Hi,

I really needed to enable the hook... Will investigate on new hosts!

2014-05-11 22:37 GMT+02:00 Itamar Heim <iheim@redhat.com>:

On 04/17/2014 04:08 AM, Matt . wrote:

Hi Guys,

I'm not able to write a howto yet as we need to check how this is
running on high traffic and we are going soon. Than, we need to test
some other functions before I can actually write something down.

Because this is not all documented well indeed I'm in testmode and doing
some @ life system as reallife environments are always coming with other
things than your prefec test.

I cannot say I needed promiscuouity, I did some things you would
normally do on pfsense which fixed that part. Some old message you
really need to discard instead of clicking it away was confusing this test.

you are not supposed to need the promiscious hook for sniffing/mirroring - that's by now part of engine/vdsm (at vnic level in earlier versions, and at network profile in later versions iirc)

2014-04-17 9:08 GMT+02:00 Dan Kenigsberg <danken@redhat.com

<mailto:danken@redhat.com>>:

    On Thu, Apr 17, 2014 at 01:11:13AM +0200, Matt . wrote:
     > OK, also this is finetuned, but it would be nice to have some
    more info
     > about the hooks in these cases... it's interesting as oVirt has
    the right
     > settings to start with but we need to know what we need to set
    when we have
     > a setup like this for an example.

    Could you explain what you have done, and what do you need promiscuouity
    for? oVirt has "port mirroring" that allows to mirror ip traffic from
    one vm network to another.

     >
     >
     > 2014-04-17 0:35 GMT+02:00 Matt . <yamakasi.014@gmail.com

    <mailto:yamakasi.014@gmail.com>>:

     >
     > > Traffic issues are solved, but the advertising in not that well.
     > >
     > > I see on ESXi (vSphere) that you need to enable "Promiscuous
    Mode", but
     > > how on oVirt ?
     > >
     > >
    http://www.blissfulidiot.com/2013/11/using-carp-with-vmware-esxi.html
     > >
     > > Do I need the vdsm-hook-promisc for it ? as I need to make real
    settings
     > > on a VM there I think the vswitch only needs the mode.
     > >
     > > Information is welcome!

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users