Hello,

I'm still strugling with adding a nfs share from my synology share.

When I log on to my node and do a pint to the synology server

[root@ovirtnode005 ~]# ping -c 4 ovirtstorcl001.get.be
PING ovirtstorcl001.get.be (192.168.203.199) 56(84) bytes of data.
64 bytes from ovirtstorcl001.get.be (192.168.203.199): icmp_seq=1 ttl=64 time=0.191 ms
64 bytes from ovirtstorcl001.get.be (192.168.203.199): icmp_seq=2 ttl=64 time=0.142 ms
64 bytes from ovirtstorcl001.get.be (192.168.203.199): icmp_seq=3 ttl=64 time=0.168 ms
64 bytes from ovirtstorcl001.get.be (192.168.203.199): icmp_seq=4 ttl=64 time=0.176 ms

--- ovirtstorcl001.get.be ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3000ms
rtt min/avg/max/mdev = 0.142/0.169/0.191/0.020 ms

If I list the shares available on my synology server

[root@ovirtnode005 ~]# showmount -e ovirtstorcl001.get.be
Export list for ovirtstorcl001.get.be:
/volume1/GETQUADATA001 *

If I mount the nfs share

[root@ovirtnode005 ~]# mkdir /mnt/nfs

[root@ovirtnode005 ~]# mount -t nfs ovirtstorcl001.get.be:/volume1/GETQUADATA001 /mnt/nfs

[root@ovirtnode005 ~]# ls -l /mnt/nfs
total 0
drwxrwxrwx 1 vdsm kvm 22 Jun 27 15:26 #recycle

[root@ovirtnode005 ~]# umount /mnt/nfs
[root@ovirtnode005 ~]# ls -l /mnt/nfs
total 0
[root@ovirtnode005 ~]#

But when I Want to create a new nfs datadomain it tell's me I have issues with permissions

Op vr 28 jun. 2019 om 19:29 schreef Andy Michielsen <andy.michielsen@gmail.com>:
Hello All,

Thank you for the replies.

I read the url and I think I did it all as discribed.
I did a ssh into the synology and changed the owner and group for the volume I created and the folder I'm sharing with NFS. I did the the mounting test on the engine and also on the node. And I unmounted it afterwards.

But I will try and log on with the vdsm user. Have to look for the password and then I will try and mount again.

Kind regards.

Op vr 28 jun. 2019 om 16:35 schreef Staniforth, Paul <P.Staniforth@leedsbeckett.ac.uk>:

Are the user group and permissions set correctly vdsm:kvm?

The storage is mounted on the nodes not the engine.

have you unmounted the storage after your test?


Good Luck,

                 Paul S.

From: Andy Michielsen <andy.michielsen@gmail.com>
Sent: 28 June 2019 14:12
To: users
Subject: [ovirt-users] Using a synology as an nfs storage
 
Hello,

I'm setting up a 3 node cluster with the ovirtnode iso and a seperate server with the engine on and a synology for nfs storage.

I have done my configuration and I'm able to mount the share manually on the node with a command. Also on the server with the engine on I can mount it manually. But when I want to do it through the webinterface to add a data domain it say the permissions are wrong.

Any idea's on how to figure this out ?

Kind regards.
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/