Lev,
Here’s the ip route from the server that worked and didn’t work
IP Route from server that worked
[root@paputopcomm04 ~]# ip route
default via 172.21.0.250 dev eno3
169.254.0.0/16 dev eno3 scope link metric 1002
169.254.0.0/16 dev eno4 scope link metric 1005
172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18
172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34
172.22.20.31 via 172.21.12.61 dev eno3
172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34
IP Route from server that didn't work
-bash-4.2# ip route
default via 172.21.0.250 dev ovirtmgmt
169.254.0.0/16 dev eno4 scope link metric 1004
169.254.0.0/16 dev ovirtmgmt scope link metric 1021
172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.15
172.21.0.0/16 dev ovirtmgmt proto kernel scope link src 172.21.5.31
172.22.20.31 via 172.21.12.61 dev ovirtmgmt
172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.31
We have had our network team look and they don’t know. As I said, the was setup by Commvault. It’s almost like the ovirtmgmt interface will not allow a route add due to the way it’s configured? They, Commvault, are trying different
things within their software to get this working, but it’s causing us more problems. I figured I would take a shot and see if someone, who works with the oVirt software, would have any ideas.
|
|
Doug Maxfield
| Senior Operating Systems Analyst |
From: Lev Veyde <lveyde@redhat.com>
Sent: Tuesday, February 12, 2019 11:51 AM
To: Doug Maxfield <Doug.L.Maxfield@EMCIns.com>
Cc: users <users@ovirt.org>
Subject: Re: [ovirt-users] Creating a static route
Hi Doug,
This is indeed quite weird...
It looks like the OS for some reason disregards the static route that you have added.
BTW, have you verified that it's indeed was added by running "ip route" following the "ip route add ..." command ?
Maybe somebody from the network team has an idea of what may be the cause of this issue...
Thanks in advance,
On Tue, Feb 12, 2019 at 7:36 PM Doug Maxfield <Doug.L.Maxfield@emcins.com> wrote:
Lev,
I’m showing you the same outputs (ip a, ip route, traceroute, ip route add, and traceroute) from another server in this group that doesn’t use the ovirtmgmt for it’s default interface.
[root@paputopcomm04 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 90:1b:0e:db:bc:c0 brd ff:ff:ff:ff:ff:ff
inet 172.21.5.34/16 brd 172.21.255.255 scope global eno3
valid_lft forever preferred_lft forever
inet6 fe80::921b:eff:fedb:bcc0/64 scope link
valid_lft forever preferred_lft forever
3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 90:1b:0e:e8:da:03 brd ff:ff:ff:ff:ff:ff
inet 172.26.5.34/16 brd 172.26.255.255 scope global eno1
valid_lft forever preferred_lft forever
inet6 fe80::921b:eff:fee8:da03/64 scope link
valid_lft forever preferred_lft forever
4: eno2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 90:1b:0e:e8:da:04 brd ff:ff:ff:ff:ff:ff
5: eno4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 90:1b:0e:db:bc:c1 brd ff:ff:ff:ff:ff:ff
inet 172.17.53.18/16 brd 172.17.255.255 scope global eno4
valid_lft forever preferred_lft forever
inet6 fe80::921b:eff:fedb:bcc1/64 scope link
valid_lft forever preferred_lft forever
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]# ip route
default via 172.21.0.250 dev eno3
169.254.0.0/16 dev eno3 scope link metric 1002
169.254.0.0/16 dev eno4 scope link metric 1005
172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18
172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34
172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]# traceroute 172.22.20.31
traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets
1 ames-acc1-agg-1.emcins.com (172.21.0.246) 1.081 ms 1.816 ms 1.832 ms
2 192.168.200.30 (192.168.200.30) 0.639 ms 192.168.200.14 (192.168.200.14) 1.063 ms 1.577 ms
3 192.168.200.101 (192.168.200.101) 3.110 ms ames-sw-wanrtr.emcins.com (192.168.200.97) 3.191 ms 3.277 ms
4 192.168.100.26 (192.168.100.26) 4.146 ms 4.273 ms 4.394 ms
5 192.168.100.98 (192.168.100.98) 1.893 ms 2.364 ms 2.397 ms
6 192.168.100.50 (192.168.100.50) 5.707 ms 192.168.100.33 (192.168.100.33) 5.134 ms 192.168.100.50 (192.168.100.50) 4.105 ms
7 pdputopcomm01.emcins.com (172.22.20.31) 1.359 ms 1.374 ms 1.351 ms
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]# ip route add 172.22.20.31 via 172.21.12.61
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]# traceroute 172.22.20.31
traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets
1 CenteraAmesAN1.emcins.com (172.21.12.61) 6.184 ms 6.475 ms 6.686 ms
2 192.168.90.9 (192.168.90.9) 1.770 ms 1.979 ms 2.189 ms
3 pdputopcomm01.emcins.com (172.22.20.31) 1.405 ms * 1.354 ms
Doug Maxfield | Senior Operating Systems Analyst
EMC Insurance Companies
717 Mulberry St | Des Moines, IA 50265
Tel: 515.345.4507 | Fax: 866.331.1522
Doug.L.Maxfield@EMCIns.com | www.emcins.com
From: Lev Veyde <lveyde@redhat.com>
Sent: Tuesday, February 12, 2019 11:07 AM
To: Doug Maxfield <Doug.L.Maxfield@EMCIns.com>
Cc: users <users@ovirt.org>
Subject: Re: [ovirt-users] Creating a static route
Hi Doug,
In most cases it should not be required, especially as my guess (again it would be easier if you could post the output of the "ip a" and "ip route") is that the eno1 is part of the ovirtmgmt bridge.
What is the output of the "traceroute 172.22.20.31" that you get on the host after you have added the static route?
Thanks in advance,
On Tue, Feb 12, 2019 at 6:58 PM Doug Maxfield <Doug.L.Maxfield@emcins.com> wrote:
Lev,
One other question, since there are multiple enabled interfaces (ovirtmgmt and eno1), do I need to specify an interface for the route add.
Doug Maxfield | Senior Operating Systems Analyst
EMC Insurance Companies
717 Mulberry St | Des Moines, IA 50265
Tel: 515.345.4507 | Fax: 866.331.1522
Doug.L.Maxfield@EMCIns.com | www.emcins.com
From: Lev Veyde <lveyde@redhat.com>
Sent: Tuesday, February 12, 2019 10:50 AM
To: Doug Maxfield <Doug.L.Maxfield@EMCIns.com>
Cc: users <users@ovirt.org>
Subject: Re: [ovirt-users] Creating a static route
Hi Doug,
What do you mean by "static route is refused"?
What is the error message(s) you see?
Can you please try to add the route with the following command:
ip route add 172.22.20.31 via 172.21.12.61
If that doesn't work, then please provide more details, i.e. what is the exact error message(s) you see, the version of your OS and oVirt, output of "ip a" and "ip route" on your host(s), so that it will be easier to help you.
Thanks in advance,
On Tue, Feb 12, 2019 at 6:43 PM Doug Maxfield <Doug.L.Maxfield@emcins.com> wrote:
Lev,
Thanks for your response.
If I attempt to manually add the route using route add:
route add -net 172.22.20.31 netmask 255.255.255.255 gw 172.21.12.61 dev ovirtmgmt
This static route is refused and all traffic is routed over the default gateway.
But if I use a server that doesn’t use the ovirtmgmt interface and set the same static route, the required data is routed correctly over that static route.
Doug Maxfield | Senior Operating Systems Analyst
EMC Insurance Companies
717 Mulberry St | Des Moines, IA 50265
Tel: 515.345.4507 | Fax: 866.331.1522
Doug.L.Maxfield@EMCIns.com | www.emcins.com
From: Lev Veyde <lveyde@redhat.com>
Sent: Tuesday, February 12, 2019 10:34 AM
To: Doug Maxfield <Doug.L.Maxfield@EMCIns.com>
Cc: users <users@ovirt.org>
Subject: Re: [ovirt-users] Creating a static route
Hi Doug,
What is the exact problem you are having while attempting to add a static route on the hosts?
Thanks in advance,
On Tue, Feb 12, 2019 at 5:23 PM <doug.l.maxfield@emcins.com> wrote:
Good Morning,
New to oVirt. We are using this with a backup solution from Commvault. The issue that we are having is that we need to setup a static route for specific data between 2 remote sites. The ovirtmgmt is configured with the correct IP and gateway for the server. We need to route data over a different gateway so that we don't "max out" the default network connection between the 2 sites. Example below
Ovirtmgmt IP - 172.21.5.31
Gateway IP - 172.21.0.250
We need any traffic with a destination of 172.22.20.31(Remote site) to route over this gateway, 172.21.12.61
There are multiple servers in this configuration. Servers that are not using the ovirtmgmt interface for their default, we are able to route the data. The only problem is with attempting to setup a different static route on the ovirtmgmt interfaces.
Thanks in advance for any help!!!
Doug
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-leave@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5OT7DOXX3PMRLIMZBKTHR7/
--
NOTICE: This message (including any attachments) is intended for a specific individual and may contain information that is either confidential or legally protected. If you believe that it has been sent to you in error, please reply to the sender that you have received the message in error, then delete it. If you are not the intended recipient, you are hereby notified that any retention, dissemination, distribution, or copying of this communication is strictly prohibited. Thank you. EMC071856
--
--
--