On 2019-04-14 23:22, Leo David wrote:
Hi,Thank you Alex, I was looking for some optimisation settings as well, since I am pretty much in the same boat, using ssd based replicate-distributed volumes across 12 hosts.Could anyone else (maybe even from from ovirt or rhev team) validate these settings or add some other tweaks as well, so we can use them as standard ?Thank you very much again !
On Mon, Apr 15, 2019, 05:56 Alex McWhirter <alex@triadic.us> wrote:_______________________________________________On 2019-04-14 20:27, Jim Kusznir wrote:
Hi all:
I've had I/O performance problems pretty much since the beginning of using oVirt. I've applied several upgrades as time went on, but strangely, none of them have alleviated the problem. VM disk I/O is still very slow to the point that running VMs is often painful; it notably affects nearly all my VMs, and makes me leary of starting any more. I'm currently running 12 VMs and the hosted engine on the stack.My configuration started out with 1Gbps networking and hyperconverged gluster running on a single SSD on each node. It worked, but I/O was painfully slow. I also started running out of space, so I added an SSHD on each node, created another gluster volume, and moved VMs over to it. I also ran that on a dedicated 1Gbps network. I had recurring disk failures (seems that disks only lasted about 3-6 months; I warrantied all three at least once, and some twice before giving up). I suspect the Dell PERC 6/i was partly to blame; the raid card refused to see/acknowledge the disk, but plugging it into a normal PC showed no signs of problems. In any case, performance on that storage was notably bad, even though the gig-e interface was rarely taxed.I put in 10Gbps ethernet and moved all the storage on that none the less, as several people here said that 1Gbps just wasn't fast enough. Some aspects improved a bit, but disk I/O is still slow. And I was still having problems with the SSHD data gluster volume eating disks, so I bought a dedicated NAS server (supermicro 12 disk dedicated FreeNAS NFS storage system on 10Gbps ethernet). Set that up. I found that it was actually FASTER than the SSD-based gluster volume, but still slow. Lately its been getting slower, too...Don't know why. The FreeNAS server reports network loads around 4MB/s on its 10Gbe interface, so its not network constrained. At 4MB/s, I'd sure hope the 12 spindle SAS interface wasn't constrained either..... (and disk I/O operations on the NAS itself complete much faster).So, running a test on my NAS against an ISO file I haven't accessed in months:# dd if=en_windows_server_2008_r2_standard_enterprise_datacenter_and_web_x64_dvd_x15-59754.iso of=/dev/null bs=1024k count=500500+0 records in500+0 records out524288000 bytes transferred in 2.459501 secs (213168465 bytes/sec)Running it on one of my hosts:root@unifi:/home/kusznir# time dd if=/dev/sda of=/dev/null bs=1024k count=500500+0 records in500+0 records out524288000 bytes (524 MB, 500 MiB) copied, 7.21337 s, 72.7 MB/s(I don't know if this is a true apples to apples comparison, as I don't have a large file inside this VM's image). Even this is faster than I often see.I have a VoIP Phone server running as a VM. Voicemail and other recordings usually fail due to IO issues opening and writing the files. Often, the first 4 or so seconds of the recording is missed; sometimes the entire thing just fails. I didn't use to have this problem, but its definately been getting worse. I finally bit the bullet and ordered a physical server dedicated for my VoIP System...But I still want to figure out why I'm having all these IO problems. I read on the list of people running 30+ VMs...I feel that my IO can't take any more VMs with any semblance of reliability. We have a Quickbooks server on here too (windows), and the performance is abysmal; my CPA is charging me extra because of all the lost staff time waiting on the system to respond and generate reports.....I'm at my whits end...I started with gluster on SSD with 1Gbps network, migrated to 10Gbps network, and now to dedicated high performance NAS box over NFS, and still have performance issues.....I don't know how to troubleshoot the issue any further, but I've never had these kinds of issues when I was playing with other VM technologies. I'd like to get to the point where I can resell virtual servers to customers, but I can't do so with my current performance levels.I'd greatly appreciate help troubleshooting this further.--Jim
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-leave@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZR64VABNT2SGKLNP3XNTHCGFZXSOJAQF/Been working on optimizing the same. This is where im at currently.
Gluster volume settings.
diagnostics.count-fop-hits: on
diagnostics.latency-measurement: on
performance.write-behind-window-size: 64MB
performance.flush-behind: on
performance.stat-prefetch: on
server.event-threads: 4
client.event-threads: 8
performance.io-thread-count: 32
network.ping-timeout: 30
cluster.granular-entry-heal: enable
performance.strict-o-direct: on
storage.owner-gid: 36
storage.owner-uid: 36
features.shard: on
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 8
cluster.locking-scheme: granular
cluster.data-self-heal-algorithm: full
cluster.server-quorum-type: server
cluster.quorum-type: auto
cluster.eager-lock: enable
network.remote-dio: off
performance.low-prio-threads: 32
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
auth.allow: *
user.cifs: off
transport.address-family: inet
nfs.disable: off
performance.client-io-threads: onsysctl options
net.core.rmem_max = 134217728
net.core.wmem_max = 134217728
net.ipv4.tcp_rmem = 4096 87380 134217728
net.ipv4.tcp_wmem = 4096 65536 134217728
net.core.netdev_max_backlog = 300000
net.ipv4.tcp_moderate_rcvbuf =1
net.ipv4.tcp_no_metrics_save = 1
net.ipv4.tcp_congestion_control=htcpcustom /sbin/ifup-local file, Storage is the bridge name, which == ens3f0/1 in bond2
#!/bin/bash
case "$1" in
Storage)
/sbin/ethtool -K ens3f0 tx off rx off tso off gso off
/sbin/ethtool -K ens3f1 tx off rx off tso off gso off
/sbin/ip link set dev ens3f0 txqueuelen 10000
/sbin/ip link set dev ens3f1 txqueuelen 10000
/sbin/ip link set dev bond2 txqueuelen 10000
/sbin/ip link set dev Storage txqueuelen 10000
;;
*)
;;
esac
exit 0i still have some latency issues, but my writes are up to 264MB/S sequential on HDD's
output of crystal diskmark on windows 10 vm
Sequential Read (Q= 32,T= 1) : 688.536 MB/s
Sequential Write (Q= 32,T= 1) : 264.254 MB/s
Random Read 4KiB (Q= 8,T= 8) : 176.069 MB/s [ 42985.6 IOPS]
Random Write 4KiB (Q= 8,T= 8) : 63.217 MB/s [ 15433.8 IOPS]
Random Read 4KiB (Q= 32,T= 1) : 159.598 MB/s [ 38964.4 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 54.212 MB/s [ 13235.4 IOPS]
Random Read 4KiB (Q= 1,T= 1) : 3.488 MB/s [ 851.6 IOPS]
Random Write 4KiB (Q= 1,T= 1) : 3.006 MB/s [ 733.9 IOPS]also enabling libgfapi on the engine was the best performance option i ever tweaked, easily doubled reads / writes
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-leave@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/S7I3PQVERQZT6Q6CXDWJEWCY2ELEGRHY/Also with all of that said, i've mostly solved the rest of my issues by enabling performance.read-ahead on the gluster volume. I am saturating my 10G network, which translates to 700MB/s reads, 350MB/s writes (replica 2)
just make sure your local read ahead settings on the bricks are sane, I.E "blockdev --getra /dev/sdx", mine is 8192