On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson <rmeggins@redhat.com> wrote:
I'm sorry. I misunderstood the request.
We are in the process of updating the instructions for installing viaq logging based on upstream origin 3.9 - https://github.com/ViaQ/Main/pull/37
In the meantime, you can follow along on that PR, and we will have instructions very soon.
On 04/04/2018 08:26 AM, Rich Megginson wrote:
On 04/04/2018 08:22 AM, Shirly Radco wrote:
--
SHIRLY RADCO
BI SeNIOR SOFTWARE ENGINEER
Red Hat Israel <https://www.redhat.com/>
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec <phudec@cnc.sk <mailto:phudec@cnc.sk>> wrote:
almost the same issue, the versio for openshoft release changed to 3.9
Failure summary:
1. Hosts: localhost
Play: Determine openshift_version to configure on first
master
Task: For an RPM install, abort when the release
requested does
not match the available version.
Message: You requested openshift_release 3.9, which is not
matched by
the latest OpenShift RPM we detected as origin-3.10.0
on host localhost.
We will only install the latest RPMs, so please ensure
you are getting the release
you expect. You may need to adjust your Ansible
inventory, modify the repositories
available on the host, or run the appropriate OpenShift
upgrade playbook.
What is the rpm version installed of OpenShift origin?
Do you perhaps have another repo that includes the OpenShift origin-3.10.0?
origin is the upstream version of OpenShift, which is unsupported.
sudo repoquery -i origin
This will tell you which repo it came from
You will need to disable that repo and uninstall any packages which came from that repo
Another mystery is why it is trying to install origin in the first place. openshift-ansible with openshift_deployment_type=openshift-enterprise should not try to install origin, it should install packages with names like atomic-openshift-master, atomic-openshift-node, etc.
On 04/04/2018 14:18, Shirly Radco wrote:
> Adding Nicolas since he hit the same issue.
>
> --
>
> SHIRLY RADCO
>
> BI SeNIOR SOFTWARE ENGINEER
>
> Red Hat Israel <https://www.redhat.com/>
>
> <https://red.ht/sig>
> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>
>
> On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco <sradco@redhat.com <mailto:sradco@redhat.com>
> <mailto:sradco@redhat.com <mailto:sradco@redhat.com>>> wrote:
>
> Hi Peter,
>
> The installation instructions currently support OpenShift 3.6.
>
> I'm now working on updating them to support 3.9.
>
> You currently have 3.10 installed.
>
> Please install OpenShift 3.9 using this repository
> https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo
<https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >
> <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo
<https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >>
>
> And add the following file to your vm
>
> Run:
> vi /root/ansible-inventory-origin-39-aio
>
> Add:
>
> --------------
> [OSEv3:children]
> nodes
> masters
> etcd
>
> [OSEv3:vars]
> ansible_connection=local
> openshift_release=v3.9
> openshift_logging_install_logging=true
> short_version=3.9
> openshift_deployment_type=origin
> openshift_master_identity_providers=[{'mappingMethod': 'lookup',
> 'challenge': 'true', 'login': 'true', 'kind':
> 'AllowAllPasswordIdentityProvider', 'name': 'allow_all'}]
> # bug - doesn't use correct tag
> openshift_logging_image_version=v3.9
> openshift_logging_elasticsearch_proxy_image_version=v1.0.0
>
> openshift_logging_es_allow_external=True
> openshift_logging_use_mux=True
> openshift_logging_mux_allow_external=True
> openshift_logging_mux_file_buffer_storage_type=hostmount
> openshift_logging_elasticsearch_storage_type=hostmount
>
openshift_logging_elasticsearch_hostmount_path=/var/lib/ elasticsearch
>
> [nodes]
> localhost storage=True openshift_node_labels="{'region':
'infra'}"
> openshift_schedulable=True
>
> [masters]
> localhost storage=True openshift_node_labels="{'region':
'infra'}"
> openshift_schedulable=True
>
> [etcd]
> localhost storage=True openshift_node_labels="{'region':
'infra'}"
> openshift_schedulable=True
>
>
> ------------
>
> Save and exit.
>
>
> ***Please make sure that you use /var as your Elasticsearch
> persistent storage directory.
>
> And when you run the OpenShift ansible
>
(https://www.ovirt.org/develop/release-management/features/ metrics/setting-up-viaq- logging/#running-ansible
<https://www.ovirt.org/develop/release-management/features/ >metrics/setting-up-viaq- logging/#running-ansible
>
<https://www.ovirt.org/develop/release-management/features/ metrics/setting-up-viaq- logging/#running-ansible
<https://www.ovirt.org/develop/release-management/features/ >>)metrics/setting-up-viaq- logging/#running-ansible
> use the file you just created like this:
>
> # cd /usr/share/ansible/openshift-ansible
> # (or wherever you cloned the git repo if using git)
> ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e
> @/root/vars.yaml -i /root/*ansible-inventory-origin-39-aio*
> playbooks/byo/config.yml
>
> Best regards,
>
> --
>
> SHIRLY RADCO
>
> BI SeNIOR SOFTWARE ENGINEER
>
> Red Hat Israel <https://www.redhat.com/>
>
> <https://red.ht/sig>
> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>
>
> On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec <phudec@cnc.sk <mailto:phudec@cnc.sk>
> <mailto:phudec@cnc.sk <mailto:phudec@cnc.sk>>> wrote:
>
> Tried to install ovirt metrics, but got error
>
> ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e
> @/root/vars.yaml -i /root/ansible-inventory-origin-37-aio
> playbooks/byo/config.yml
>
> 1. Hosts: localhost
> Play: Determine openshift_version to configure
on first
> master
> Task: For an RPM install, abort when the release
> requested does
> not match the available version.
> Message: You requested openshift_release 3.7,
which is not
> matched by
> the latest OpenShift RPM we detected as
origin-3.10.0
> on host localhost.
> We will only install the latest RPMs, so
please
> ensure
> you are getting the release
> you expect. You may need to adjust your
Ansible
> inventory, modify the repositories
> available on the host, or run the appropriate
> OpenShift
> upgrade playbook.
>
> regards
> Peter
>
>
> On 04/04/2018 09:13, Fred Rolland wrote:
> > Hi,
> >
> > Check these links:
> >
> >
https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/
<https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >
>
<https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/
<https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >>
> >
https://ovirt.org/develop/release-management/features/metric s/metrics-store/
<https://ovirt.org/develop/release-management/features/metri >cs/metrics-store/
> <https://ovirt.org/develop/release-management/features/metr ics/metrics-store/
<https://ovirt.org/develop/release-management/features/metri >>cs/metrics-store/
> >
> > Regards,
> > Fred
> >
> > On Tue, Apr 3, 2018 at 9:38 AM, Anantha Raghava
> > <raghav@exzatechconsulting.com
<mailto:raghav@exzatechconsulting.com >
> <mailto:raghav@exzatechconsulting.com
<mailto:raghav@exzatechconsulting.com >>
> <mailto:raghav@exzatechconsulting.com
<mailto:raghav@exzatechconsulting.com >
> <mailto:raghav@exzatechconsulting.com
<mailto:raghav@exzatechconsulting.com >>>>
> > wrote:
> >
> > Hi,
> >
> > I see that oVirt DWH is installed with Version
4.2.x. Now, how do I
> > take the reports? I version 3.5, we had Jasper
reports module using
> > which we could take utilization reports. Can we do
something similar
> > here?
> >
> > --
> >
> > Thanks & Regards,
> >
> >
> > Anantha Raghava
> >
> >
> > Do not print this e-mail unless required. Save
Paper & trees.
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>
> > http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users >
> <http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users >>
> > <http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users >
> <http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users >>>
> >
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
> > http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users >
> <http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users >>
> >
>
>
> --
> *Peter Hudec*
> Infraštruktúrny architekt
> phudec@cnc.sk <mailto:phudec@cnc.sk> <mailto:phudec@cnc.sk
<mailto:phudec@cnc.sk>> <mailto:phudec@cnc.sk <mailto:phudec@cnc.sk>
> <mailto:phudec@cnc.sk <mailto:phudec@cnc.sk>>>
>
> *CNC, a.s.*
> Borská 6, 841 04 Bratislava
> Recepcia: +421 2 35 000 100
>
> Mobil:+421 905 997 203
> *www.cnc.sk <http://www.cnc.sk> <http://www.cnc.sk>*
<http:///www.cnc.sk <http://www.cnc.sk>
> <http://www.cnc.sk>>
>
> _______________________________________________
> Users mailing list
> Users@ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org
<mailto:Users@ovirt.org>>
> http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users >
> <http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users >>
>
>
>
--
*Peter Hudec*
Infraštruktúrny architekt
phudec@cnc.sk <mailto:phudec@cnc.sk> <mailto:phudec@cnc.sk
<mailto:phudec@cnc.sk>>
*CNC, a.s.*
Borská 6, 841 04 Bratislava
Recepcia: +421 2 35 000 100
Mobil:+421 905 997 203
*www.cnc.sk <http://www.cnc.sk>* <http:///www.cnc.sk
<http://www.cnc.sk>>