----- Original Message -----
> From: "Alex Leonhardt" <alex.tuxx@gmail.com>
> To: "Antoni Segura Puimedon" <asegurap@redhat.com>
> Cc: "oVirt Mailing List" <users@ovirt.org>

> Sent: Wednesday, March 6, 2013 5:16:36 PM
> Subject: Re: [Users] Fwd: Adding a bond.vlantag to ovirt-node
>
>
>
> I've setup the same bond config on my test machine, and this is what
> I get :
>
>
> # vdsClient -s 0 addNetwork bridge=br2 bridged=true bond=bond0.113
> nics=eth0,eth1
> 'bond0.113' is not a valid bonding device name

It should be:

vdsClient -s 0 addNetwork bridge=br2 bridged=true bond=bond0 vlan=113 nics=eth0,eth1

>
>
>
> Alex
>
>
>
>
>
> On 6 March 2013 13:05, Alex Leonhardt < alex.tuxx@gmail.com > wrote:
>
>
>
>
>
> Thanks Antoni,
>
> I'll try the above when it's a bit quieter (evening). Also, good to
> know that if you put the host in maint that it will pick the changes
> up :) ...
>
>
> IMO - the engine should poll the HVs at least once an hour / day to
> check if any hardware relevant to it has changed ... :)
>
>
>
> Thanks again, I'll update with the result(s) later today.
>
> Alex
>
>
>
>
>
>
>
> On 6 March 2013 13:02, Antoni Segura Puimedon < asegurap@redhat.com >
> wrote:
>
>
> Forgot to cc users list.
>
>
>
> ----- Forwarded Message -----
> > From: "Antoni Segura Puimedon" < asegurap@redhat.com >
> > To: "Alex Leonhardt" < alex.tuxx@gmail.com >
> > Sent: Wednesday, March 6, 2013 2:00:54 PM
> > Subject: Re: [Users] Adding a bond.vlantag to ovirt-node
> >
> >
> >
> > ----- Original Message -----
> > > From: "Alex Leonhardt" < alex.tuxx@gmail.com >
> > > To: "Antoni Segura Puimedon" < asegurap@redhat.com >
> > > Cc: "oVirt Mailing List" < users@ovirt.org >
> > > Sent: Wednesday, March 6, 2013 1:52:36 PM
> > > Subject: Re: [Users] Adding a bond.vlantag to ovirt-node
> > >
> > >
> > >
> > > Hmmm, nothing is coming up in the logs when i try and add it - I
> > > think ovirt-engine is not aware that the HV got a new interface
> > > added.
> > >
> > > Would restarting vdsm help ? If so, would that take down my VMs ?
> >
> > I guess you could migrate the VMs to another host and try that.
> > However,
> > if doing that is not an option (no other hosts, for example), I
> > guess
> > there
> > would be a workaround from host-side.
> >
> > It would be something like the following (on host):
> >
> > vdsClient -s 0 addNetwork bridge=br2 bond=bond0 vlan=113
> > bridged=true
> > nics=nic0,nic1
> >
> > substitute nic0 and nic1 for the actual nics that are on the host.
> >
> > This will effectively do the setup you want on the host. As far as
> > making the
> > engine realize it... I'm not aware of all the actions that trigger
> > an
> > update. I know
> > that going to maintenance and back does it, but in this case I
> > guess
> > it is not an option.
> >
> > >
> > > Alex
> > >
> > >
> > >
> > >
> > > On 6 March 2013 12:23, Antoni Segura Puimedon <
> > > asegurap@redhat.com
> > > >
> > > wrote:
> > >
> > >
> > >
> > >
> > >
> > > ----- Original Message -----
> > > > From: "Alex Leonhardt" < alex.tuxx@gmail.com >
> > > > To: "oVirt Mailing List" < users@ovirt.org >
> > > > Sent: Wednesday, March 6, 2013 12:42:06 PM
> > > > Subject: Re: [Users] Adding a bond.vlantag to ovirt-node
> > > >
> > > >
> > > >
> > > > Sorry, the picture should actually say br2 :) ... have had to
> > > > edit
> > > > it
> > > > to protect the real name(s) ...
> > > >
> > > > Alex
> > > >
> > > >
> > > >
> > > >
> > > > On 6 March 2013 11:39, Alex Leonhardt < alex.tuxx@gmail.com >
> > > > wrote:
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > All,
> > > >
> > > > I've added manually a bond.<vlantag> to a Hyper-Visor, then
> > > > added
> > > > a
> > > > bridge and slaved bond.<vlantag> to it.
> > > >
> > > > I've upped the interfaces (no IPs), however ovirt-engine still
> > > > wont
> > > > allow me to add the new bridged interface. I did this
> > > > yesterday,
> > > > so
> > > > I thought, maybe it's just a cache issue, however, it doesnt
> > > > seem
> > > > to
> > > > update the HVs network config periodically ?
> > >
> > > What does the engine say when you try to add it? The message
> > > could
> > > give
> > > us a good hint.
> > >
> > >
> > >
> > > >
> > > > What can I do to get this sorted ?? I dont want to have to
> > > > restart
> > > > the networking as VMs are running and needed.
> > > >
> > > > FWIW, the setup looks like this -
> > > >
> > > >
> > > > eth0
> > > > | ----- bond0.111 --- br1
> > > > | ----- bond0.112 --- ovirtmgmt
> > > >
> > > >
> > > > eth1
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > the change was :
> > > >
> > > > eth0
> > > > | ----- bond0.111 --- br1
> > > > | ----- bond0.112 --- ovirtmgmt
> > > > | ----- bond0.113 --- br2
> > > > eth1
> > > >
> > > >
> > > > I then added "br2" to the ovirt-engine config, however, I'm not
> > > > able
> > > > to assign it to bond in the network config (web admin
> > > > interface)
> > > > for
> > > > the hyper visor / host.
> > > >
> > > >
> > > >
> > > > Also see screenshot attached.
> > > >
> > > >
> > > > Thanks
> > > > Alex
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > >
> > > >
> > > >
> > > > | RHCE | Senior Systems Engineer | www.vcore.co |
> > > > | www.vsearchcloud.com |
> > > >
> > > >
> > > >
> > > > --
> > > >
> > > >
> > > >
> > > > | RHCE | Senior Systems Engineer | www.vcore.co |
> > > > | www.vsearchcloud.com |
> > > >
> > > > _______________________________________________
> > > > Users mailing list
> > > > Users@ovirt.org
> > > > http://lists.ovirt.org/mailman/listinfo/users
> > > >
> > > _______________________________________________
> > > Users mailing list
> > > Users@ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> > >
> > >
> > >
> > > --
> > >
> > >
> > >
> > > | RHCE | Senior Systems Engineer | www.vcore.co |
> > > | www.vsearchcloud.com |
> > >
> >
> _______________________________________________
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
> --
>
>
>
> | RHCE | Senior Systems Engineer | www.vcore.co |
> | www.vsearchcloud.com |
>
>
>
> --
>
>
> | RHCE | Senior Systems Engineer | www.vcore.co |
> | www.vsearchcloud.com |
>
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users