On Fri, 2016-06-03 at 08:41 +0200, jvandewege wrote:
On 3-6-2016 3:23, Brett I. Holcomb wrote:
After using oVirt for about three months I have some questions that
really haven't been answered in any of the documentation, posts, or
found in searching. Or maybe more correctly I've found some answers
but am trying to put the pieces I've found together.
My setup is one physical host that used to run VMware ESXi6 and it
handled running the VMs on an iSCSI LUN on a Synology 3615xs unit. I
have one physical Windows workstation and all the servers, DNS, DHCP,
file, etc. are VMs. The VMs are on an iSCSI LUN on the Synology.
* Hosted-engine deployment - Run Engine as a VM. This has the
advantage of using one machine for host and running the Engine as a VM
but what are the cons of it?
Not many but I can think of one: if there is a problem with the storage
where the engine VM is running then it can be a challenge to get things
working again. You can guard against that by not using your host as your
main testing workstation :-)
Unfortunately, I only have one physical host available. The storage is NFS on the host which has a RAID10 array setup. Not optimum but it's what I've got.
* Can I run the Engine on the host that will run the VMs without
running it on a VM? That is I install the OS on my physical box,
install Engine, then setup datastores (iSCSI LUN), networking etc.
That used to be possible up to 3.5 and is called all-in-one setup.
I remember reading about that and it's deprecated if I remember.
* How do I run more than one Engine. With just one there is no
redundancy so can I run another Engine that access the same
Datacenter, etc. as the first? Or does each Engine have to have it's
own Datacenter and the backup is achieved by migrating between the
Engine's Datacenters as needed.
There is just one Engine and normally you would have more hosts and it
would migrate around those hosts using the shared storage if you need to
do maintenance on those hosts.
* Given I have a hosted Engine setup how can I "undo" it and get to
running just the Engine on the host. Do I have to undo everything or
can I just install another instance of the Engine on the host but not
in a VM, move the VMs to it and then remove the Engine VM.
Get a second physical box, install an OS, install Engine on it and
restore the db backup on it and this should work. AIO setup isn't
possible in 3.6 onwards.
* System shutdown - If I shutdown the host what is the proper
procedure? Go to global maintenance mode and then shutdown the host
or do I have to do some other steps to make sure VMs don't get
corrupted. On ESXi we'd put a host into maintenance mode after
shutting down or moving the VMs so I assume it's the same here.
Shutdown VMS since there is nowhere to move the VMS, go into global
maintenance mode. Shutdown. On startup the Engine will come up, then
I start my VMs.
- Shutdown any VMs that are running
- stop ovirt-ha-agent and ovirt-ha-broker (they keep the Engine up)
- stop the Engine
- stop vdsmd
- stop sanlock
- unmount the shared storage
- shutdown host.
The Engine will come up once you powerup the host. If you use
hosted-engine --set-maintenance --mode=global then ha-agent/ha-broker
won't start the Engine for you. You have to use hosted-engine
--mode=none first. You could add that to your system startup if you
prefer this sequence.
The above is my own recipe and works for me YMMV. (got it scripted and
can post it but it does more or less what I wrote)
Thanks. That helps. If you get a chance I'd like the script.
* Upgrading engine and host - Do I have to go to maintenance mode then
run yum to install the new versions on the host and engine and then
run engine-setup or do I need to go into maintenance mode? I assume
the 4.0 production install will be much more involved but hopefully
keeping updated will make it a little less painful.
Its on the wiki somewhere but I think the order is:
- enable global maintenance on the host
- upgrade the engine by running engine-setup and it will tell you
whether it needs a yum upgrade engine-setup or it will do the oVirt
engine upgrade straightaway
- upgrade the rest of the engine packages and restart
- while the engine is down, upgrade the host and restart if needed
- disable global maintenance on the host and if all is well Engine will
While hosted-engine seems complicated I haven't had any major issues
with it but neither have my other oVirt deployments, standalone Engine
Hope this answers some of your questions,
Thanks. This clarifies a lot. I had things down pat with ESXi but with oVirt I have to learn how it thinks.
Users mailing list