Hi,

On Thu, May 18, 2017 at 7:08 PM, Sahina Bose <sabose@redhat.com> wrote:

On Thu, May 18, 2017 at 3:20 PM, Mike DePaulo <mikedep333@gmail.com> wrote:

Well, I tried both of the following:
1. Having only a boot partition and a PV for the OS that does not take
up the entire disk, and then specifying "sda" in Hosted Engine Setup.
2. Having not only a boot partition and a PV for the OS, but also an
empty (and not formatted) /dev/sda3 PV that I created with fdisk.
Then, specfying "sda3" in Hosted Engine Setup.

Both attempts resulted in errors like this:
failed: [centerpoint.ad.depaulo.org] (item=/dev/sda3) => {"failed":
true, "failed_when_result": true, "item": "/dev/sda3", "msg": "
Device /dev/sda3 not found (or ignored by filtering).\n", "rc": 5}

Can you provide gdeploy logs? I think, it's at ~/.gdeploy/gdeploy.log
 

It seems like having gluster bricks on the same disk as the OS doesn't
work at all.

Hi, /dev/sda3 should work, the error here is possibly due to filesystem signature.

Can you please set wipefs=yes? For example

[pv]

action=create

wipefs=yes

devices=/dev/sda3

-sac