You could always go expand the volume after deployment by adding more disks to the logical volume it creates.

On Wed, Sep 12, 2018, 11:38 PM Jayme <jaymef@gmail.com> wrote:
Eduardo, there is one thing you should be aware of.  The jbod disks aren't all pooled together to create one large storage domain. I had to spread my data domains over the devices such as a data domain on /dev/SDA and data2 on sdb etc not a big problem with only two disks per server but with ten it could get ugly 

On Thu, Sep 13, 2018, 4:52 AM Eduardo Mayoral, <emayoral@arsys.es> wrote:

Thanks for your answers!

Yes, my plan is a replica-3 too. The cluster will be bigger, though, 4 or 5 nodes with 10 disks each -> 40 to 50 bricks.

Again, thanks for your help.

--
Eduardo Mayoral.

On 12/09/18 20:54, Jayme wrote:
Should also note that I am using replica 3 configuration with no arbiter for extra redundancy.

On Wed, Sep 12, 2018 at 3:53 PM Jayme <jaymef@gmail.com> wrote:
I am running a three server oVirt hyperconverged setup with JBOD disks.  Two 2TB SSDs in JBOD per server.  The configuration is working very well for me so far.



On Wed, Sep 12, 2018 at 2:36 PM Donny Davis <donny@fortnebula.com> wrote:
JBOD is on the drop down when you do the setup for the volumes

On Wed, Sep 12, 2018, 1:50 AM Eduardo Mayoral <emayoral@arsys.es> wrote:
Hi!

  I am thinking about using some spare servers I have for a
hyperconverged oVirt + gluster. Only problem with these servers is that
the RAID card is not specially good, so I am considering using gluster
in a JBOD configuration. JBOD is supported for recent versions of
gluster, but I am not sure if this configuration is supported by oVirt,
or if there are any special considerations I should take into account.

    Anyone running oVirt + gluster with JBOD who can comment on this?

    Thanks!

--

Eduardo Mayoral.

_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-leave@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2DTIGZ5VOKG52ZHCZTTCHGPT5NFKYSTP/
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-leave@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YGQUVKGP3S34JRB4CPWIRXZ2YDR27NFQ/