These are the last few steps of the installation before it disconnect after “[ovirt.hosted_engine_setup : Check engine VM health]” and I tried it more times than what I can remember

[ INFO ] TASK [ovirt.hosted_engine_setup : Initialize lockspace volume]

[ INFO ] skipping: [localhost]

[ INFO ] TASK [ovirt.hosted_engine_setup : Start ovirt-ha-agent service on the host]

[ INFO ] changed: [localhost]

[ INFO ] TASK [ovirt.hosted_engine_setup : Exit HE maintenance mode]

[ INFO ] changed: [localhost]

[ INFO ] TASK [ovirt.hosted_engine_setup : Check engine VM health]

Yours Sincerely,

Henni

From: Yedidyah Bar David <didi@redhat.com>
Sent: Wednesday, 21 October 2020 15:04
To: info@worldhostess.com
Cc: Edward Berger <edwberger@gmail.com>; users <users@ovirt.org>
Subject: [ovirt-users] Re: 20+ Fresh Installs Failing in 20+ days [newbie & frustrated]

On Wed, Oct 21, 2020 at 4:19 AM <info@worldhostess.com> wrote:

Did you try to ssh to the engine VM?
ssh is disconnecting within 1 second to 30 seconds, impossible to perform anything.

ssh to the host? Or to the engine vm?

If to the host, then you have some severe networking issues, I suggest to handle this first.

Command line install " hosted-engine --deploy" it gets to this point (see below) and disconnect and thereafter it is disconnecting ssh and http:// FQDN:9090

"[ INFO ] TASK [ovirt.hosted_engine_setup : Check engine VM health]"

https "Certificate invalid"

after I run " /usr/sbin/ovirt-hosted-engine-cleanup" I am able to ssh

Yours Sincerely,

Henni

-----Original Message-----
From: Yedidyah Bar David <didi@redhat.com>
Sent: Tuesday, 20 October 2020 14:05
To: info@worldhostess.com
Cc: Edward Berger <edwberger@gmail.com>; users <users@ovirt.org>
Subject: [ovirt-users] Re: 20+ Fresh Installs Failing in 20+ days [newbie & frustrated]

On Mon, Oct 19, 2020 at 6:00 PM <info@worldhostess.com> wrote:
>
> I used Cockpit web interface to do the install and I crashed again. I think it did not do the final part of the install. There are no other files such as "engine-side logs"

Did you try to ssh to the engine VM?

Do you see it running on the host?

>
> It keep disconnecting from the Cockpit

Due to env issues (communication etc.)? Or oVirt-specific ones (bugs)?

We do have an open bug about allowing to reconnect to cockpit in such cases, but it's still NEW for several years now:

https://bugzilla.redhat.com/show_bug.cgi?id=1422544

>
> This is my problem for the last few weeks, it will not complete the install and I have no idea why.

If this is your only problem, I suggest to try and work around it somehow:

Either by running the browser through which you connect to cockpit in some machine closer (network-wise) to the host you install on (and connect to that machine from your laptop using means that allow reconnection, some remote desktop or whatever), or using the command line tool/guide, which you can/should run inside tmux (and thus easily reconnect if needed).

Good luck and best regards,

>
> Yours Sincerely,
>
> Henni
>
>
> -----Original Message-----
> From: Yedidyah Bar David <didi@redhat.com>
> Sent: Monday, 19 October 2020 14:58
> To: info@worldhostess.com
> Cc: Edward Berger <edwberger@gmail.com>; users <users@ovirt.org>
> Subject: [ovirt-users] Re: 20+ Fresh Installs Failing in 20+ days
> [newbie & frustrated]
>
> Hi,
>
> On Fri, Oct 16, 2020 at 4:44 PM <info@worldhostess.com> wrote:
> >
> > Another zip file from fresh Centos & Ovirt install
> >
> > The following directories and files are included 1. openvswitch 2.
> > ovirt-hosted-engine-ha 3. ovirt-hosted-engine-setup 4. ovirt-imageio
> > 5. vdsm 6. firewalld
> >
> > https://drive.google.com/file/d/1QXj2eiNYseJvTVwmlDp8qwIWg64t45Sc/vi
> > ew
> > ?usp=sharing
>
> Thanks.
>
> It's still the same problem ("Check engine VM health" failed) and the zip still does not include engine-side logs (either from the engine vm itself or from subdirs of /var/log/ovirt-hosted-engine-setup). Please check/share these.
>
> Also, the files' timestamps are not kept, so 'ls -ltr' does not show them in the correct order. Is there a problem with simply using 'tar' as I suggested?
>
> Thanks and best regards,
> --
> Didi
> _______________________________________________
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-leave@ovirt.org Privacy
> Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/OSV5JYVZ
> TMAJJ7L4O4XHAIBWDL5VKZNP/
>

--
Didi
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/GNHTNCLXXXQMYMDR657QEXDCOIYGZKQ2/

Didi