______________________________Ovirt Community,
First off: thank you – these emails have helped me to get Ovirt running. I barely know what I am doing but learning quickly.
I am trying to do a network separation and confusing myself. I have two physical networks (10.10.x.x/16 and 192.168.1.x/24) my ovirt management is bridged on 10.10.x.x. My (currently single) Hosts have at least one physical NIC connecting to each network. I am trying to get to the point there the VMs are on the 192.168.1.x network and the 10.10.x.x network. The goal is to join the VMs to a AD domain on 192.168.1.x but keep access as limited as possible to the 10.10.x.x network.
I’ve been on a googlethon over the past few days and still don’t understand the best practice – or even a working practice – to accomplish this goal.
Peter Harman – Systems and Safety Cordinator | Homeyer Precision Manufacturing
16051 State Hwy 47, Marthasville, MO 63357| E pharman@homeyertool.com | P 636.433.2244 | F 636.433.5257
_________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-leave@ovirt.org
Hi Peter,
if I understand this correctly you can achieve that by marking the 192.168.1.x network as VM network via UI: Networks -> Desired network -> Edit -> Check VM network and save. Then in any VM that you want to be on this network set NICs VNIC profile that is connected to 192.168.1.x via UI: Virtual Machines -> Desired VM -> Network Interfaces -> nicX -> Edit -> Profile -> Select profile that is connected to 192.168.1.x -> Save. If the VM is up and running you need to first unplug the interface save it and then change profile and plug it in again. Hopefully this helps.
Ales
