11:40 a.m.
Hi,
I've created a new UI plugin that allows invocation of VDSM commands
directly from the WebAdmin (using CGI scripts and vdsClient).
You can read all about it in my blog: http://derezvir.blogspot.co.il/
Thanks,
Daniel
4:56 a.m.
On Sun, Jun 09, 2013 at 12:40:39PM -0400, Daniel Erez wrote:
Hi,
I've created a new UI plugin that allows invocation of VDSM commands
directly from the WebAdmin (using CGI scripts and vdsClient).
You can read all about it in my blog: http://derezvir.blogspot.co.il/
Oh, cool!
Two comments though: it would be safer to do
from vdsm import vdscli
and use the vdscli module directly. vdsClient has many flaws and
limitations (e.g. it's impossible to start a new vm with the "devices"
API, only with the old nicModel/bridge/macAddr way).
It should not be difficult to make your UI plugin work with ssl=True,
too. All that should be done is to fix vdscli.connect() to look for its
key/certs in the proper place. Currently, and ancient codepiece there,
assumes that the Engine run on Windows (/me shudders).
Regards,
Dan.
5:15 a.m.
I have a problem with the plugin.
I installed it like the other ui-plugins I use, but if I choose a
function like "GetAllTasks", I only get a new window with the ovirt
startpage.
Am 09.06.2013 18:40, schrieb Daniel Erez:
Hi,
I've created a new UI plugin that allows invocation of VDSM commands
directly from the WebAdmin (using CGI scripts and vdsClient).
You can read all about it in my blog: http://derezvir.blogspot.co.il/
Thanks,
Daniel
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Mit freundlichen Grüßen
Michael Wagenknecht
FuH Entwicklungsgesellschaft mbH
Geschäftsführer Carola Fornoff
HRB Freiburg 701203, UID DE255007372
Hauptstr. 4, D-79224 Umkirch
Tel +49 7665 93288-0, Fax -150
7:59 a.m.
----- Original Message -----
From: "Michael Wagenknecht" <Wagenknecht(a)FuH-E.de>
To: users(a)ovirt.org
Sent: Monday, June 10, 2013 1:15:34 PM
Subject: Re: [Users] New UI plugin: UI-VDSM-Hooks
I have a problem with the plugin.
I installed it like the other ui-plugins I use, but if I choose a
function like "GetAllTasks", I only get a new window with the ovirt
startpage.
Have you copied the cgi-bin folder into a web server in your host?
Am 09.06.2013 18:40, schrieb Daniel Erez:
> Hi,
>
> I've created a new UI plugin that allows invocation of VDSM commands
> directly from the WebAdmin (using CGI scripts and vdsClient).
>
> You can read all about it in my blog: http://derezvir.blogspot.co.il/
>
> Thanks,
> Daniel
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
--
Mit freundlichen Grüßen
Michael Wagenknecht
FuH Entwicklungsgesellschaft mbH
Geschäftsführer Carola Fornoff
HRB Freiburg 701203, UID DE255007372
Hauptstr. 4, D-79224 Umkirch
Tel +49 7665 93288-0, Fax -150
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
8:06 a.m.
Yes I have and the ui-vdsm-hooks.cgi is accessable from the web server.
Am 10.06.2013 14:59, schrieb Daniel Erez:
----- Original Message -----
> From: "Michael Wagenknecht"<Wagenknecht(a)FuH-E.de>
> To: users(a)ovirt.org
> Sent: Monday, June 10, 2013 1:15:34 PM
> Subject: Re: [Users] New UI plugin: UI-VDSM-Hooks
>
> I have a problem with the plugin.
> I installed it like the other ui-plugins I use, but if I choose a
> function like "GetAllTasks", I only get a new window with the ovirt
> startpage.
Have you copied the cgi-bin folder into a web server in your host?
>
> Am 09.06.2013 18:40, schrieb Daniel Erez:
>> Hi,
>>
>> I've created a new UI plugin that allows invocation of VDSM commands
>> directly from the WebAdmin (using CGI scripts and vdsClient).
>>
>> You can read all about it in my blog: http://derezvir.blogspot.co.il/
>>
>> Thanks,
>> Daniel
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
> --
> Mit freundlichen Grüßen
>
> Michael Wagenknecht
> FuH Entwicklungsgesellschaft mbH
> Geschäftsführer Carola Fornoff
> HRB Freiburg 701203, UID DE255007372
> Hauptstr. 4, D-79224 Umkirch
> Tel +49 7665 93288-0, Fax -150
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
--
Mit freundlichen Grüßen
Michael Wagenknecht
FuH Entwicklungsgesellschaft mbH
Geschäftsführer Carola Fornoff
HRB Freiburg 701203, UID DE255007372
Hauptstr. 4, D-79224 Umkirch
Tel +49 7665 93288-0, Fax -150
8:32 a.m.
Hi Daniel,
First of all thanks for the very useful plugin!
Is this plugin compatible with oVirt 3.2.1 or is a newer version
required (didn't update to 3.2.2 yet)? I'm having the same issue as
Michale and I think api.showDialog causes this issue, but didn't had
enough time to verify yet...
Regards,
René
On Mon, 2013-06-10 at 15:06 +0200, Michael Wagenknecht wrote:
Yes I have and the ui-vdsm-hooks.cgi is accessable from the web
server.
Am 10.06.2013 14:59, schrieb Daniel Erez:
>
> ----- Original Message -----
>> From: "Michael Wagenknecht"<Wagenknecht(a)FuH-E.de>
>> To: users(a)ovirt.org
>> Sent: Monday, June 10, 2013 1:15:34 PM
>> Subject: Re: [Users] New UI plugin: UI-VDSM-Hooks
>>
>> I have a problem with the plugin.
>> I installed it like the other ui-plugins I use, but if I choose a
>> function like "GetAllTasks", I only get a new window with the ovirt
>> startpage.
> Have you copied the cgi-bin folder into a web server in your host?
>
>>
>> Am 09.06.2013 18:40, schrieb Daniel Erez:
>>> Hi,
>>>
>>> I've created a new UI plugin that allows invocation of VDSM commands
>>> directly from the WebAdmin (using CGI scripts and vdsClient).
>>>
>>> You can read all about it in my blog: http://derezvir.blogspot.co.il/
>>>
>>> Thanks,
>>> Daniel
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>> --
>> Mit freundlichen Grüßen
>>
>> Michael Wagenknecht
>> FuH Entwicklungsgesellschaft mbH
>> Geschäftsführer Carola Fornoff
>> HRB Freiburg 701203, UID DE255007372
>> Hauptstr. 4, D-79224 Umkirch
>> Tel +49 7665 93288-0, Fax -150
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
11:15 a.m.
In this case I'd suggest selinux.
If you'll add some code to the vdsClient to log what's going on we'll
have more insights on the issue.
----- Original Message -----
From: "Michael Wagenknecht" <Wagenknecht(a)FuH-E.de>
To: "Daniel Erez" <derez(a)redhat.com>
Cc: users(a)ovirt.org
Sent: Monday, June 10, 2013 4:06:48 PM
Subject: Re: [Users] New UI plugin: UI-VDSM-Hooks
Yes I have and the ui-vdsm-hooks.cgi is accessable from the web server.
Am 10.06.2013 14:59, schrieb Daniel Erez:
>
> ----- Original Message -----
>> From: "Michael Wagenknecht"<Wagenknecht(a)FuH-E.de>
>> To: users(a)ovirt.org
>> Sent: Monday, June 10, 2013 1:15:34 PM
>> Subject: Re: [Users] New UI plugin: UI-VDSM-Hooks
>>
>> I have a problem with the plugin.
>> I installed it like the other ui-plugins I use, but if I choose a
>> function like "GetAllTasks", I only get a new window with the ovirt
>> startpage.
> Have you copied the cgi-bin folder into a web server in your host?
>
>>
>> Am 09.06.2013 18:40, schrieb Daniel Erez:
>>> Hi,
>>>
>>> I've created a new UI plugin that allows invocation of VDSM commands
>>> directly from the WebAdmin (using CGI scripts and vdsClient).
>>>
>>> You can read all about it in my blog: http://derezvir.blogspot.co.il/
>>>
>>> Thanks,
>>> Daniel
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>> --
>> Mit freundlichen Grüßen
>>
>> Michael Wagenknecht
>> FuH Entwicklungsgesellschaft mbH
>> Geschäftsführer Carola Fornoff
>> HRB Freiburg 701203, UID DE255007372
>> Hauptstr. 4, D-79224 Umkirch
>> Tel +49 7665 93288-0, Fax -150
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
--
Mit freundlichen Grüßen
Michael Wagenknecht
FuH Entwicklungsgesellschaft mbH
Geschäftsführer Carola Fornoff
HRB Freiburg 701203, UID DE255007372
Hauptstr. 4, D-79224 Umkirch
Tel +49 7665 93288-0, Fax -150
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
1:45 p.m.
----- Original Message -----
From: "René Koch (ovido)" <r.koch(a)ovido.at>
To: "Michael Wagenknecht" <Wagenknecht(a)FuH-E.de>
Cc: "Daniel Erez" <derez(a)redhat.com>, users(a)ovirt.org
Sent: Monday, June 10, 2013 4:32:46 PM
Subject: Re: [Users] New UI plugin: UI-VDSM-Hooks
Hi Daniel,
First of all thanks for the very useful plugin!
Is this plugin compatible with oVirt 3.2.1 or is a newer version
required (didn't update to 3.2.2 yet)? I'm having the same issue as
Michale and I think api.showDialog causes this issue, but didn't had
enough time to verify yet...
It would probably require newer builds...
As the plugin uses a rather recent API (e.g. adding a button 'OnlyFromContext').
Regards,
René
On Mon, 2013-06-10 at 15:06 +0200, Michael Wagenknecht wrote:
> Yes I have and the ui-vdsm-hooks.cgi is accessable from the web server.
>
>
> Am 10.06.2013 14:59, schrieb Daniel Erez:
> >
> > ----- Original Message -----
> >> From: "Michael Wagenknecht"<Wagenknecht(a)FuH-E.de>
> >> To: users(a)ovirt.org
> >> Sent: Monday, June 10, 2013 1:15:34 PM
> >> Subject: Re: [Users] New UI plugin: UI-VDSM-Hooks
> >>
> >> I have a problem with the plugin.
> >> I installed it like the other ui-plugins I use, but if I choose a
> >> function like "GetAllTasks", I only get a new window with the
ovirt
> >> startpage.
> > Have you copied the cgi-bin folder into a web server in your host?
> >
> >>
> >> Am 09.06.2013 18:40, schrieb Daniel Erez:
> >>> Hi,
> >>>
> >>> I've created a new UI plugin that allows invocation of VDSM
commands
> >>> directly from the WebAdmin (using CGI scripts and vdsClient).
> >>>
> >>> You can read all about it in my blog: http://derezvir.blogspot.co.il/
> >>>
> >>> Thanks,
> >>> Daniel
> >>> _______________________________________________
> >>> Users mailing list
> >>> Users(a)ovirt.org
> >>> http://lists.ovirt.org/mailman/listinfo/users
> >> --
> >> Mit freundlichen Grüßen
> >>
> >> Michael Wagenknecht
> >> FuH Entwicklungsgesellschaft mbH
> >> Geschäftsführer Carola Fornoff
> >> HRB Freiburg 701203, UID DE255007372
> >> Hauptstr. 4, D-79224 Umkirch
> >> Tel +49 7665 93288-0, Fax -150
> >>
> >>
> >> _______________________________________________
> >> Users mailing list
> >> Users(a)ovirt.org
> >> http://lists.ovirt.org/mailman/listinfo/users
> >>
>
11:21 a.m.
Hi Daniel,
this plugin looks very cool!
I'm starting to realize that CGI scripts are quite handy for implementing any sort of
server-side logic for UI plugins, especially since we have Apache web server in front of
JBoss application server (Engine) in standard oVirt installation.
Looking at the code, this plugin should work fine with oVirt 3.2.1+ since showDialog API
changes landed into 3.2.1 release.
Regarding the issue with bad dialog content - you can edit start.html and put following
code right before api.showDialog call:
window.alert(url);
This will show actual dialog content URL - you can try opening this URL normally in
browser and see what happens. My guess is that it will show same thing as the dialog.
Important thing is, this URL points to *selected host* machine (not Engine), i.e.
http://<hostAddress>/cgi-bin/ui-vdsm-hooks/ui-vdsm-hooks.cgi?command=<cmd>&args=<args>
This means selected host machine should have some web server like Apache installed with
necessary CGI scripts in place, i.e. cgi-bin/ui-vdsm-hooks/ui-vdsm-hooks.cgi +
cgi-bin/ui-vdsm-hooks/scripts/vdsClientApi.py -> CGI scripts are invoked right on given
host machine.
Michael, René - can you try ^^ and let us know if you still encounter issues with bad
dialog content? What happens when you manually open dialog content URL in browser?
Regards,
Vojtech
----- Original Message -----
From: "Daniel Erez" <derez(a)redhat.com>
To: "René Koch (ovido)" <r.koch(a)ovido.at>
Cc: users(a)ovirt.org
Sent: Monday, June 10, 2013 8:45:37 PM
Subject: Re: [Users] New UI plugin: UI-VDSM-Hooks
----- Original Message -----
> From: "René Koch (ovido)" <r.koch(a)ovido.at>
> To: "Michael Wagenknecht" <Wagenknecht(a)FuH-E.de>
> Cc: "Daniel Erez" <derez(a)redhat.com>, users(a)ovirt.org
> Sent: Monday, June 10, 2013 4:32:46 PM
> Subject: Re: [Users] New UI plugin: UI-VDSM-Hooks
>
> Hi Daniel,
>
> First of all thanks for the very useful plugin!
>
> Is this plugin compatible with oVirt 3.2.1 or is a newer version
> required (didn't update to 3.2.2 yet)? I'm having the same issue as
> Michale and I think api.showDialog causes this issue, but didn't had
> enough time to verify yet...
It would probably require newer builds...
As the plugin uses a rather recent API (e.g. adding a button
'OnlyFromContext').
>
>
> Regards,
> René
>
>
>
>
> On Mon, 2013-06-10 at 15:06 +0200, Michael Wagenknecht wrote:
> > Yes I have and the ui-vdsm-hooks.cgi is accessable from the web server.
> >
> >
> > Am 10.06.2013 14:59, schrieb Daniel Erez:
> > >
> > > ----- Original Message -----
> > >> From: "Michael Wagenknecht"<Wagenknecht(a)FuH-E.de>
> > >> To: users(a)ovirt.org
> > >> Sent: Monday, June 10, 2013 1:15:34 PM
> > >> Subject: Re: [Users] New UI plugin: UI-VDSM-Hooks
> > >>
> > >> I have a problem with the plugin.
> > >> I installed it like the other ui-plugins I use, but if I choose a
> > >> function like "GetAllTasks", I only get a new window with
the ovirt
> > >> startpage.
> > > Have you copied the cgi-bin folder into a web server in your host?
> > >
> > >>
> > >> Am 09.06.2013 18:40, schrieb Daniel Erez:
> > >>> Hi,
> > >>>
> > >>> I've created a new UI plugin that allows invocation of VDSM
commands
> > >>> directly from the WebAdmin (using CGI scripts and vdsClient).
> > >>>
> > >>> You can read all about it in my blog:
http://derezvir.blogspot.co.il/
> > >>>
> > >>> Thanks,
> > >>> Daniel
> > >>> _______________________________________________
> > >>> Users mailing list
> > >>> Users(a)ovirt.org
> > >>> http://lists.ovirt.org/mailman/listinfo/users
> > >> --
> > >> Mit freundlichen Grüßen
> > >>
> > >> Michael Wagenknecht
> > >> FuH Entwicklungsgesellschaft mbH
> > >> Geschäftsführer Carola Fornoff
> > >> HRB Freiburg 701203, UID DE255007372
> > >> Hauptstr. 4, D-79224 Umkirch
> > >> Tel +49 7665 93288-0, Fax -150
> > >>
> > >>
> > >> _______________________________________________
> > >> Users mailing list
> > >> Users(a)ovirt.org
> > >> http://lists.ovirt.org/mailman/listinfo/users
> > >>
> >
>
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
10:45 a.m.
Sorry for not coming back to your earlier.
I was on vacation and afterwards totally busy with projects.
I'll check it this week and will let you know.
Regards,
René
On Wed, 2013-06-19 at 12:21 -0400, Vojtech Szocs wrote:
Hi Daniel,
this plugin looks very cool!
I'm starting to realize that CGI scripts are quite handy for implementing any sort of
server-side logic for UI plugins, especially since we have Apache web server in front of
JBoss application server (Engine) in standard oVirt installation.
Looking at the code, this plugin should work fine with oVirt 3.2.1+ since showDialog API
changes landed into 3.2.1 release.
Regarding the issue with bad dialog content - you can edit start.html and put following
code right before api.showDialog call:
window.alert(url);
This will show actual dialog content URL - you can try opening this URL normally in
browser and see what happens. My guess is that it will show same thing as the dialog.
Important thing is, this URL points to *selected host* machine (not Engine), i.e.
http://<hostAddress>/cgi-bin/ui-vdsm-hooks/ui-vdsm-hooks.cgi?command=<cmd>&args=<args>
This means selected host machine should have some web server like Apache installed with
necessary CGI scripts in place, i.e. cgi-bin/ui-vdsm-hooks/ui-vdsm-hooks.cgi +
cgi-bin/ui-vdsm-hooks/scripts/vdsClientApi.py -> CGI scripts are invoked right on given
host machine.
Michael, René - can you try ^^ and let us know if you still encounter issues with bad
dialog content? What happens when you manually open dialog content URL in browser?
Regards,
Vojtech
----- Original Message -----
> From: "Daniel Erez" <derez(a)redhat.com>
> To: "René Koch (ovido)" <r.koch(a)ovido.at>
> Cc: users(a)ovirt.org
> Sent: Monday, June 10, 2013 8:45:37 PM
> Subject: Re: [Users] New UI plugin: UI-VDSM-Hooks
>
>
>
> ----- Original Message -----
> > From: "René Koch (ovido)" <r.koch(a)ovido.at>
> > To: "Michael Wagenknecht" <Wagenknecht(a)FuH-E.de>
> > Cc: "Daniel Erez" <derez(a)redhat.com>, users(a)ovirt.org
> > Sent: Monday, June 10, 2013 4:32:46 PM
> > Subject: Re: [Users] New UI plugin: UI-VDSM-Hooks
> >
> > Hi Daniel,
> >
> > First of all thanks for the very useful plugin!
> >
> > Is this plugin compatible with oVirt 3.2.1 or is a newer version
> > required (didn't update to 3.2.2 yet)? I'm having the same issue as
> > Michale and I think api.showDialog causes this issue, but didn't had
> > enough time to verify yet...
>
> It would probably require newer builds...
> As the plugin uses a rather recent API (e.g. adding a button
> 'OnlyFromContext').
>
> >
> >
> > Regards,
> > René
> >
> >
> >
> >
> > On Mon, 2013-06-10 at 15:06 +0200, Michael Wagenknecht wrote:
> > > Yes I have and the ui-vdsm-hooks.cgi is accessable from the web server.
> > >
> > >
> > > Am 10.06.2013 14:59, schrieb Daniel Erez:
> > > >
> > > > ----- Original Message -----
> > > >> From: "Michael
Wagenknecht"<Wagenknecht(a)FuH-E.de>
> > > >> To: users(a)ovirt.org
> > > >> Sent: Monday, June 10, 2013 1:15:34 PM
> > > >> Subject: Re: [Users] New UI plugin: UI-VDSM-Hooks
> > > >>
> > > >> I have a problem with the plugin.
> > > >> I installed it like the other ui-plugins I use, but if I choose
a
> > > >> function like "GetAllTasks", I only get a new window
with the ovirt
> > > >> startpage.
> > > > Have you copied the cgi-bin folder into a web server in your host?
> > > >
> > > >>
> > > >> Am 09.06.2013 18:40, schrieb Daniel Erez:
> > > >>> Hi,
> > > >>>
> > > >>> I've created a new UI plugin that allows invocation of
VDSM commands
> > > >>> directly from the WebAdmin (using CGI scripts and
vdsClient).
> > > >>>
> > > >>> You can read all about it in my blog:
http://derezvir.blogspot.co.il/
> > > >>>
> > > >>> Thanks,
> > > >>> Daniel
> > > >>> _______________________________________________
> > > >>> Users mailing list
> > > >>> Users(a)ovirt.org
> > > >>> http://lists.ovirt.org/mailman/listinfo/users
> > > >> --
> > > >> Mit freundlichen Grüßen
> > > >>
> > > >> Michael Wagenknecht
> > > >> FuH Entwicklungsgesellschaft mbH
> > > >> Geschäftsführer Carola Fornoff
> > > >> HRB Freiburg 701203, UID DE255007372
> > > >> Hauptstr. 4, D-79224 Umkirch
> > > >> Tel +49 7665 93288-0, Fax -150
> > > >>
> > > >>
> > > >> _______________________________________________
> > > >> Users mailing list
> > > >> Users(a)ovirt.org
> > > >> http://lists.ovirt.org/mailman/listinfo/users
> > > >>
> > >
> >
> >
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
3924
days inactive
3968
days old
9 comments
6 participants
participants (6)
-
Dan Kenigsberg -
Daniel Erez -
Doron Fediuck -
Michael Wagenknecht -
René Koch (ovido) -
Vojtech Szocs