Hi, You have to define logical networks (in datacenter and assign to cluster) and configure these logical networks on your host (using hosts - network interfaces subtab). When using multiple logical networks on 1 physical nic you will need most likely VLAN tagging, as all vm networks are configured as a bridge in oVirt. See the following 2 links on how to tag your ovirtmgmt interface: http://lists.ovirt.org/pipermail/users/2013-May/014286.html http://lists.ovirt.org/pipermail/users/2013-May/014297.html Hope this helps. -- Best Regards René Koch Senior Solution Architect ============================================ ovido gmbh - "Das Linux Systemhaus" Brünner Stra03 163, A-1210 Wien Phone: +43 720 / 530 670 Mobile: +43 660 / 512 21 31 E-Mail: r.koch@ovido.at ============================================ On 05/13/2013 08:36 AM, Frank Wall wrote:
Hi,
I'm using oVirt 3.2 on a single hosts with only one NIC. Currently there is only the ovirtmgmt network configured. But I need to add more networks, especially some internal networks like 192.168.x.y/24 need to be usable for VMs.
From the oVirt Admin Portal this does not seem to be possible. It seems I cannot reuse the ovirtmgmt interface for any other network. Is this true? How am I supposed to add several networks in oVirt if I have just one NIC?
Thanks - Frank _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users