7:56 p.m.
Hi Fabrice,
Indeed, it does look very similar, but I think it's not quite the same
(but could be wrong).
For starters, the fix by appending the extra clauses in the when: block
in configure.yml did not help me. In my case, it appears the engine is
trying to run the following when setting up the first host:
vdsm-tool ovn-config 10.110.115.21 hv1-mgmt.cds.ligo-la.caltech.edu
Note that this IP and hostname both point to the host that is being added.
But the help info for vdsm-tool shows that another argument is needed
for the IP of the engine itself:
[root@hv1 ~]# vdsm-tool ovn-config
usage:
/usr/bin/vdsm-tool [options] ovn-config IP-central
[tunneling-IP|tunneling-network] host-fqdn
Configures the ovn-controller on the host.
Parameters:
IP-central - the IP of the engine (the host where OVN central is
located)
tunneling-IP - the local IP which is to be used for OVN tunneling
tunneling-network - the vdsm network meant to be used for OVN tunneling
host-fqdn - FQDN that will be set as system-id for OvS (optional)
So either the engine is omitting this argument, or it's misinterpreting
the host's IP address as the engine's IP address. If I manually run
this vdsm-tool command with the extra engine IP address as an argument,
it appears to work:
vdsm-tool ovn-config 10.110.115.20 10.110.115.21
hv1-mgmt.cds.ligo-la.caltech.edu
I'm not fluent enough in ansible to know where I can make the fix to add
this extra argument, unfortunately.
The host is running Rocky Linux 9:
[root@hv1 ~]# rpm -qf /usr/bin/vdsm-tool
vdsm-python-4.50.5.1-1.el9.noarch
--Mike
On 11/8/24 16:14, Fabrice Bacchella wrote:
Your error with vdsm-tool ovn-config look like a lot mine:
https://lists.ovirt.org/archives/list/users@ovirt.org/thread/4P3EHTC7ZYWI...
> Le 8 nov. 2024 à 22:53, Michael Thomas <wart(a)caltech.edu> a écrit :
>
> tl;dr Where can I find a compatible set of host packages and hosted-engine image?
What is the recommended combination to use for new installs?
>
> First, some background:
>
> I've been trying to get a new oVirt 4.5.5 install on Rocky 9 hosts using a hosted
engine. My first few attempts failed because the engine image
(ovirt-engine-appliance-4.5-20231201120201.1.el9) was still based on CentOS8-stream.
Using --ansible-extra-vars=he_pause_before_engine_setup=true I was able to redirect the
repos to vault.centos.org. This helped, but still failed when the engine tried to access
the host:
>
> 2024-11-06 17:05:53,600-0600 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils
ansible_utils._process_output:109 {'msg': 'Host is not up, please check logs,
perhaps also on the engine machine', '_ansible_no_log': False,
'changed': False}
> 2024-11-06 17:05:53,700-0600 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils
ansible_utils._process_output:113 fatal: [localhost]: FAILED! => {"changed":
false, "msg": "Host is not up, please check logs, perhaps also on the
engine machine"}
>
> ...and the logs on the engine throw a NetworkNotFoundError while trying to set up
OVN:
>
> "stdout" : "fatal: [hv1-mgmt.cds.ligo-la.caltech.edu]: FAILED! =>
{\"changed\": true, \"cmd\": [\"vdsm-tool\",
\"ovn-config\", \"10.110.115.21\",
\"hv1-mgmt.cds.ligo-la.caltech.edu\"], \"delta\":
\"0:00:02.413890\", \"end\": \"2024-11-08 14:29:54.215138\",
\"msg\": \"non-zero return code\", \"rc\": 1,
\"start\": \"2024-11-08 14:29:51.801248\", \"stderr\":
\"Traceback (most recent call last):\\n File
\\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\\\", line 117, in
get_network\\n return networks[net_name]\\nKeyError:
'hv1-mgmt.cds.ligo-la.caltech.edu'\\n\\nDuring handling of the above exception,
another exception o
> ccurred:\\n\\nTraceback (most recent call last):\\n File
\\\"/usr/bin/vdsm-tool\\\", line 195, in main\\n return
tool_command[cmd][\\\"command\\\"](*args)\\n File
\\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\\\", line 63, in
ovn_config\\n ip_address = get_ip_addr(get_network(network_caps(), net_name))\\n File
\\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\\\", line 119, in
get_network\\n raise
NetworkNotFoundError(net_name)\\nvdsm.tool.ovn_config.NetworkNotFoundError:
hv1-mgmt.cds.ligo-la.caltech.edu\", \"stderr_lines\": [\"Traceback
(most recent call last):\", \" File \\\"/usr/lib/python3.
> 9/site-packages/vdsm/tool/ovn_config.py\\\", line 117, in get_network\",
\" r
> eturn networks[net_name]\", \"KeyError:
'hv1-mgmt.cds.ligo-la.caltech.edu'\", \"\", \"During handling
of the above exception, another exception occurred:\", \"\",
\"Traceback (most recent call last):\", \" File
\\\"/usr/bin/vdsm-tool\\\", line 195, in main\", \" return
tool_command[cmd][\\\"command\\\"](*args)\", \" File
\\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\\\", line 63, in
ovn_config\", \" ip_address = get_ip_addr(get_network(network_caps(),
net_name))\", \" File
\\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\\\", line 119, in
get_network\", \" raise NetworkNotFoundError(net_name)\",
\"vdsm.tool.ovn_config.NetworkNotFoundError:
hv1-mgmt.cds.ligo-la.caltech.edu\"], \"stdout\": \"\",
\"stdout_lines\": []}",
>
> Ok, so then I think to myself that I should be using a newer engine image. I
installed ovirt-engine-appliance-4.5-20240817071039.1.el9.x86_64.rpm and tried again. But
of course that failed because the host and engine now have incompatible versions:
>
> [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false,
"msg": "The host has
> been set in non_operational status, deployment errors: code 154: Host
hv1-mgmt.cds.ligo-la.caltech.edu is compatible with versions (4.2,4.3,4.4,4.5,4.6,4.7) and
cannot join Cluster CDS which is set to version 4.8., code 1110: Host
hv1-mgmt.cds.ligo-la.caltech.edu's following network(s) are not synchronized with
their Logical Network configuration: ovirtmgmt., code 9000: Failed to verify Power
Management configuration for Host hv1-mgmt.cds.ligo-la.caltech.edu., fix accordingly and
re-deploy."}
>
> --Mike
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/6PSPQCV7NG6...