PLAY [Setup backend] ***********************************************************

TASK [Gathering Facts] *********************************************************
ok: [dev1-centos.office.barredowlweb.com]

TASK [Check if valid hostnames are provided] ***********************************
changed: [dev1-centos.office.barredowlweb.com] => (item=dev1-centos.office.barredowlweb.com)

TASK [Check if provided hostnames are valid] ***********************************
ok: [dev1-centos.office.barredowlweb.com] => {
    "changed": false,
    "msg": "All assertions passed"
}

TASK [Check if /var/log has enough disk space] *********************************
skipping: [dev1-centos.office.barredowlweb.com]

TASK [Check if the /var is greater than 15G] ***********************************
skipping: [dev1-centos.office.barredowlweb.com]

TASK [Check if disks have logical block size of 512B] **************************
skipping: [dev1-centos.office.barredowlweb.com] => (item={'vgname': 'gluster_vg_sdb', 'pvname': '/dev/sdb'}) 

TASK [Check if logical block size is 512 bytes] ********************************
skipping: [dev1-centos.office.barredowlweb.com] => (item=Logical Block Size) 

TASK [Get logical block size of VDO devices] ***********************************
skipping: [dev1-centos.office.barredowlweb.com]

TASK [Check if logical block size is 512 bytes for VDO devices] ****************
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/firewall_config : Start firewalld if not already started] ***
ok: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/firewall_config : check if required variables are set] ***
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/firewall_config : Open/Close firewalld ports] ********
changed: [dev1-centos.office.barredowlweb.com] => (item=2049/tcp)
changed: [dev1-centos.office.barredowlweb.com] => (item=54321/tcp)
changed: [dev1-centos.office.barredowlweb.com] => (item=5900/tcp)
changed: [dev1-centos.office.barredowlweb.com] => (item=5900-6923/tcp)
changed: [dev1-centos.office.barredowlweb.com] => (item=5666/tcp)
changed: [dev1-centos.office.barredowlweb.com] => (item=16514/tcp)

TASK [gluster.infra/roles/firewall_config : Add/Delete services to firewalld rules] ***
ok: [dev1-centos.office.barredowlweb.com] => (item=glusterfs)

TASK [gluster.infra/roles/backend_setup : Check that the multipath.conf exists] ***
ok: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Ensure that multipathd services is enabled if not] ***
changed: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Ensure that multipathd services is running] ***
ok: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Create /etc/multipath/conf.d if doesn't exists] ***
changed: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Get the UUID of the devices] *********
failed: [dev1-centos.office.barredowlweb.com] (item=sdb) => {"ansible_loop_var": "item", "changed": true, "cmd": "multipath -a /dev/sdb", "delta": "0:00:00.011851", "end": "2020-08-26 23:59:47.973240", "item": "sdb", "msg": "non-zero return code", "rc": 1, "start": "2020-08-26 23:59:47.961389", "stderr": "Aug 26 23:59:47 | '/dev/sdb' is not a valid argument", "stderr_lines": ["Aug 26 23:59:47 | '/dev/sdb' is not a valid argument"], "stdout": "", "stdout_lines": []}
...ignoring

TASK [gluster.infra/roles/backend_setup : Check that the blacklist.conf exists] ***
ok: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Create blacklist template content] ***
changed: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Add wwid to blacklist in blacklist.conf file] ***
skipping: [dev1-centos.office.barredowlweb.com] => (item={'msg': 'non-zero return code', 'cmd': 'multipath -a /dev/sdb', 'stdout': '', 'stderr': "Aug 26 23:59:47 | '/dev/sdb' is not a valid argument", 'rc': 1, 'start': '2020-08-26 23:59:47.961389', 'end': '2020-08-26 23:59:47.973240', 'delta': '0:00:00.011851', 'changed': True, 'failed': True, 'invocation': {'module_args': {'_raw_params': 'multipath -a /dev/sdb', '_uses_shell': True, 'warn': True, 'stdin_add_newline': True, 'strip_empty_ends': True, 'argv': None, 'chdir': None, 'executable': None, 'creates': None, 'removes': None, 'stdin': None}}, 'stdout_lines': [], 'stderr_lines': ["Aug 26 23:59:47 | '/dev/sdb' is not a valid argument"], 'item': 'sdb', 'ansible_loop_var': 'item'}) 

TASK [gluster.infra/roles/backend_setup : Reload multipathd] *******************
changed: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Gather facts to determine the OS distribution] ***
ok: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Change to Install lvm tools for debian systems.] ***
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Change to Install lvm tools for RHEL systems.] ***
ok: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Install python-yaml package for Debian systems] ***
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Initialize vdo_devs array] ***********
ok: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Record VDO devices (if any)] *********
skipping: [dev1-centos.office.barredowlweb.com] => (item={'vgname': 'gluster_vg_sdb', 'pvname': '/dev/sdb'}) 

TASK [gluster.infra/roles/backend_setup : Configure lvm thinpool extend threshold] ***
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Configure lvm thinpool extend percentage] ***
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Check if vdo block device exists] ****
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Record for missing devices for phase 2] ***
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : set fact if it will at least install 1 vdo device] ***

TASK [gluster.infra/roles/backend_setup : Install VDO dependencies] ************
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : set fact about vdo installed deps] ***
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Enable and start vdo service] ********
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Create VDO with specified size] ******
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Set VDO maxDiscardSize as 16M] *******
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Restart all VDO volumes] *************
skipping: [dev1-centos.office.barredowlweb.com] => (item=stop) 
skipping: [dev1-centos.office.barredowlweb.com] => (item=start) 

TASK [gluster.infra/roles/backend_setup : Check if valid disktype is provided] ***
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Set PV data alignment for JBOD] ******
ok: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Set PV data alignment for RAID] ******
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Set VG physical extent size for RAID] ***
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : include_tasks] ***********************
included: /etc/ansible/roles/gluster.infra/roles/backend_setup/tasks/get_vg_groupings.yml for dev1-centos.office.barredowlweb.com

TASK [gluster.infra/roles/backend_setup : Group devices by volume group name, including existing devices] ***
ok: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Check if vg block device exists] *****
changed: [dev1-centos.office.barredowlweb.com] => (item={'key': 'gluster_vg_sdb', 'value': [{'vgname': 'gluster_vg_sdb', 'pvname': '/dev/sdb'}]})

TASK [gluster.infra/roles/backend_setup : Filter none-existing devices] ********
ok: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Record for missing devices for phase 2] ***
ok: [dev1-centos.office.barredowlweb.com] => (item={'cmd': ' test -b /dev/sdb && echo "1" || echo  "0"; \n', 'stdout': '0', 'stderr': '', 'rc': 0, 'start': '2020-08-27 00:00:36.714157', 'end': '2020-08-27 00:00:36.719662', 'delta': '0:00:00.005505', 'changed': True, 'invocation': {'module_args': {'_raw_params': ' test -b /dev/sdb && echo "1" || echo  "0"; \n', '_uses_shell': True, 'warn': True, 'stdin_add_newline': True, 'strip_empty_ends': True, 'argv': None, 'chdir': None, 'executable': None, 'creates': None, 'removes': None, 'stdin': None}}, 'stdout_lines': ['0'], 'stderr_lines': [], 'failed': False, 'item': {'key': 'gluster_vg_sdb', 'value': [{'vgname': 'gluster_vg_sdb', 'pvname': '/dev/sdb'}]}, 'ansible_loop_var': 'item'})

TASK [gluster.infra/roles/backend_setup : Create volume groups] ****************
skipping: [dev1-centos.office.barredowlweb.com] => (item={'key': 'gluster_vg_sdb', 'value': []}) 

TASK [gluster.infra/roles/backend_setup : update LVM fact's] *******************
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Check if thick-lv block devices exists] ***
changed: [dev1-centos.office.barredowlweb.com] => (item={'vgname': 'gluster_vg_sdb', 'lvname': 'gluster_lv_engine', 'size': '100G'})

TASK [gluster.infra/roles/backend_setup : Record for missing devices for phase 2] ***
skipping: [dev1-centos.office.barredowlweb.com] => (item={'cmd': ' echo "1" \n', 'stdout': '1', 'stderr': '', 'rc': 0, 'start': '2020-08-27 00:00:44.428729', 'end': '2020-08-27 00:00:44.434341', 'delta': '0:00:00.005612', 'changed': True, 'invocation': {'module_args': {'_raw_params': ' echo "1" \n', '_uses_shell': True, 'warn': True, 'stdin_add_newline': True, 'strip_empty_ends': True, 'argv': None, 'chdir': None, 'executable': None, 'creates': None, 'removes': None, 'stdin': None}}, 'stdout_lines': ['1'], 'stderr_lines': [], 'failed': False, 'item': {'vgname': 'gluster_vg_sdb', 'lvname': 'gluster_lv_engine', 'size': '100G'}, 'ansible_loop_var': 'item'}) 

TASK [gluster.infra/roles/backend_setup : include_tasks] ***********************
included: /etc/ansible/roles/gluster.infra/roles/backend_setup/tasks/get_vg_groupings.yml for dev1-centos.office.barredowlweb.com

TASK [gluster.infra/roles/backend_setup : Group devices by volume group name, including existing devices] ***
ok: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Check if vg block device exists] *****

TASK [gluster.infra/roles/backend_setup : Filter none-existing devices] ********
ok: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Make sure thick pvs exists in volume group] ***

TASK [gluster.infra/roles/backend_setup : update LVM fact's] *******************
skipping: [dev1-centos.office.barredowlweb.com]

TASK [gluster.infra/roles/backend_setup : Create thick logical volume] *********
failed: [dev1-centos.office.barredowlweb.com] (item={'vgname': 'gluster_vg_sdb', 'lvname': 'gluster_lv_engine', 'size': '100G'}) => {"ansible_index_var": "index", "ansible_loop_var": "item", "changed": false, "err": "  Volume group \"gluster_vg_sdb\" not found.\n  Cannot process volume group gluster_vg_sdb\n", "index": 0, "item": {"lvname": "gluster_lv_engine", "size": "100G", "vgname": "gluster_vg_sdb"}, "msg": "Volume group gluster_vg_sdb does not exist.", "rc": 5}

NO MORE HOSTS LEFT *************************************************************

NO MORE HOSTS LEFT *************************************************************

PLAY RECAP *********************************************************************
dev1-centos.office.barredowlweb.com : ok=27   changed=9    unreachable=0    failed=1    skipped=31   rescued=0    ignored=1   

Please check /var/log/cockpit/ovirt-dashboard/gluster-deployment.log for more informations.