After letting this sit for a few days, does anyone have any ideas as to how to deal with my situation?  Would anyone like me to send the SOS report directly to them?  It's a 9MB file.

If nothing comes up, I'm going to try and sift through the SOS report tonight, but I won't know what I'm trying to find.

Thank you for any and all help.

On Thu, Jun 1, 2017 at 1:15 AM, Sandro Bonazzola <sbonazzo@redhat.com> wrote:


On Thu, Jun 1, 2017 at 6:36 AM, Brendan Hartzell <mrrex4@gmail.com> wrote:
Ran the 4 commands listed above, no errors on the screen.

Started the hosted-engine standard setup from the web-UI.

Using iSCSI for the storage.

Using mostly default options, I got these errors in the web-UI.

 Error creating Volume Group: Failed to initialize physical device: ("[u'/dev/mapper/36589cfc000000de7482638fcfcebbbb4']",)
Failed to execute stage 'Misc configuration': Failed to initialize physical device: ("[u'/dev/mapper/36589cfc000000de7482638fcfcebbbb4']",)
Hosted Engine deployment failed: this system is not reliable, please check the issue,fix and redeploy

I rebuilt my iSCSI (I don't think I cleaned it up from a previous install).
Re-ran the above 4 commands.
Restarted hosted engine standard setup from web-UI.
Install moved past "Connecting Storage Pool" so I believe the above was my fault.

These are the last messages displayed on the web-UI.
 Creating Storage Pool
Connecting Storage Pool
Verifying sanlock lockspace initialization
Creating Image for 'hosted-engine.lockspace' ...
Image for 'hosted-engine.lockspace' created successfully
Creating Image for 'hosted-engine.metadata' ...
Image for 'hosted-engine.metadata' created successfully
Creating VM Image
Extracting disk image from OVF archive (could take a few minutes depending on archive size)
Validating pre-allocated volume size
Uploading volume to data domain (could take a few minutes depending on archive size)

At the host terminal, I got the error "watchdog watchdog0: watchdog did not stop!"
Then the host restarted.

Simone, can you help here?


 

This is as far as I've gotten in previous attempts.

Attaching the hosted-engine-setup log.

The SOS report is 9MB and the ovirt users group will drop the email.

On Wed, May 31, 2017 at 6:59 AM, Sandro Bonazzola <sbonazzo@redhat.com> wrote:


On Wed, May 31, 2017 at 3:10 PM, Brendan Hartzell <mrrex4@gmail.com> wrote:
Now that you have identified the problem, should I run the following commands and send you another SOS?

ovirt-hosted-engine-cleanup
vdsm-tool configure --force
systemctl restart libvirtd
systemctl restart vdsm

Or is there a different plan in mind?

I would have expected someone from virt team to follow up for further investigations :-)
above commands should work.

 

Thank you,

Brendan

On Tue, May 30, 2017 at 11:42 PM, Sandro Bonazzola <sbonazzo@redhat.com> wrote:


On Wed, May 31, 2017 at 4:45 AM, Brendan Hartzell <mrrex4@gmail.com> wrote:
Can you please elaborate about the failure you see here and how are you trying to manually partition the host?

Sure, I will start from the beginning.
- Using: ovirt-node-ng-installer-ovirt-4.1-2017052604.iso
- During installation I setup one of the two interfaces and check the box to automatically use the connection.
- I'm currently providing a host name of node-1.test.net until I have a successful process.
- I configure date and time for my timezone and to use an internal NTP server.
- On Installation Destination, I pick my 128GB USB3.0 SanDisk flash drive, check the box that I would like to make additional space, and click done.  In the reclaim disk space window, I click delete all, and then reclaim space.  I go back into the Installation Destination, select that I will configure partitioning, and click done.  The Manual Partitioning window opens, I use the option to automatically create mount points.

In this screen, please change partitioning scheme from LVM to LVM Thin Provisioning: it should solve your following error.


 
  At this point, /boot is 1024MB, /var is 15GB, / is 88.11 GB, and swap is 11.57GB.  I then change / to 23.11 GB, update settings, change /var to 80GB, update settings again, and click done.  I accept the changes and begin installation.


The article does say that you can specify a different directory than /var/tmp, but I don't recall seeing that option.

If the setup detects not enough space in /var/tmp for extracting the appliance it will ask about a different directory.

 

After some time, I get the following error:
There was an error running the kickstart script at line 7.  This is a fatal error and installation will be aborted.  The details of this error are:

[INFO] Trying to create a manageable base from '/'
[ERROR] LVM Thin Provisioning partitioning scheme is required.  For autoinstall via Kickstart with LVM Thin Provisioning check options --thinpool and --grow.  Please consult documentation for details.


^^ this one should be solved by the LVM Thin Provisioning scheme mentioned above..

 

Traceback (most recent call last):
File "/usr/lib64/python2.7/runpy.py", line 162, in _run_module_as_main "__main__", fname, loader, pkg_name)
File "/usr/lib64/python2.7runpy.py", line 72, in _run_code exec code in run_globals
File "/usr/lib/python2.7/site-packages/imgbased/__main__.py", line 51, in <module> CliApplication()
File "/usr/lib/python2.7/site-packages/imgbased/__init__.py", line 82, in CliApplication()
File "/usr/lib/python2.7/site-packages/imgbased/hooks.py", line 120, in emit cb(self.context, *args)
File "/usr/lib/python2.7/site-packages/imgbased/plugins/core.py", line 169, in post_argparse layout.initialize(args.source, args.init_nvr)
File "/usr/lib/python2.7/site-packages/imgbased/plugins/core.py", line 216, in initialize self.app.imgbase.init_layout_from(source, init_nvr)
File "/usr/lib/python2.7/site-packages/imgbased/imgbase.py", line 271, in init_layout_from self.init_tags_on(existing_lv)
File "/usr/lib/python2.7/site-packages/imgbased/imgbase.py", line 243, in init_tags_on pool = lv.thinpool()
File "/usr/lib/python2.7/site-packages/imgbased/lvm.py", line 250, in thinpool raise MissingLvmThinPool() imgbased.lvm.MissingLvmThinPool

At this point, the only option is to exit the installer.

****************************

Being this a new install, please use 4.1. oVirt 4.0 is not supported anymore.

Not a problem.

****************************

Can you please provide hosted engine setup logs or better a full sos report? (sosreport -a)

Again, the process I'm following:
- Using: ovirt-node-ng-installer-ovirt-4.1-2017052604.iso
- During installation I setup one of the two interfaces and check the box to automatically use the connection.
- I'm currently providing a host name of node-1.test.net until I have a successful process.
- I configure date and time for my timezone and to use an internal NTP server.
- On Installation Destination, I pick my 128GB USB3.0 SanDisk flash drive, check the box that I would like to make additional space, and click done. In the reclaim disk space window, I click delete all, and then reclaim space.
- Begin Installation and set a root password.
- Perform a yum update - no packages marked for update (as expected)
- Use vi to update /etc/hosts with a reference for node-1.test.net and engine.test.net
- First attempt at hosted-engine from web-UI
- Setup downloads and installs ovirt-engine-appliance-4.1-20170523.1.el7.centos.noarch.rpm
*Failed to execute stage 'Environment setup': Failed to reconfigure libvirt for VDSM
*Hosted Engine deployment failed
- Attached SOS report
The checksum is: aa56097edc0b63c49caaf1a1fde021bc

At this point, I would run ovirt-hosted-engine-cleanup and I would get further along in the install process.  However, because this is a fresh install, I'm going to leave things here for now so you can review the SOS.

Thanks for the SOS report!
Hosted Engine setup fails on:

2017-05-30 19:24:39 DEBUG otopi.plugins.gr_he_setup.system.vdsmenv plugin.execute:921 execute-output: ('/bin/vdsm-tool', 'configure', '--force') stdout:

Checking configuration status...

Current revision of multipath.conf detected, preserving
lvm is configured for vdsm
libvirt is already configured for vdsm
SUCCESS: ssl configured to true. No conflicts

Running configure...
Reconfiguration of libvirt is done.

2017-05-30 19:24:39 DEBUG otopi.plugins.gr_he_setup.system.vdsmenv plugin.execute:926 execute-output: ('/bin/vdsm-tool', 'configure', '--force') stderr:
Error:  ServiceOperationError: _systemctlStart failed
Job for libvirtd.service failed because the control process exited with error code. See "systemctl status libvirtd.service" and "journalctl -xe" for details.
 
At the same time journalctl shows:

May 30 19:24:39 node-1.test.net libvirtd[20954]: libvirt version: 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem <http://bugs.centos.org>, 2017-03-03-02:09:45, c1bm.rdu2.centos.org)
May 30 19:24:39 node-1.test.net libvirtd[20954]: hostname: node-1.test.net
May 30 19:24:39 node-1.test.net libvirtd[20954]: The server certificate /etc/pki/vdsm/certs/vdsmcert.pem is not yet active
May 30 19:24:39 node-1.test.net systemd[1]: libvirtd.service: main process exited, code=exited, status=6/NOTCONFIGURED
May 30 19:24:39 node-1.test.net systemd[1]: Failed to start Virtualization daemon.
May 30 19:24:39 node-1.test.net systemd[1]: Unit libvirtd.service entered failed state.
May 30 19:24:39 node-1.test.net systemd[1]: libvirtd.service failed.
May 30 19:24:39 node-1.test.net systemd[1]: libvirtd.service holdoff time over, scheduling restart.







 

****************************

I'd like to understand the issues you faced before suggesting to restart from scratch.

Too late... I did two re-installs to get a more accurate account of my install process for above.

****************************

Thank you for your help!

Brendan

On Tue, May 30, 2017 at 12:17 AM, Sandro Bonazzola <sbonazzo@redhat.com> wrote:


On Tue, May 30, 2017 at 6:49 AM, Brendan Hartzell <mrrex4@gmail.com> wrote:
oVirt users list,

Long story short, I've been spending weeks on this project for my home lab with no success.

I would like to successfully install two nodes that host a highly available engine with an iSCSI storage back-end.

I have read through most, if not all, of the guides on ovirt.org with no substantial help.

Successfully, I have done the following:
Install oVirt Engine on a bare metal system, added a node, and started exploring - not desired.
Install oVirt Node 4.0.6 on a bare metal system - fails if partitions are not done automatically.
Install oVirt Node 4.1.2 on a bare metal system - fails if partitions are not done automatically.

Can you please elaborate about the failure you see here and how are you trying to manually partition the host?



 

My process after installing a Node:
Run a yum update - just to be sure, but I am using latest iso images from downloads section.
Edit /etc/hosts for local name resolution - the goal is to host DNS as a virtual machine, eventually.
On 4.1 if I install ovirt-engine-appliance from yum, it does simplify one step in the hosted engine setup.  If I do this on 4.0 it discards the image and uses the default.

Being this a new install, please use 4.1. oVirt 4.0 is not supported anymore.

 
On 4.1 the hosted engine setup fails immediately unless I run the hosted engine cleanup from the shell.

Can you please provide hosted engine setup logs or better a full sos report? (sosreport -a)


 
  If I do this, I can typically get to the point of installing.

When I do get to the installation phase, I get to a point just after extracting the OVA that I get a message on the shell saying something about the watchdog running the whole time and then the node reboots.

I found one email thread that sounded like my issue and suggested the following commands:
vdsm-tool configure --force
systemctl restart libvirtd
systemctl restart vdsmd

Unfortunately, these commands did not help my situation like the other individual.

What log file would everyone like to see first?  Given that I still consider myself relatively new to Linux, please identify the path for the log file requested.

See above
 

Also, because I plan on performing a clean install for this thread using my process from above (I'm not expecting my outcome to be any different), are there any tips and tricks that might result in a success?

I'd like to understand the issues you faced before suggesting to restart from scratch.
Adding some people who may help as well.

 

Thank you for any and all help,
Brendan

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users




--

SANDRO BONAZZOLA

ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D

Red Hat EMEA





--

SANDRO BONAZZOLA

ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D

Red Hat EMEA





--

SANDRO BONAZZOLA

ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D

Red Hat EMEA





--

SANDRO BONAZZOLA

ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D

Red Hat EMEA