That did the trick AlesThanks!
On Tue, Mar 2, 2021 at 8:37 AM LS CHENG <email@example.com> wrote:OK, I will give it a try and let you knowThank you very muchOn Tue, Mar 2, 2021 at 8:29 AM Ales Musil <firstname.lastname@example.org> wrote:On Tue, Mar 2, 2021 at 8:25 AM LS CHENG <email@example.com> wrote:Hi AlesThanks for the reply.How do I know a network is "required"? I have three networks defined, ovirtmgmt, VLAN50 and VLAN601, these last I dont think they are a must.ThanksThis can be found and changed in Compute -> Clusters -> $YourCluster -> Logical Networks -> Manage Networks. The check box Require is the one.Also when you are creating a new network, there is a Cluster side menu which let's you choose if the network is required or not (true by default).Hopefully this helps.Best regards,AlesOn Tue, Mar 2, 2021 at 7:33 AM Ales Musil <firstname.lastname@example.org> wrote:On Mon, Mar 1, 2021 at 11:30 PM LS CHENG <email@example.com> wrote:HiI have created a couple of bonding interfaces in the administrator portal, due to some miss configuration I had to break the bond interfaces, what I observe is that after breaking the bonding interfaces the KVM host becomes non operational and it stays in such state unless I add the bonding interfaces back. Anyone have observed this behaviour?ThanksHi,the reason might be that the bond had a required network connected to it. If that is the case, by connecting the required network to proper interfaceshould make the host operational again.Best Regards,Ales_______________________________________________
Users mailing list -- firstname.lastname@example.org
To unsubscribe send an email to email@example.com
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://firstname.lastname@example.org/message/OOIUOIC6S4JMIWIKVPZZRD26BQK4VUDW/