2014-04-11 14:08 GMT+02:00 Dafna Ron <dron@redhat.com>:

James, Please answer the user's list as well as to me so that other people can participate as well :)

Oups ... I will do that ..

did you try to press the "confirm host has been rebooted" (right click)

Yes but same problem. node1 cannot be in maintenance mode.

node1 is SPM . I will make node1 release the SPM ressource.

On 04/11/2014 12:41 PM, James James wrote:

2014-04-11 13:16 GMT+02:00 Dafna Ron <dron@redhat.com <mailto:dron@redhat.com>>:

what is the error message you get when you try to put the host in
maintenance?

I have this message :

Error while executing action: Cannot switch Host to Maintenance mode.
Host is Storage Pool Manager and is in Non Responsive state.
- If power management is configured, engine will try to fence the host automatically.
- Otherwise, either bring the node back up, or release the SPM resource.
To do so, verify that the node is really down by right clicking on the host and confirm that the node was shutdown manually.

are there any running vm's reported?

No there is no VM running on this host

Try to press the "confirm host has been rebooted" button and than
see if you can put the host in maintenance.

If that fails, select the host, in the general tab you will get
the re-install link.

I am running ovirt 3.4.0-1. I down't know where is the re-install link but I can't see it.

try to re-install, when install fails the host should change
status to failed installation.

On 04/11/2014 12:09 PM, James James wrote:

No, I can't ....

2014-04-11 12:12 GMT+02:00 Dafna Ron <dron@redhat.com
<mailto:dron@redhat.com> <mailto:dron@redhat.com

<mailto:dron@redhat.com>>>:

can you put the host in maintenance?

On 04/11/2014 10:43 AM, James James wrote:

I can't delete the old node because it is in Non
Responsive
state. The remove button is stil blank .

In the engine.log I've got this log :
2014-04-11 11:40:45,911 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
(DefaultQuartzScheduler_Worker-88) Command
GetCapabilitiesVDSCommand(HostName = node1, HostId =
36fb6df3-c2c2-4133-86ac-fe50b99ee2e3, vds=Host[node1])
execution failed. Exception: VDSNetworkException:
sun.security.provider.certpath.SunCertPathBuilderException:
unable to find valid certification path to requested
target
2014-04-11 11:40:48,943 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
(DefaultQuartzScheduler_Worker-12) Command
GetCapabilitiesVDSCommand(HostName = node1, HostId =
36fb6df3-c2c2-4133-86ac-fe50b99ee2e3, vds=Host[node1])
execution failed. Exception: VDSNetworkException:
sun.security.provider.certpath.SunCertPathBuilderException:
unable to find valid certification path to requested
target

2014-04-11 11:06 GMT+02:00 Alon Bar-Lev
<alonbl@redhat.com <mailto:alonbl@redhat.com>
<mailto:alonbl@redhat.com <mailto:alonbl@redhat.com>>
<mailto:alonbl@redhat.com <mailto:alonbl@redhat.com>

<mailto:alonbl@redhat.com <mailto:alonbl@redhat.com>>>>:

----- Original Message -----
> From: "James James" <jreg2k@gmail.com
<mailto:jreg2k@gmail.com>
<mailto:jreg2k@gmail.com <mailto:jreg2k@gmail.com>>
<mailto:jreg2k@gmail.com <mailto:jreg2k@gmail.com>
<mailto:jreg2k@gmail.com <mailto:jreg2k@gmail.com>>>>
> To: dron@redhat.com <mailto:dron@redhat.com>
<mailto:dron@redhat.com <mailto:dron@redhat.com>>
<mailto:dron@redhat.com <mailto:dron@redhat.com>
<mailto:dron@redhat.com <mailto:dron@redhat.com>>>
> Cc: "users" <users@ovirt.org
<mailto:users@ovirt.org> <mailto:users@ovirt.org
<mailto:users@ovirt.org>>
<mailto:users@ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>>>
> Sent: Friday, April 11, 2014 12:04:23 PM
> Subject: Re: [ovirt-users] Re-add a node
>
> The engine is the same but the node (node1) has been
reinstalled ...

So you need to re-add it to the engine.
Delete the old node at engine side and use the
node user
interface
to add it to the engine.

>
>
> 2014-04-11 10:48 GMT+02:00 James James <
jreg2k@gmail.com <mailto:jreg2k@gmail.com>
<mailto:jreg2k@gmail.com <mailto:jreg2k@gmail.com>>
<mailto:jreg2k@gmail.com <mailto:jreg2k@gmail.com>
<mailto:jreg2k@gmail.com <mailto:jreg2k@gmail.com>>> > :

>
>
>
> the log contains information about the first node1
installation ....
>
> http://pastebin.com/mZSb2wmD
>
>
> 2014-04-11 10:12 GMT+02:00 Dafna Ron <
dron@redhat.com <mailto:dron@redhat.com>
<mailto:dron@redhat.com <mailto:dron@redhat.com>>
<mailto:dron@redhat.com <mailto:dron@redhat.com>
<mailto:dron@redhat.com <mailto:dron@redhat.com>>> > :

>
>
>
> please add the host-deploy log from
/var/log/ovirt-engine/host-
deploy/
>
>
> On 04/11/2014 12:11 AM, James James wrote:
>
>
>
> Hi,
> I don know i the subject is explicit enough but
I have a
problem
and I hope
> to find some help here.
>
> I had two hosts in my cluster (node1 and node2).
I had to
reinstall node1 due
> to some networks problem. In the engine, node1
appears
now "Not
reponsive"
> and I can't remove it from the engine ui.
>
> Now node1 is back and I want to add it in the
cluster but I
can't. I've got
> this error (vdsm.log) :
> BindingXMLRPC::ERROR::2014-04- 11 01
<tel:2014-04-%2011%2001>
<tel:2014-04-%2011%2001>
<tel:2014-04-%2011%2001>:04:42,622::BindingXMLRPC::

> 81::vds::(threaded_start) xml-rpc handler exception
> Traceback (most recent call last):
> File "/usr/share/vdsm/ BindingXMLRPC.py", line
77, in
threaded_start
> self.server.handle_request()
> File "/usr/lib64/python2.6/ SocketServer.py",
line 278, in
handle_request
> self._handle_request_noblock()
> File "/usr/lib64/python2.6/ SocketServer.py",
line 288, in
> _handle_request_noblock
> request, client_address = self.get_request()
> File "/usr/lib64/python2.6/ SocketServer.py",
line 456, in
get_request
> return self.socket.accept()
> File "/usr/lib64/python2.6/site- packages/vdsm/
SecureXMLRPCServer.py", line
> 136, in accept
> raise SSL.SSLError("%s, client %s" % (e,
address[0]))
> SSLError: sslv3 alert certificate unknown, client
192.168.1.100
>
> 192.168.1.100 is the engine's address
>
> Can somebody help me ?
>
>
>
> ______________________________ _________________
> Users mailing list
> Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>

> http://lists.ovirt.org/ mailman/listinfo/users
>
>
> --
> Dafna Ron
>
>
>
> _______________________________________________
> Users mailing list
> Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>

> http://lists.ovirt.org/mailman/listinfo/users
>

-- Dafna Ron

-- Dafna Ron

--
Dafna Ron