Should I understand then that fecing is not mandatory, just advised and there are no downtimes to the rest of the cluster if a pending manual action has to be done to confirm a host has been rebooted in order to move the SPM to another live host. Perhaps only effect is not be able to add new hosts and connect to storage or something ?

Fernando

On 17/04/2017 10:06, Nir Soffer wrote:

On Mon, Apr 17, 2017 at 8:24 AM Konstantin Raskoshnyi <konrasko@gmail.com> wrote:

But actually, it didn't work well. After main SPM host went down I see this

2017-04-17 05:23:15,554Z ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxy] (DefaultQuartzScheduler5) [4dcc033d-26bf-49bb-bfaa-03a970dbbec1] SPM Init: could not find reported vds or not up - pool: 'STG' vds_spm_id: '1'

2017-04-17 05:23:15,567Z INFO  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxy] (DefaultQuartzScheduler5) [4dcc033d-26bf-49bb-bfaa-03a970dbbec1] SPM selection - vds seems as spm 'tank5'

2017-04-17 05:23:15,567Z WARN  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxy] (DefaultQuartzScheduler5) [4dcc033d-26bf-49bb-bfaa-03a970dbbec1] spm vds is non responsive, stopping spm selection.

So that means only if BMC is up it's possible to automatically switch  SPM host?

BMC?

If your SPM is no responsive, the system will try to fence it. Did you 

configure power management for all hosts? did you check that it 

work? How did you simulate non-responsive host? 

If power management is not configured or fail, the system cannot

move the spm to another host, unless you manually confirm that the

SPM host was rebooted.

Nir

 

Thanks

On Sun, Apr 16, 2017 at 8:29 PM, Konstantin Raskoshnyi <konrasko@gmail.com> wrote:

Oh, fence agent works fine if I select ilo4,

Thank you for your help!

On Sun, Apr 16, 2017 at 8:22 PM Dan Yasny <dyasny@gmail.com> wrote:

On Sun, Apr 16, 2017 at 11:19 PM, Konstantin Raskoshnyi <konrasko@gmail.com> wrote:

Makes sense. 

I was trying to set it up, but doesn't work with our staging hardware. 

We have old ilo100, I'll try again. 

Thanks!

It is absolutely necessary for any HA to work properly. There's of course the "confirm host has been shutdown" option, which serves as an override for the fence command, but it's manual

 

On Sun, Apr 16, 2017 at 8:18 PM Dan Yasny <dyasny@gmail.com> wrote:

On Sun, Apr 16, 2017 at 11:15 PM, Konstantin Raskoshnyi <konrasko@gmail.com> wrote:

Fence agent under each node?

When you configure a host, there's the power management tab, where you need to enter the bmc details for the host. If you don't have fencing enabled, how do you expect the system to make sure a host running a service is actually down (and it is safe to start HA services elsewhere), and not, for example, just unreachable by the engine? How do you avoid a splitbraid -> SBA ?

 

On Sun, Apr 16, 2017 at 8:14 PM Dan Yasny <dyasny@gmail.com> wrote:

On Sun, Apr 16, 2017 at 11:13 PM, Konstantin Raskoshnyi <konrasko@gmail.com> wrote:

"Corner cases"? 

I tried to simulate crash of SPM server and ovirt kept trying to reistablished connection to the failed node. 

Did you configure fencing?

 

On Sun, Apr 16, 2017 at 8:10 PM Dan Yasny <dyasny@gmail.com> wrote:

On Sun, Apr 16, 2017 at 7:29 AM, Nir Soffer <nsoffer@redhat.com> wrote:

On Sun, Apr 16, 2017 at 2:05 PM Dan Yasny <dyasny@redhat.com> wrote:

On Apr 16, 2017 7:01 AM, "Nir Soffer" <nsoffer@redhat.com> wrote:

On Sun, Apr 16, 2017 at 4:17 AM Dan Yasny <dyasny@gmail.com> wrote:

When you set up a storage domain, you need to specify a host to perform the initial storage operations, but once the SD is defined, it's details are in the engine database, and all the hosts get connected to it directly. If the first host you used to define the SD goes down, all other hosts will still remain connected and work. SPM is an HA service, and if the current SPM host goes down, SPM gets started on another host in the DC. In short, unless your actual NFS exporting host goes down, there is no outage. 

There is no storage outage, but if you shutdown the spm host, the spm host

will not move to a new host until the spm host is online again, or you confirm

manually that the spm host was rebooted.

In a properly configured setup the SBA should take care of that. That's the whole point of HA services 

In some cases like power loss or hardware failure, there is no way to start

the spm host, and the system cannot recover automatically.

There are always corner cases, no doubt. But in a normal situation. where an SPM host goes down because of a hardware failure, it gets fenced, other hosts contend for SPM and start it. No surprises there. 

 

Nir

 

Nir

 

On Sat, Apr 15, 2017 at 1:53 PM, Konstantin Raskoshnyi <konrasko@gmail.com> wrote:

Hi Fernando,

I see each host has direct connection nfs mount, but yes, if main host to which I connected nfs storage going down the storage becomes unavailable and all vms are down

On Sat, Apr 15, 2017 at 10:37 AM FERNANDO FREDIANI <fernando.frediani@upx.com> wrote:

Hello Konstantin.

That doesn`t make much sense make a whole cluster depend on a single host. From what I know any host talk directly to NFS Storage Array or whatever other Shared Storage you have.

Have you tested that host going down if that affects the other with the NFS mounted directlly in a NFS Storage array ?

Fernando

2017-04-15 12:42 GMT-03:00 Konstantin Raskoshnyi <konrasko@gmail.com>:

In ovirt you have to attach storage through specific host. 

If host goes down storage is not available. 

On Sat, Apr 15, 2017 at 7:31 AM FERNANDO FREDIANI <fernando.frediani@upx.com> wrote:

Well, make it not go through host1 and dedicate a storage server for running NFS and make both hosts connect to it.

In my view NFS is much easier to manage than any other type of storage, specially FC and iSCSI and performance is pretty much the same, so you won`t get better results other than management going to other type.

Fernando

2017-04-15 5:25 GMT-03:00 Konstantin Raskoshnyi <konrasko@gmail.com>:

Hi guys,

I have one nfs storage,

it's connected through host1.

host2 also has access to it, I can easily migrate vms between them.

The question is - if host1 is down - all infrastructure is down, since all traffic goes through host1,

is there any way in oVirt to use redundant storage?

Only glusterfs?

Thanks

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users