Hi Antoni,
The problem is LRO activated on bnx2x driver.
After the reboot the LRO comes activated, after reconfiguring the bond the LRO is deactivated.
So i created /etc/modprobe.d/bnx2x.conf with: options bnx2x disable_tpa=1
and everythink is ok now after reboot.
There was a previous bug open for RHEL5 about this problem https://bugzilla.redhat.com/show_bug.cgi?id=518531 should i reopen this for RHEL6?
This problem only happens when bnx2x is used with bonds... should this be considered as a bug?
Best regards,
Ricardo Esteves.
-----Original Message-----
From: Antoni Segura Puimedon <asegurap@redhat.com>
To: Users@ovirt.org
Subject: Re: [Users] Bonding - VMs Network performance problem
Date: Tue, 30 Jul 2013 12:23:36 -0400 (EDT)
Hi Ricardo,
Thanks a lot for the extra and very relevant info. Could you please create a
bug in bugzilla so we can better track it?
Best,
Toni
----- Original Message -----
> From: "Ricardo Esteves" gmail.com>
> To: Users@ovirt.org
> Sent: Tuesday, July 30, 2013 5:58:44 PM
> Subject: Re: [Users] Bonding - VMs Network performance problem
>
> Hi,
>
> I also noticed this on /var/log/messages while the problem was happening (i
> was downloading a file in the VM from the web):
>
> Jul 30 16:55:55 blade5 kernel: bond0.1: received packets cannot be forwarded
> while LRO is enabled
> Jul 30 16:55:56 blade5 kernel: bond0.1: received packets cannot be forwarded
> while LRO is enabled
> Jul 30 16:55:56 blade5 kernel: bond0.1: received packets cannot be forwarded
> while LRO is enabled
> Jul 30 16:55:56 blade5 kernel: bond0.1: received packets cannot be forwarded
> while LRO is enabled
> Jul 30 16:55:56 blade5 kernel: bond0.1: received packets cannot be forwarded
> while LRO is enabled
> Jul 30 16:55:56 blade5 kernel: bond0.1: received packets cannot be forwarded
> while LRO is enabled
> Jul 30 16:55:57 blade5 kernel: bond0.1: received packets cannot be forwarded
> while LRO is enabled
> Jul 30 16:55:57 blade5 kernel: bond0.1: received packets cannot be forwarded
> while LRO is enabled
> Jul 30 16:55:57 blade5 kernel: bond0.1: received packets cannot be forwarded
> while LRO is enabled
> Jul 30 16:55:57 blade5 kernel: bond0.1: received packets cannot be forwarded
> while LRO is enabled
>
> Best regards,
> Ricardo Esteves.
>
> -----Original Message-----
> From : Ricardo Esteves < maverick.pt@gmail.com >
> To : Users@ovirt.org
> Cc : Itamar Heim < iheim@redhat.com >, Mike Kolesnik < mkolesni@redhat.com >
> Subject : Re: [Users] Bonding - VMs Network performance problem
> Date : Tue, 30 Jul 2013 15:10:24 +0100
>
> Good afternoon,
>
> In attachment the result of vdsClient -s 0 getVdsCaps during problem and
> after problem resolved.
>
> Best regards,
> Ricardo Esteves.
>
> -----Original Message-----
> From : Mike Kolesnik < mkolesni@redhat.com >
> To : Ricardo Esteves < maverick.pt@gmail.com >
> Cc : Users@ovirt.org , Itamar Heim < iheim@redhat.com >
> Subject : Re: [Users] Bonding - VMs Network performance problem
> Date : Tue, 16 Jul 2013 10:01:31 -0400 (EDT)
>
> ----- Original Message ----- > On 07/16/2013 04:09 PM, Ricardo Esteves wrote:
> > > Hi, > > > > Not really. > > > > I can resolve temporally, unconfiguring
> the bond and then configure it > > again. > > > > But when i reboot the
> server the problem comes back. > > can you compare the network configuration
> before and after you change it > the setup network? Perhaps you can send
> pastebin of a 'vdsClient 0 getVdsCaps' (or 'vdsClient -s 0 getVdsCaps' if
> the first doesn't work)
> from the host when the bond is slow, and one after you break and create it
> again?
>
> if you don't have vdsClient command you can 'yum install vdsm-cli' and it
> should be available. > > > > > > > -----Original Message----- > > *From*:
> Itamar Heim < iheim@redhat.com > > <
> mailto:Itamar%20Heim%20%3ciheim@redhat.com %3e>> > > *To*: Ricardo Esteves <
> maverick.pt@gmail.com > > <
> mailto:Ricardo%20Esteves%20%3cmaverick.pt@gmail.com %3e>> > > *Subject*: Re:
> [Users] Bonding - VMs Network performance problem > > *Date*: Tue, 16 Jul
> 2013 15:38:10 +0300 > > > > On 07/01/2013 03:12 PM, Ricardo Esteves wrote: >
> >> Hi, > >> > >> Yes, i'm still experiencing this problem, in fact just
> happened a few > >> minutes ago. :) > >> > >> All MTUs are 1500. > > > > was
> this resolved? > > > >> > >> -----Original Message----- > >> *From*: Livnat
> Peer < lpeer@redhat.com < mailto:lpeer@redhat.com > > >> <
> mailto:Livnat%20Peer%20%3clpeer@redhat.com %3e>> > >> *To*: Ricardo Esteves
> < maverick.pt@gmail.com > >> < mailto:maverick.pt@gmail.com > > >> <
> mailto:Ricardo%20Esteves%20%3cmaverick.pt@gmail.com %3e>> > >> *Subject*:
> Re: [Users] Bonding - VMs Network performance problem > >> *Date*: Sun, 23
> Jun 2013 11:33:58 +0300 > >> > >> Hi Ricardo, > >> Are you still
> experiencing the problem described below? > >> Are you configuring MTU (to
> something other than default or 1500) for > >> one of the networks on the
> bond? > >> > >> Thanks, Livnat > >> > >> On 06/18/2013 05:36 PM, Ricardo
> Esteves wrote: > >>> Good afternoon, > >>> > >>> Yes, the "Save network
> configuration" is checked, configurations are > >>> persistent across boots.
> > >>> > >>> The problem is not the persistence of the configurations, the
> problem is > >>> that after a reboot the network performance on the VMs is
> very bad, and > >>> to fix it i need to remove the bonding and add it again.
> > >>> > >>> In attachment, the screenshots of my network configuration. >
> >>> > >>> Best regards, > >>> Ricardo Esteves. > >>> > >>> -----Original
> Message----- > >>> *From*: Mike Kolesnik < mkolesni@redhat.com <
> mailto:mkolesni@redhat.com > > >>> < mailto:mkolesni@redhat.com > > >>> <
> mailto:Mike%20Kolesnik%20%3cmkolesni@redhat.com %3e>> > >>> *To*: Ricardo
> Esteves < maverick.pt@gmail.com > >>> < mailto:maverick.pt@gmail.com > <
> mailto:maverick.pt@gmail.com > > >>> <
> mailto:Ricardo%20Esteves%20%3cmaverick.pt@gmail.com %3e>> > >>> *Cc*:
> Users@ovirt.org < mailto:Users@ovirt.org > < mailto:Users@ovirt.org > >
> >>> < mailto:Users@ovirt.org > > >>> *Subject*: Re: [Users] Bonding - VMs
> Network performance problem > >>> *Date*: Sun, 26 May 2013 04:57:43 -0400
> (EDT) > >>> > >>> > >>> > >>>
> ------------------------------------------------------------------------ >
> >>> > >>> > >>> Hi, > >>> > >>> I've got ovirt installed on 2 HP
> BL460c G6 blades, and my VMs have > >>> very poor network performance
> (around 7,01K/s). > >>> > >>> On the servers itselfs there is no
> problem, i can download a file > >>> with wget at around 99 M/s. > >>> >
> >>> Then i go to ovirt network configuration remove the bonding and then
> > >>> make the bonding again and the problem gets fixed (i have to do
> this > >>> everytime i reboot my blades). > >>> > >>> Have you tried to
> check the "Save network configuration" check box, or > >>> clicking the
> button from the host's NICs sub-tab? > >>> > >>> This should persist the
> configuration that you set on the host across > >>> reboots.. > >>> > >>> >
> >>> SERVER' s Software: > >>> CentOS 6.4 (64 bits) -
> 2.6.32-358.6.2.el6.x86_64 > >>> Ovirt EL6 official rpms. > >>> > >>>
> Anyone experienced this kind of problems? > >>> > >>> Best regards,
> > >>> Ricardo Esteves. > >>> > >>> > >>> > >>>
> _______________________________________________ > >>> Users mailing
> list > >>> Users@ovirt.org < mailto:Users@ovirt.org > <
> mailto:Users@ovirt.org > > >>> http://lists.ovirt.org/mailman/listinfo/users
> > >>> > >>> > >>> > >>> > >>> > >>>
> _______________________________________________ > >>> Users mailing list >
> >>> Users@ovirt.org < mailto:Users@ovirt.org > < mailto:Users@ovirt.org >
> > >>> http://lists.ovirt.org/mailman/listinfo/users > >>> > >> > >> > >> >
> >> _______________________________________________ > >> Users mailing list >
> >> Users@ovirt.org < mailto:Users@ovirt.org > > >>
> http://lists.ovirt.org/mailman/listinfo/users > >> > > > >
> _______________________________________________ > Users mailing list >
> Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >
>
> _______________________________________________
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users