Hi Will,

The engine relies on the status reported by VDSM for the management network 'ovirtmgmt' and for its underlying nics/vlans.

In order to see the configuration of 'ovirtmgmt' network please paste the output of the following command to be executed on the host:
vdsClient -s 0 getVdsCaps

In addition, in order to see the reported status of the networks run and paste on the host:
vdsClient -s 0 getVdsStats

That should give the indication of which nic is reported as down for ovirtmgmt by vdsm.

On Wed, Jan 6, 2016 at 11:15 AM, Eliraz Levi <elevi@redhat.com> wrote:
Hi Will how are you?
The log is first pointing about certifications issues:
2016-01-04 00:02:11,259 ERROR [org.ovirt.engine.core.vdsbroker.jsonrpc.JsonRpcVdsServer] (DefaultQuartzScheduler_Worker-81) [] Failed to get peer certification for host 'ovirt-node-02': SSL session is invalid
2016-01-04 00:02:11,259 ERROR [org.ovirt.engine.core.bll.CertificationValidityChecker] (DefaultQuartzScheduler_Worker-81) [] Failed to retrieve peer certifications for host 'ovirt-node-02'

So first thing we should do is to try and solve this problem.
Please try to re install the host.
Thanks.
Eliraz :)

----- Original Message -----
From: "Will Dennis" <wdennis@nec-labs.com>
To: "Eliraz Levi" <elevi@redhat.com>, "users" <users@ovirt.org>
Sent: Tuesday, 5 January, 2016 5:46:23 AM
Subject: Re: [ovirt-users] host status "Non Operational" - how to diagnose & fix?

I must admit I’m getting a bit weary of fighting oVirt problems at this point… Before I move on to deploying any VMs onto my new infra, I’d like to get the base infra working…

I’m still experiencing a “Non Operational” problem on my “ovirt-node-02” host:
http://s1096.photobucket.com/user/willdennis/media/ovirt-node-02_problem.png.html

I have pored thru the logs (all the engine logs, plus the syslogs from the engine VM + and my three hypervisor/storage hosts) and I can’t pin down why the one node is having a problem… Of course with how voluminous all these logs are, it’s kind of like looking for a needle in a haystack, and I’m not even sure what the needle looks like, or if it’s even a needle :-/

I have also rebooted this host in past days, this also did not fix the problem.

Note that on the screenshot I posted above, that the webadmin hosts screen says that -node-01 has one VM running, and the others 0… You’d think that would be the HE VM running on there, but it’s actually on -node-02:

$ ansible istgroup-ovirt -f 1 -i prod -u root -m shell -a "hosted-engine --vm-status | grep -e '^Hostname' -e '^Engine'"
ovirt-node-01 | success | rc=0 >>
Hostname                           : ovirt-node-01
Engine status                      : {"reason": "bad vm status", "health": "bad", "vm": "down", "detail": "down"}
Hostname                           : ovirt-node-02
Engine status                      : {"health": "good", "vm": "up", "detail": "up"}
Hostname                           : ovirt-node-03
Engine status                      : {"reason": "vm not running on this host", "health": "bad", "vm": "down", "detail": "unknown"}

ovirt-node-02 | success | rc=0 >>
Hostname                           : ovirt-node-01
Engine status                      : {"reason": "bad vm status", "health": "bad", "vm": "down", "detail": "down"}
Hostname                           : ovirt-node-02
Engine status                      : {"health": "good", "vm": "up", "detail": "up"}
Hostname                           : ovirt-node-03
Engine status                      : {"reason": "vm not running on this host", "health": "bad", "vm": "down", "detail": "unknown"}

ovirt-node-03 | success | rc=0 >>
Hostname                           : ovirt-node-01
Engine status                      : {"reason": "bad vm status", "health": "bad", "vm": "down", "detail": "down"}
Hostname                           : ovirt-node-02
Engine status                      : {"health": "good", "vm": "up", "detail": "up"}
Hostname                           : ovirt-node-03
Engine status                      : {"reason": "vm not running on this host", "health": "bad", "vm": "down", "detail": "unknown”}

So it looks like the webadmin UI is wrong as well…

It would be awesome if the UI would give a reason for the “Non Operational” status somehow… Or if there was a troubleshooter that could be used to analyze the problem… As it is, being so new to all of this, I am completely at the list’s mercy to figure this out.

This software has such promise, so I’ll keep working thru these issues, but it sure hasn’t been a smooth ride so far…


On Jan 4, 2016, at 7:54 AM, Will Dennis <wdennis@nec-labs.com<mailto:wdennis@nec-labs.com>> wrote:

I put all of the engine logs up there now… Try engine.log-20160103.gzhttp://i1096.photobucket.com/albums/g330/willdennis/ovirt-node-02_problem.png
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



--
Regards,
Moti