I successfully installed Ovirt Node NG from ISO to an ISCSI target attached via first network interface by using following extensions to the grub cmdline:

After successful install the system reboots and starts up but it fails later in dracut even having detected correctly the disk and all the LV's.

I think "iscsistart" is run multiple times even after already being logged in to the ISCSI-Target and that fails finally like that:

[ 147.644872] localhost dracut-initqueue[1075]: iscsistart: initiator reported error (15 - session exists)[ 147.645588] localhost dracut-initqueue[1075]: iscsistart: Logging into iqn.2018-01.de.databay.office:storage01.epycdphv02-disk1 172.16.1.3:3260,1[ 147.651027] localhost dracut-initqueue[1075]: Warning: 'iscsistart -b ' failed with return code 0[ 147.807510] localhost systemd[1]: Starting Login iSCSI Target...[ 147.809293] localhost iscsistart[6716]: iscsistart: TargetName not set. Exiting iscsistart[ 147.813625] localhost systemd[1]: iscsistart_iscsi.service: main process exited, code=exited, status=7/NOTRUNNING[ 147.824897] localhost systemd[1]: Failed to start Login iSCSI Target.[ 147.825050] localhost systemd[1]: Unit iscsistart_iscsi.service entered failed state.[ 147.825185] localhost systemd[1]: iscsistart_iscsi.service failed.

After a long timeout dracut drops to a shell.
I attach my shortended and cleaned rdsosreport.txt. Can someone help me find a workaround ?

Bye

--


Ralf Schenk fon +49 (0) 24 05 / 40 83 70 fax +49 (0) 24 05 / 40 83 759 mail rs@databay.de		Databay AG Jens-Otto-Krag-Straße 11 D-52146 Würselen www.databay.de
Sitz/Amtsgericht Aachen • HRB:8437 • USt-IdNr.: DE 210844202 Vorstand: Ralf Schenk, Dipl.-Ing. Jens Conze, Aresch Yavari, Dipl.-Kfm. Philipp Hermanns Aufsichtsratsvorsitzender: Wilhelm Dohmen