I will check ‘/var/log/gluster’. I had commented out the filter in ‘/etc/lvm/lvm.conf’ - if I don’t the creation of volume groups fails because lvm drives are excluded by filter. Should I not be commenting it out but modifying it in some way?

Thanks!

Charles

On Tue, Jan 12, 2021 at 12:11 AM Strahil Nikolov <hunter86_bg@yahoo.com> wrote:

I tried Gluster deployment after cleaning within the Cockpit web console, using the suggested ansible-playbook and fresh image with oVirt Node v4.4 ISO. Ping from each host to the other two works for both mgmt and storage networks. I am using DHCP for management network, hosts file for direct connect storage network.

I've tested the command on a test Gluster 8.3 cluster and it passes.Have you checked the gluster logs in '/var/log/gluster' ? I know that there is LVM filtering on oVirt 4.4 enabled, so can you take a look in the lvm conf : grep -Ev "^$|#" /etc/lvm/lvm.conf | grep filter

VDO is using lvm.conf too, so it could cause strange issues. What happens when the deployment fails and you rerun (ansible should be idempotent) ?

Best Regards,
Strahil Nikolov