Emulex OneConnect 10Gb NICs on Ovirt 4.4.10
Hi We have a large number of HP servers where we use Ovirt and we are having problems upgrading the nodes to Ovirt 4.4.10 More specifically the servers have the Emulex OneConnect 10Gb NICs and what we did in previous Ovirt node installations was to download the driver rpm (e.g. kmod-be2net-12.0.0.0-8.el8_5.elrepo.x86_64.rpm) and then install it using "rpm -ivh ... " and carrying out "modprobe be2net" For 4.18.0-365 we could not find a separate rpm but it looks like this was included in kernel-modules-4.18.0-365.el8.x86_64.rpm (https://centos.pkgs.org/8-stream/centos-baseos-x86_64/kernel-modules-4.18.0-...) which is already installed. "modprobe be2net" produces no errors but the network interfaces do not show up in "ip -a" even after reboot. Are we missing something here, or is our infrastructure unusable with 4.4.10? Things were working for 4.4.9. Thanks!
I hit this too, RH appears to have limited the supported PCI ids in their be2net and no longer includes the Emulex OneConnect in the list of supported IDs. I switched to the EL repo mainline kernels to resolve the issue on existing systems, it was a bit more fun on systems needing new installs of 8.x. I think I settled on installing an older system, switching kernels, and then upgrading to current. Good luck, -Darrell
On Apr 13, 2022, at 12:12 AM, thkam@hua.gr wrote:
Hi
We have a large number of HP servers where we use Ovirt and we are having problems upgrading the nodes to Ovirt 4.4.10
More specifically the servers have the Emulex OneConnect 10Gb NICs and what we did in previous Ovirt node installations was to download the driver rpm (e.g. kmod-be2net-12.0.0.0-8.el8_5.elrepo.x86_64.rpm) and then install it using "rpm -ivh ... " and carrying out "modprobe be2net"
For 4.18.0-365 we could not find a separate rpm but it looks like this was included in kernel-modules-4.18.0-365.el8.x86_64.rpm (https://centos.pkgs.org/8-stream/centos-baseos-x86_64/kernel-modules-4.18.0-...) which is already installed. "modprobe be2net" produces no errors but the network interfaces do not show up in "ip -a" even after reboot.
Are we missing something here, or is our infrastructure unusable with 4.4.10? Things were working for 4.4.9.
Thanks! _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AFSJ76ZGLMM7RV...
Thanks Darrell I think I understand your point, but it looks to me like such a bother to have to do things like this. I will try starting from 4.4.9. Could a solution be to install Debian and run kvm to install the ovirt-node? I guess you waste some resources doing this but maybe worth it if you can skip all this kernel business. BR Thomas On Wed, Apr 13, 2022 at 10:35 PM Darrell Budic <budic@onholyground.com> wrote:
I hit this too, RH appears to have limited the supported PCI ids in their be2net and no longer includes the Emulex OneConnect in the list of supported IDs. I switched to the EL repo mainline kernels to resolve the issue on existing systems, it was a bit more fun on systems needing new installs of 8.x. I think I settled on installing an older system, switching kernels, and then upgrading to current.
Good luck,
-Darrell
On Apr 13, 2022, at 12:12 AM, thkam@hua.gr wrote:
Hi
We have a large number of HP servers where we use Ovirt and we are having problems upgrading the nodes to Ovirt 4.4.10
More specifically the servers have the Emulex OneConnect 10Gb NICs and what we did in previous Ovirt node installations was to download the driver rpm (e.g. kmod-be2net-12.0.0.0-8.el8_5.elrepo.x86_64.rpm) and then install it using "rpm -ivh ... " and carrying out "modprobe be2net"
For 4.18.0-365 we could not find a separate rpm but it looks like this was included in kernel-modules-4.18.0-365.el8.x86_64.rpm ( https://centos.pkgs.org/8-stream/centos-baseos-x86_64/kernel-modules-4.18.0-...) which is already installed. "modprobe be2net" produces no errors but the network interfaces do not show up in "ip -a" even after reboot.
Are we missing something here, or is our infrastructure unusable with 4.4.10? Things were working for 4.4.9.
Thanks! _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AFSJ76ZGLMM7RV...
-- Dr. Thomas Kamalakis Professor and Dean of the School of Digital Technology Department of Informatics and Telematics, Harokopio University of Athens, Greece Omirou 9, Tavros, Athens, GR17778, Tel: +302109549406, Web: https://galaxy.hua.gr/~thkam, Github: https://github.com/thomaskamalakis/
What gen is your hardware ? Best Regards,Strahil Nikolov On Thu, Apr 14, 2022 at 9:00, Thomas Kamalakis<thkam@hua.gr> wrote: _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/D7LC6BMGWM4DXR...
ProLiant BL460c Gen8 BR Thomas On Thu, Apr 14, 2022 at 5:38 PM Strahil Nikolov <hunter86_bg@yahoo.com> wrote:
What gen is your hardware ?
Best Regards, Strahil Nikolov
On Thu, Apr 14, 2022 at 9:00, Thomas Kamalakis <thkam@hua.gr> wrote: _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/D7LC6BMGWM4DXR...
-- Dr. Thomas Kamalakis Professor and Dean of the School of Digital Technology Department of Informatics and Telematics, Harokopio University of Athens, Greece Omirou 9, Tavros, Athens, GR17778, Tel: +302109549406, Web: https://galaxy.hua.gr/~thkam, Github: https://github.com/thomaskamalakis/
The problem isn’t with Ovirt 4.4.x, it’s the underlying red hat/centos 8 stream OS that no longer supports the Emulex. So if you have an existing system, it should be easy enough to switch to the EL Repo kernels and the proceed with the 4.4.10 updates. It’s a bigger headache if you’re installing fresh, in which case using a different OS that supports kernel drivers for your hardware should work. Unless you’re using Ovirt Node, in which case I don’t think there’s a good solution for that short of spinning your own with a custom kernel.
On Apr 14, 2022, at 12:57 AM, Thomas Kamalakis <thkam@hua.gr> wrote:
Thanks Darrell
I think I understand your point, but it looks to me like such a bother to have to do things like this. I will try starting from 4.4.9.
Could a solution be to install Debian and run kvm to install the ovirt-node? I guess you waste some resources doing this but maybe worth it if you can skip all this kernel business.
BR
Thomas
On Wed, Apr 13, 2022 at 10:35 PM Darrell Budic <budic@onholyground.com <mailto:budic@onholyground.com>> wrote: I hit this too, RH appears to have limited the supported PCI ids in their be2net and no longer includes the Emulex OneConnect in the list of supported IDs. I switched to the EL repo mainline kernels to resolve the issue on existing systems, it was a bit more fun on systems needing new installs of 8.x. I think I settled on installing an older system, switching kernels, and then upgrading to current.
Good luck,
-Darrell
On Apr 13, 2022, at 12:12 AM, thkam@hua.gr <mailto:thkam@hua.gr> wrote:
Hi
We have a large number of HP servers where we use Ovirt and we are having problems upgrading the nodes to Ovirt 4.4.10
More specifically the servers have the Emulex OneConnect 10Gb NICs and what we did in previous Ovirt node installations was to download the driver rpm (e.g. kmod-be2net-12.0.0.0-8.el8_5.elrepo.x86_64.rpm) and then install it using "rpm -ivh ... " and carrying out "modprobe be2net"
For 4.18.0-365 we could not find a separate rpm but it looks like this was included in kernel-modules-4.18.0-365.el8.x86_64.rpm (https://centos.pkgs.org/8-stream/centos-baseos-x86_64/kernel-modules-4.18.0-... <https://centos.pkgs.org/8-stream/centos-baseos-x86_64/kernel-modules-4.18.0-365.el8.x86_64.rpm.html>) which is already installed. "modprobe be2net" produces no errors but the network interfaces do not show up in "ip -a" even after reboot.
Are we missing something here, or is our infrastructure unusable with 4.4.10? Things were working for 4.4.9.
Thanks! _______________________________________________ Users mailing list -- users@ovirt.org <mailto:users@ovirt.org> To unsubscribe send an email to users-leave@ovirt.org <mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/privacy-policy.html <https://www.ovirt.org/privacy-policy.html> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ <https://www.ovirt.org/community/about/community-guidelines/> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AFSJ76ZGLMM7RV... <https://lists.ovirt.org/archives/list/users@ovirt.org/message/AFSJ76ZGLMM7RVNTNIK7L6PIKG2X2HSV/>
-- Dr. Thomas Kamalakis Professor and Dean of the School of Digital Technology Department of Informatics and Telematics, Harokopio University of Athens, Greece Omirou 9, Tavros, Athens, GR17778, Tel: +302109549406, Web: https://galaxy.hua.gr/~thkam <https://galaxy.hua.gr/~thkam>, Github: https://github.com/thomaskamalakis/ <https://github.com/thomaskamalakis/>
I also have Gen8 and those are nearly 8 years old.With EL8 Gen8 is no longer supported (this doesn't mean it doesn't work)and many of the kernel modules don't recognize the old hardware. As recommend, you can use elrepo to solve the problem. Best Regards,Strahil Nikolov On Thu, Apr 14, 2022 at 19:07, Darrell Budic<budic@onholyground.com> wrote: _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5WHKJRN5KBGZ5V...
Hi all It looks like Gen9 is also not supported in RHEL8. Its a shame, from our side it looks like a deal breaker since we are not ready to part with our old but reliable servers. Maybe we will try Proxmox. Thanks you all for your help BR Thomas On Fri, 15 Apr 2022, 00:04 Strahil Nikolov, <hunter86_bg@yahoo.com> wrote:
I also have Gen8 and those are nearly 8 years old. With EL8 Gen8 is no longer supported (this doesn't mean it doesn't work)and many of the kernel modules don't recognize the old hardware. As recommend, you can use elrepo to solve the problem.
Best Regards, Strahil Nikolov
On Thu, Apr 14, 2022 at 19:07, Darrell Budic <budic@onholyground.com> wrote: _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5WHKJRN5KBGZ5V...
My cent. I've used both Gen8 and Gen9 with ElRepo drivers, in light production, without any problem, more than 2 years. Also qla2xxx driver was from ElRepo, being cluster with FC storage. Roberto Il Gio 14 Apr 2022, 08:04 Thomas Kamalakis <thkam@hua.gr> ha scritto:
Thanks Darrell
I think I understand your point, but it looks to me like such a bother to have to do things like this. I will try starting from 4.4.9.
Could a solution be to install Debian and run kvm to install the ovirt-node? I guess you waste some resources doing this but maybe worth it if you can skip all this kernel business.
BR
Thomas
On Wed, Apr 13, 2022 at 10:35 PM Darrell Budic <budic@onholyground.com> wrote:
I hit this too, RH appears to have limited the supported PCI ids in their be2net and no longer includes the Emulex OneConnect in the list of supported IDs. I switched to the EL repo mainline kernels to resolve the issue on existing systems, it was a bit more fun on systems needing new installs of 8.x. I think I settled on installing an older system, switching kernels, and then upgrading to current.
Good luck,
-Darrell
On Apr 13, 2022, at 12:12 AM, thkam@hua.gr wrote:
Hi
We have a large number of HP servers where we use Ovirt and we are having problems upgrading the nodes to Ovirt 4.4.10
More specifically the servers have the Emulex OneConnect 10Gb NICs and what we did in previous Ovirt node installations was to download the driver rpm (e.g. kmod-be2net-12.0.0.0-8.el8_5.elrepo.x86_64.rpm) and then install it using "rpm -ivh ... " and carrying out "modprobe be2net"
For 4.18.0-365 we could not find a separate rpm but it looks like this was included in kernel-modules-4.18.0-365.el8.x86_64.rpm ( https://centos.pkgs.org/8-stream/centos-baseos-x86_64/kernel-modules-4.18.0-...) which is already installed. "modprobe be2net" produces no errors but the network interfaces do not show up in "ip -a" even after reboot.
Are we missing something here, or is our infrastructure unusable with 4.4.10? Things were working for 4.4.9.
Thanks! _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AFSJ76ZGLMM7RV...
-- Dr. Thomas Kamalakis Professor and Dean of the School of Digital Technology Department of Informatics and Telematics, Harokopio University of Athens, Greece Omirou 9, Tavros, Athens, GR17778, Tel: +302109549406, Web: https://galaxy.hua.gr/~thkam, Github: https://github.com/thomaskamalakis/
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/D7LC6BMGWM4DXR...
Hi Roberto We also used the ElRepo drivers in production - most of our e-learning servers including BBB are on oVirt Gen8 hosts. No problems whatsoever The problem is that I could not find drivers for the kernel version of the 4.4.10 release. Thomas On Sat, 16 Apr 2022, 19:58 Roberto Nunin, <robnunin@gmail.com> wrote:
My cent.
I've used both Gen8 and Gen9 with ElRepo drivers, in light production, without any problem, more than 2 years.
Also qla2xxx driver was from ElRepo, being cluster with FC storage.
Roberto
Il Gio 14 Apr 2022, 08:04 Thomas Kamalakis <thkam@hua.gr> ha scritto:
Thanks Darrell
I think I understand your point, but it looks to me like such a bother to have to do things like this. I will try starting from 4.4.9.
Could a solution be to install Debian and run kvm to install the ovirt-node? I guess you waste some resources doing this but maybe worth it if you can skip all this kernel business.
BR
Thomas
On Wed, Apr 13, 2022 at 10:35 PM Darrell Budic <budic@onholyground.com> wrote:
I hit this too, RH appears to have limited the supported PCI ids in their be2net and no longer includes the Emulex OneConnect in the list of supported IDs. I switched to the EL repo mainline kernels to resolve the issue on existing systems, it was a bit more fun on systems needing new installs of 8.x. I think I settled on installing an older system, switching kernels, and then upgrading to current.
Good luck,
-Darrell
On Apr 13, 2022, at 12:12 AM, thkam@hua.gr wrote:
Hi
We have a large number of HP servers where we use Ovirt and we are having problems upgrading the nodes to Ovirt 4.4.10
More specifically the servers have the Emulex OneConnect 10Gb NICs and what we did in previous Ovirt node installations was to download the driver rpm (e.g. kmod-be2net-12.0.0.0-8.el8_5.elrepo.x86_64.rpm) and then install it using "rpm -ivh ... " and carrying out "modprobe be2net"
For 4.18.0-365 we could not find a separate rpm but it looks like this was included in kernel-modules-4.18.0-365.el8.x86_64.rpm ( https://centos.pkgs.org/8-stream/centos-baseos-x86_64/kernel-modules-4.18.0-...) which is already installed. "modprobe be2net" produces no errors but the network interfaces do not show up in "ip -a" even after reboot.
Are we missing something here, or is our infrastructure unusable with 4.4.10? Things were working for 4.4.9.
Thanks! _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AFSJ76ZGLMM7RV...
-- Dr. Thomas Kamalakis Professor and Dean of the School of Digital Technology Department of Informatics and Telematics, Harokopio University of Athens, Greece Omirou 9, Tavros, Athens, GR17778, Tel: +302109549406, Web: https://galaxy.hua.gr/~thkam, Github: https://github.com/thomaskamalakis/
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/D7LC6BMGWM4DXR...
Hi Thomas I've also checked 4.4.9 with "additional" drivers grabbed from ElRepo, on both Gen8/9. I'm still on 4.4.9, on RHVH hosts and oVirt nodes. No problems until now, since November. Roberto Il Sab 16 Apr 2022, 20:23 Thomas Kamalakis <thkam@hua.gr> ha scritto:
Hi Roberto
We also used the ElRepo drivers in production - most of our e-learning servers including BBB are on oVirt Gen8 hosts. No problems whatsoever
The problem is that I could not find drivers for the kernel version of the 4.4.10 release.
Thomas
On Sat, 16 Apr 2022, 19:58 Roberto Nunin, <robnunin@gmail.com> wrote:
My cent.
I've used both Gen8 and Gen9 with ElRepo drivers, in light production, without any problem, more than 2 years.
Also qla2xxx driver was from ElRepo, being cluster with FC storage.
Roberto
Il Gio 14 Apr 2022, 08:04 Thomas Kamalakis <thkam@hua.gr> ha scritto:
Thanks Darrell
I think I understand your point, but it looks to me like such a bother to have to do things like this. I will try starting from 4.4.9.
Could a solution be to install Debian and run kvm to install the ovirt-node? I guess you waste some resources doing this but maybe worth it if you can skip all this kernel business.
BR
Thomas
On Wed, Apr 13, 2022 at 10:35 PM Darrell Budic <budic@onholyground.com> wrote:
I hit this too, RH appears to have limited the supported PCI ids in their be2net and no longer includes the Emulex OneConnect in the list of supported IDs. I switched to the EL repo mainline kernels to resolve the issue on existing systems, it was a bit more fun on systems needing new installs of 8.x. I think I settled on installing an older system, switching kernels, and then upgrading to current.
Good luck,
-Darrell
On Apr 13, 2022, at 12:12 AM, thkam@hua.gr wrote:
Hi
We have a large number of HP servers where we use Ovirt and we are having problems upgrading the nodes to Ovirt 4.4.10
More specifically the servers have the Emulex OneConnect 10Gb NICs and what we did in previous Ovirt node installations was to download the driver rpm (e.g. kmod-be2net-12.0.0.0-8.el8_5.elrepo.x86_64.rpm) and then install it using "rpm -ivh ... " and carrying out "modprobe be2net"
For 4.18.0-365 we could not find a separate rpm but it looks like this was included in kernel-modules-4.18.0-365.el8.x86_64.rpm ( https://centos.pkgs.org/8-stream/centos-baseos-x86_64/kernel-modules-4.18.0-...) which is already installed. "modprobe be2net" produces no errors but the network interfaces do not show up in "ip -a" even after reboot.
Are we missing something here, or is our infrastructure unusable with 4.4.10? Things were working for 4.4.9.
Thanks! _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AFSJ76ZGLMM7RV...
-- Dr. Thomas Kamalakis Professor and Dean of the School of Digital Technology Department of Informatics and Telematics, Harokopio University of Athens, Greece Omirou 9, Tavros, Athens, GR17778, Tel: +302109549406, Web: https://galaxy.hua.gr/~thkam, Github: https://github.com/thomaskamalakis/
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/D7LC6BMGWM4DXR...
And also used the be2net With Rocky 8.5 on Gen9. Works as expected, until now. Roberto Il Sab 16 Apr 2022, 20:36 Roberto Nunin <robnunin@gmail.com> ha scritto:
Hi Thomas
I've also checked 4.4.9 with "additional" drivers grabbed from ElRepo, on both Gen8/9.
I'm still on 4.4.9, on RHVH hosts and oVirt nodes.
No problems until now, since November.
Roberto
Il Sab 16 Apr 2022, 20:23 Thomas Kamalakis <thkam@hua.gr> ha scritto:
Hi Roberto
We also used the ElRepo drivers in production - most of our e-learning servers including BBB are on oVirt Gen8 hosts. No problems whatsoever
The problem is that I could not find drivers for the kernel version of the 4.4.10 release.
Thomas
On Sat, 16 Apr 2022, 19:58 Roberto Nunin, <robnunin@gmail.com> wrote:
My cent.
I've used both Gen8 and Gen9 with ElRepo drivers, in light production, without any problem, more than 2 years.
Also qla2xxx driver was from ElRepo, being cluster with FC storage.
Roberto
Il Gio 14 Apr 2022, 08:04 Thomas Kamalakis <thkam@hua.gr> ha scritto:
Thanks Darrell
I think I understand your point, but it looks to me like such a bother to have to do things like this. I will try starting from 4.4.9.
Could a solution be to install Debian and run kvm to install the ovirt-node? I guess you waste some resources doing this but maybe worth it if you can skip all this kernel business.
BR
Thomas
On Wed, Apr 13, 2022 at 10:35 PM Darrell Budic <budic@onholyground.com> wrote:
I hit this too, RH appears to have limited the supported PCI ids in their be2net and no longer includes the Emulex OneConnect in the list of supported IDs. I switched to the EL repo mainline kernels to resolve the issue on existing systems, it was a bit more fun on systems needing new installs of 8.x. I think I settled on installing an older system, switching kernels, and then upgrading to current.
Good luck,
-Darrell
On Apr 13, 2022, at 12:12 AM, thkam@hua.gr wrote:
Hi
We have a large number of HP servers where we use Ovirt and we are having problems upgrading the nodes to Ovirt 4.4.10
More specifically the servers have the Emulex OneConnect 10Gb NICs and what we did in previous Ovirt node installations was to download the driver rpm (e.g. kmod-be2net-12.0.0.0-8.el8_5.elrepo.x86_64.rpm) and then install it using "rpm -ivh ... " and carrying out "modprobe be2net"
For 4.18.0-365 we could not find a separate rpm but it looks like this was included in kernel-modules-4.18.0-365.el8.x86_64.rpm ( https://centos.pkgs.org/8-stream/centos-baseos-x86_64/kernel-modules-4.18.0-...) which is already installed. "modprobe be2net" produces no errors but the network interfaces do not show up in "ip -a" even after reboot.
Are we missing something here, or is our infrastructure unusable with 4.4.10? Things were working for 4.4.9.
Thanks! _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AFSJ76ZGLMM7RV...
-- Dr. Thomas Kamalakis Professor and Dean of the School of Digital Technology Department of Informatics and Telematics, Harokopio University of Athens, Greece Omirou 9, Tavros, Athens, GR17778, Tel: +302109549406, Web: https://galaxy.hua.gr/~thkam, Github: https://github.com/thomaskamalakis/
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/D7LC6BMGWM4DXR...
participants (5)
-
Darrell Budic -
Roberto Nunin -
Strahil Nikolov -
thkam＠hua.gr -
Thomas Kamalakis