HI Arsene

Just to be clear, can you write down the steps to reproduce ? (the migration procedure . and if possible the state before and after)

Thanks

On Mon, Jun 19, 2017 at 8:34 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:

Hi Jenny,

Thanks for the explanations..

Please find vm.conf attached, it looks like the ovirtmgmt network is defined

Regards,
Arsène


On 06/19/2017 01:46 PM, Evgenia Tokar wrote:
Hi,

It should be in one of the directories on your storage domain:
..../cd1f6775-61e9-4d04-b41c-c64925d5a905/images/<imageId>/<volumeId>

To see which one you can run the following command:

vdsm-client Volume getInfo volumeID=<volumeId> imageID=<imageId> storagedomainID=<storageDomainId> storagepoolID=<storagePoolId>

the storage domain id is: cd1f6775-61e9-4d04-b41c-c64925d5a905
the storage pool id can be found using: vdsm-client StorageDomain getInfo storagedomainID=cd1f6775-61e9-4d04-b41c-c64925d5a905

The volume that has "description": "HostedEngineConfigurationImage" is the one you are looking for.
Untar it and it should contain the original vm.conf which was used to start the hosted engine.

Jenny Tokar


On Mon, Jun 19, 2017 at 12:59 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:

Hi Jenny,

1. I couldn't locate any tar file containing vm.conf, do you know the exact place where it is stored?

2. The ovirtmgmt appears in the network dropdown but I'm not able to change since it complains about locked values.

Thanks a lot for your help.

Regards,
Arsène



On 06/14/2017 01:26 PM, Evgenia Tokar wrote:
Hi Arseny,

Looking at the log the ovf doesn't contain the ovirtmgmt network.

1. Can you provide the original vm.conf file the engine was started with? It is located in a tar archive on your storage domain. 
2. It's uncelar from the screenshot, in the network dropdown do you have an option to add a ovirtmgmt network?

Thanks,
Jenny


On Tue, Jun 13, 2017 at 11:19 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:

Sorry for that, I haven't checked.

I've replaced the log file with a new version which should work i hope.

Many Thanks.

Regards,
Arsène


On 06/12/2017 02:33 PM, Martin Sivak wrote:
I am sorry to say so, but it seems the log archive is corrupted. I
can't open it.

Regards

Martin Sivak

On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind
<arsene.gschwind@unibas.ch> wrote:
Please find the logs here:
https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0

Thanks.

Regards,
Arsène

Hi,

Sorry for this, it seems that the attachment have been detached.

So let's try again

Regards,
Arsène


On 06/12/2017 11:59 AM, Martin Sivak wrote:

Hi,

I would love to help you, but I didn't get the log file..

Regards

Martin Sivak

On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind
<arsene.gschwind@unibas.ch> wrote:

Hi all,

Any chance to get help or a hint to solve my Problem, I have no idea how to
change this configuration since it is not possible using the WebUI.

Thanks a lot.

Regards,
Arsène


On 06/07/2017 11:50 AM, Arsène Gschwind wrote:

Hi all,

Please find attached the agent.log DEBUG and a screenshot from webui

Thanks a lot

Best regards,

Arsène


On 06/07/2017 11:27 AM, Martin Sivak wrote:

Hi all,

Yanir is right, the local vm.conf is just a cache of what was
retrieved from the engine.

I might be interesting to check what the configuration of the engine
VM shows when edited using the webadmin. Or enable debug logging [1]
for hosted engine and add the OVF dump we send there now and then (the
xml representation of the VM).

[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the
level for root logger to DEBUG

Best regards

Martin Sivak

On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <yquinn@redhat.com> wrote:

If im not mistaken the values of vm.conf are repopulated from the database ,
but i wouldn't recommend meddling with DB data.
maybe the network device wasn't set properly during the hosted engine setup
?

On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <arsene.gschwind@unibas.ch>
wrote:

Hi,

Any chance to get a hint how to change the vm.conf file so it will not be
overwritten constantly?

Thanks a lot.

Arsène


On 06/06/2017 09:50 AM, Arsène Gschwind wrote:

Hi,

I've migrated our oVirt engine to hosted-engine located on a FC storage
LUN, so far so good.
For some reason I'm not able to start the hosted-engine VM, after digging
in the log files i could figured out the reason. The Network device was set
to "None" as follow:

devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}

I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new
and set the nic device to ovirtmgnt, the I could start the hosted-engine
using :
hosted-engine --vm-start
--vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new

The nic  device line in vm.conf.new looks like:

devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}

I tried to find out a way to change this setting on vm.conf but it is
constantly rewritten, even when using the webui is say's:
HostedEngine:

There was an attempt to change Hosted Engine VM values that are locked.

Is there a way to modify/correct the hosted-engine vm.conf file so it will
stay and not be overwritten?

Thanks a lot for any hint/help

rgds,
arsène

--

Arsène Gschwind
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 |  CH-4056 Basel  |  Switzerland
Tel. +41 79 449 25 63  |  http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11



_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


--

Arsène Gschwind
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 |  CH-4056 Basel  |  Switzerland
Tel. +41 79 449 25 63  |  http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11


_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


--

Arsène Gschwind
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 |  CH-4056 Basel  |  Switzerland
Tel. +41 79 449 25 63  |  http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11



_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


--

Arsène Gschwind
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 |  CH-4056 Basel  |  Switzerland
Tel. +41 79 449 25 63  |  http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11


_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


--

Arsène Gschwind
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 |  CH-4056 Basel  |  Switzerland
Tel. +41 79 449 25 63  |  http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11

--

Arsène Gschwind    
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 |  CH-4056 Basel  |  Switzerland
Tel. +41 79 449 25 63  | 
http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11


_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



--

Arsène Gschwind    
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 |  CH-4056 Basel  |  Switzerland
Tel. +41 79 449 25 63  | 
http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11



--

Arsène Gschwind    
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 |  CH-4056 Basel  |  Switzerland
Tel. +41 79 449 25 63  | 
http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11


_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users