> > > development
> > > > > > > setup -
> > > > > > > > > > > "Host
> > > > > > > > > > > > > > > kernelpanic.home installation failed. Failed to
> > > > > > > > > > > > > > > > decode own public key from store
> > > 'keys/engine.p12'
> > > > > using
> > > > > > > > > alias
> > > > > > > > > > > '1'."
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > I'm getting the aforementioned error message
> > > > > > > > > > > > > > > > when
> > > > > trying
> > > > > > > to
> > > > > > > > > > > > > reinstall a
> > > > > > > > > > > > > > > host
> > > > > > > > > > > > > > > > that failed to be added to the cluster.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > in the engine log I have:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > 2013-04-27 16:29:58,249 ERROR
> > > > > > > > > > > > > > > [org.ovirt.engine.core.bll.InstallVdsCommand]
> > > > > > > > > > > > > > > > (pool-3-thread-49) [3070670b] Host installation
> > > > > failed
> > > > > > > for
> > > > > > > > > host
> > > > > > > > > > > > > > > > cf09fb25-b8a4-4068-a
> > > > > > > > > > > > > > > > 3c8-9869d0ba4ff9, kernelpanic.home.:
> > > > > > > > > java.lang.RuntimeException:
> > > > > > > > > > > > > Failed
> > > > > > > > > > > > > > > to
> > > > > > > > > > > > > > > > decode own public key from store
> > > 'keys/engine.p12'
> > > > > using
> > > > > > > > > alias
> > > > > > > > > > > '1'
> > > > > > > > > > > > > > > > at
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > >
> > > > > > >
> > > > >
> > > org.ovirt.engine.core.bll.VdsDeploy._getEngineSSHPublicKey(VdsDeploy.java:227)
> > > > > > > > > > > > > > > > [bll.jar:]
> > > > > > > > > > > > > > > > at
> > > > > > > > > > >
> > > > > org.ovirt.engine.core.bll.VdsDeploy.access$400(VdsDeploy.java:71)
> > > > > > > > > > > > > > > > [bll.jar:]
> > > > > > > > > > > > > > > > at
> > > > > > > > > org.ovirt.engine.core.bll.VdsDeploy$9.call(VdsDeploy.java:334)
> > > > > > > > > > > > > > > [bll.jar:]
> > > > > > > > > > > > > > > > at
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > >
> > > > > > >
> > > > >
> > > org.ovirt.engine.core.bll.VdsDeploy._nextCustomizationEntry(VdsDeploy.java:476)
> > > > > > > > > > > > > > > > [bll.jar:]
> > > > > > > > > > > > > > > > at
> > > > > > > > > > > > >
> > > > > > > org.ovirt.engine.core.bll.VdsDeploy._threadMain(VdsDeploy.java:687)
> > > > > > > > > > > > > > > > [bll.jar:]
> > > > > > > > > > > > > > > > at
> > > > > > > > > > >
> > > > > org.ovirt.engine.core.bll.VdsDeploy.access$1400(VdsDeploy.java:71)
> > > > > > > > > > > > > > > > [bll.jar:]
> > > > > > > > > > > > > > > > at
> > > > > > > > > org.ovirt.engine.core.bll.VdsDeploy$32.run(VdsDeploy.java:779)
> > > > > > > > > > > > > > > [bll.jar:]
> > > > > > > > > > > > > > > > at java.lang.Thread.run(Thread.java:722)
> > > > > > > > > > > [rt.jar:1.7.0_09-icedtea]
> > > > > > > > > > > > > > > > Caused by: java.io.FileNotFoundException:
> > > > > > > keys/engine.p12 (No
> > > > > > > > > > > such
> > > > > > > > > > > > > file
> > > > > > > > > > > > > > > or
> > > > > > > > > > > > > > > > directory)
> > > > > > > > > > > > > > > > at java.io.FileInputStream.open(Native Method)
> > > > > > > > > > > > > [rt.jar:1.7.0_09-icedtea]
> > > > > > > > > > > > > > > > at
> > > > > > > java.io.FileInputStream.<init>(FileInputStream.java:138)
> > > > > > > > > > > > > > > > [rt.jar:1.7.0_09-icedtea]
> > > > > > > > > > > > > > > > at
> > > > > > > java.io.FileInputStream.<init>(FileInputStream.java:97)
> > > > > > > > > > > > > > > > [rt.jar:1.7.0_09-icedtea]
> > > > > > > > > > > > > > > > at
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > >
> > > > > > >
> > > > >
> > > org.ovirt.engine.core.bll.VdsDeploy._getEngineSSHPublicKey(VdsDeploy.java:206)
> > > > > > > > > > > > > > > > [bll.jar:]
> > > > > > > > > > > > > > > > ... 7 more
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > My setup has an all-in-one node with the engine
> > > > > installed
> > > > > > > > > from
> > > > > > > > > > > > > sources,
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > and I'm attempting to add a seconds host
> > > > > > > > > > > > > > > > (Fedora
> > > 18,
> > > > > vdsm
> > > > > > > > > from
> > > > > > > > > > > yum,
> > > > > > > > > > > > > > > nothing
> > > > > > > > > > > > > > > > fancy).
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > I installed vdsm (yum install vdsm), and
> > > > > > > > > > > > > > > > disabled
> > > > > SSL as
> > > > > > > > > > > instructed
> > > > > > > > > > > > > in:
> > > > > > > > > > > > > > > > http://www.ovirt.org/OVirt_-_disable_SSL_in_VDSM
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > I read here that the development setup (i.e
> > > engine
> > > > > > > installed
> > > > > > > > > from
> > > > > > > > > > > > > > > sources)
> > > > > > > > > > > > > > > > does not support automatic deployment:
> > > > > > > > > > > > > > > >
> > > > > > > http://www.mail-archive.com/users@ovirt.org/msg07608.html
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Is this still the case?
> > > > > > > > > > > > > > > > If so, how do I deploy an additional host in
> > > such a
> > > > > > > setup?
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Thanks,
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Yuval Meir
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > _______________________________________________
> > > > > > > > > > > > > > > > Users mailing list
> > > > > > > > > > > > > > > > Users@ovirt.org
> > > > > > > > > > > > > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> _______________________________________________
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>