Re: [Users] GlusterFS on oVirt node
Adding to node-devel list and users list. -- Mike Apologies for top posting and typos. This was sent from a mobile device. Saša Friedrich <sasa.friedrich@bitlab.si> wrote: Hello! Acording to http://www.ovirt.org/Node_Glusterfs_Support glusterfs on ovirt node should be supported. But I have some difficulties to implement it. I installed ovirt (nested kvm - home testing) following "Up and Running with oVirt 3.3) using Fedora19 Install went well. Everything is working fine. Now I created two hosts (nested kvm - ovirt node fc19 - just for testing) and added them in oVirt. Super fine - working! Now I'd like to use this hosts as glustefs nodes too. Acording to google (I'm googling for two days now) I'ts possible, but I can not find any usable how-to 1. I removed these two hosts from default data center 2. I created new data center (type: GlusterFS) 3. I created new cluster (Enable Gluster Service checked) 4. I added host 5. Now I get error message in events: "Could not find gluster uuid of server host1 on Cluster Cluster1." If I ssh to my host (fc19 node) glusterd.service is not running. If I try to run it It returns error here is the log: [2013-10-24 09:52:25.969899] I [glusterfsd.c:1910:main] 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.4.0 (/usr/sbin/glusterd -p /run/glusterd.pid) [2013-10-24 09:52:25.974480] I [glusterd.c:962:init] 0-management: Using /var/lib/glusterd as working directory [2013-10-24 09:52:25.977648] I [socket.c:3480:socket_init] 0-socket.management: SSL support is NOT enabled [2013-10-24 09:52:25.977694] I [socket.c:3495:socket_init] 0-socket.management: using system polling thread [2013-10-24 09:52:25.978611] W [rdma.c:4197:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device) [2013-10-24 09:52:25.978651] E [rdma.c:4485:init] 0-rdma.management: Failed to initialize IB Device [2013-10-24 09:52:25.978667] E [rpc-transport.c:320:rpc_transport_load] 0-rpc-transport: 'rdma' initialization failed [2013-10-24 09:52:25.978747] W [rpcsvc.c:1387:rpcsvc_transport_create] 0-rpc-service: cannot create listener, initing the transport failed [2013-10-24 09:52:25.979890] I [glusterd.c:354:glusterd_check_gsync_present] 0-glusterd: geo-replication module not installed in the system [2013-10-24 09:52:25.980000] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980026] E [glusterd-store.c:1277:glusterd_retrieve_op_version] 0-: Unable to get store handle! [2013-10-24 09:52:25.980048] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980060] E [glusterd-store.c:1378:glusterd_retrieve_uuid] 0-: Unable to get store handle! [2013-10-24 09:52:25.980074] I [glusterd-store.c:1348:glusterd_restore_op_version] 0-management: Detected new install. Setting op-version to maximum : 2 [2013-10-24 09:52:25.980309] E [store.c:360:gf_store_handle_new] 0-: Failed to open file: /var/lib/glusterd/options, error: Read-only file system Acording to log /var/lib/glusterd/glusterd.info is missing and can not be created because fs is mounted "ro". Now I'm stuck! What am I missing? tnx for help!
This is a multi-part message in MIME format. --------------020705030200020402030002 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit Progress report: I remounted fs on oVirt nodes rw, started glusterd with no errors. Then I activated hosts in oVirt Engine. Also no errors! Yei! Then I created volume (replication), added two bricks (oVirt nodes), and started volume. Seems fine. I checkd on node1: # gluster volume info Volume Name: data_vol Type: Replicate Volume ID: a1cdc762-2198-47e2-9b4a-58fd0571b269 Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: 192.168.254.124:/data/gluster Brick2: 192.168.254.141:/data/gluster Options Reconfigured: storage.owner-gid: 36 storage.owner-uid: 36 auth.allow: * user.cifs: on nfs.disable: off WORKING! BUT... Now i can not create storage domain. When I hit OK button on "New storage domain dialog", process is running very long. Eventually this process stops and returns " Error while executing action Add Storage Connection: Network error during communication with the Host". I'm stuck again :-( in need for HELP! tnx Dne 24. 10. 2013 13:02, piše Mike Burns:
Adding to node-devel list and users list.
-- Mike
Apologies for top posting and typos. This was sent from a mobile device.
Saša Friedrich <sasa.friedrich@bitlab.si> wrote:
Hello!
Acording to http://www.ovirt.org/Node_Glusterfs_Support glusterfs on ovirt node should be supported. But I have some difficulties to implement it.
I installed ovirt (nested kvm - home testing) following "Up and Running with oVirt 3.3) using Fedora19 Install went well. Everything is working fine.
Now I created two hosts (nested kvm - ovirt node fc19 - just for testing) and added them in oVirt. Super fine - working!
Now I'd like to use this hosts as glustefs nodes too. Acording to google (I'm googling for two days now) I'ts possible, but I can not find any usable how-to
1. I removed these two hosts from default data center 2. I created new data center (type: GlusterFS) 3. I created new cluster (Enable Gluster Service checked) 4. I added host 5. Now I get error message in events: "Could not find gluster uuid of server host1 on Cluster Cluster1."
If I ssh to my host (fc19 node) glusterd.service is not running. If I try to run it It returns error
here is the log: [2013-10-24 09:52:25.969899] I [glusterfsd.c:1910:main] 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.4.0 (/usr/sbin/glusterd -p /run/glusterd.pid) [2013-10-24 09:52:25.974480] I [glusterd.c:962:init] 0-management: Using /var/lib/glusterd as working directory [2013-10-24 09:52:25.977648] I [socket.c:3480:socket_init] 0-socket.management: SSL support is NOT enabled [2013-10-24 09:52:25.977694] I [socket.c:3495:socket_init] 0-socket.management: using system polling thread [2013-10-24 09:52:25.978611] W [rdma.c:4197:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device) [2013-10-24 09:52:25.978651] E [rdma.c:4485:init] 0-rdma.management: Failed to initialize IB Device [2013-10-24 09:52:25.978667] E [rpc-transport.c:320:rpc_transport_load] 0-rpc-transport: 'rdma' initialization failed [2013-10-24 09:52:25.978747] W [rpcsvc.c:1387:rpcsvc_transport_create] 0-rpc-service: cannot create listener, initing the transport failed [2013-10-24 09:52:25.979890] I [glusterd.c:354:glusterd_check_gsync_present] 0-glusterd: geo-replication module not installed in the system [2013-10-24 09:52:25.980000] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980026] E [glusterd-store.c:1277:glusterd_retrieve_op_version] 0-: Unable to get store handle! [2013-10-24 09:52:25.980048] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980060] E [glusterd-store.c:1378:glusterd_retrieve_uuid] 0-: Unable to get store handle! [2013-10-24 09:52:25.980074] I [glusterd-store.c:1348:glusterd_restore_op_version] 0-management: Detected new install. Setting op-version to maximum : 2 [2013-10-24 09:52:25.980309] E [store.c:360:gf_store_handle_new] 0-: Failed to open file: /var/lib/glusterd/options, error: Read-only file system
Acording to log /var/lib/glusterd/glusterd.info is missing and can not be created because fs is mounted "ro".
Now I'm stuck! What am I missing?
tnx for help!
--------------020705030200020402030002 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 8bit <html> <head> <meta content="text/html; charset=UTF-8" http-equiv="Content-Type"> </head> <body text="#000000" bgcolor="#FFFFFF"> Progress report:<br> <br> I remounted fs on oVirt nodes rw, started glusterd with no errors.<br> Then I activated hosts in oVirt Engine. Also no errors! Yei!<br> <br> Then I created volume (replication), added two bricks (oVirt nodes), and started volume. Seems fine. I checkd on node1:<br> <br> # gluster volume info<br> <br> Volume Name: data_vol<br> Type: Replicate<br> Volume ID: a1cdc762-2198-47e2-9b4a-58fd0571b269<br> Status: Started<br> Number of Bricks: 1 x 2 = 2<br> Transport-type: tcp<br> Bricks:<br> Brick1: 192.168.254.124:/data/gluster<br> Brick2: 192.168.254.141:/data/gluster<br> Options Reconfigured:<br> storage.owner-gid: 36<br> storage.owner-uid: 36<br> auth.allow: *<br> user.cifs: on<br> nfs.disable: off<br> <br> <br> <br> WORKING!<br> <br> <br> BUT... Now i can not create storage domain. When I hit OK button on "New storage domain dialog", process is running very long. Eventually this process stops and returns " <meta http-equiv="content-type" content="text/html; charset=UTF-8"> Error while executing action Add Storage Connection: Network error during communication with the Host". <br> <br> I'm stuck again :-( in need for HELP!<br> <br> <br> tnx<br> <br> <br> <br> <br> <div class="moz-cite-prefix">Dne 24. 10. 2013 13:02, piše Mike Burns:<br> </div> <blockquote cite="mid:mg5ip57ksoma3jew446nd7jj.1382612544981@email.android.com" type="cite"> <pre wrap="">Adding to node-devel list and users list. -- Mike Apologies for top posting and typos. This was sent from a mobile device. Saša Friedrich <a class="moz-txt-link-rfc2396E" href="mailto:sasa.friedrich@bitlab.si"><sasa.friedrich@bitlab.si></a> wrote: Hello! Acording to <a class="moz-txt-link-freetext" href="http://www.ovirt.org/Node_Glusterfs_Support">http://www.ovirt.org/Node_Glusterfs_Support</a> glusterfs on ovirt node should be supported. But I have some difficulties to implement it. I installed ovirt (nested kvm - home testing) following "Up and Running with oVirt 3.3) using Fedora19 Install went well. Everything is working fine. Now I created two hosts (nested kvm - ovirt node fc19 - just for testing) and added them in oVirt. Super fine - working! Now I'd like to use this hosts as glustefs nodes too. Acording to google (I'm googling for two days now) I'ts possible, but I can not find any usable how-to 1. I removed these two hosts from default data center 2. I created new data center (type: GlusterFS) 3. I created new cluster (Enable Gluster Service checked) 4. I added host 5. Now I get error message in events: "Could not find gluster uuid of server host1 on Cluster Cluster1." If I ssh to my host (fc19 node) glusterd.service is not running. If I try to run it It returns error here is the log: [2013-10-24 09:52:25.969899] I [glusterfsd.c:1910:main] 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.4.0 (/usr/sbin/glusterd -p /run/glusterd.pid) [2013-10-24 09:52:25.974480] I [glusterd.c:962:init] 0-management: Using /var/lib/glusterd as working directory [2013-10-24 09:52:25.977648] I [socket.c:3480:socket_init] 0-socket.management: SSL support is NOT enabled [2013-10-24 09:52:25.977694] I [socket.c:3495:socket_init] 0-socket.management: using system polling thread [2013-10-24 09:52:25.978611] W [rdma.c:4197:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device) [2013-10-24 09:52:25.978651] E [rdma.c:4485:init] 0-rdma.management: Failed to initialize IB Device [2013-10-24 09:52:25.978667] E [rpc-transport.c:320:rpc_transport_load] 0-rpc-transport: 'rdma' initialization failed [2013-10-24 09:52:25.978747] W [rpcsvc.c:1387:rpcsvc_transport_create] 0-rpc-service: cannot create listener, initing the transport failed [2013-10-24 09:52:25.979890] I [glusterd.c:354:glusterd_check_gsync_present] 0-glusterd: geo-replication module not installed in the system [2013-10-24 09:52:25.980000] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980026] E [glusterd-store.c:1277:glusterd_retrieve_op_version] 0-: Unable to get store handle! [2013-10-24 09:52:25.980048] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980060] E [glusterd-store.c:1378:glusterd_retrieve_uuid] 0-: Unable to get store handle! [2013-10-24 09:52:25.980074] I [glusterd-store.c:1348:glusterd_restore_op_version] 0-management: Detected new install. Setting op-version to maximum : 2 [2013-10-24 09:52:25.980309] E [store.c:360:gf_store_handle_new] 0-: Failed to open file: /var/lib/glusterd/options, error: Read-only file system Acording to log /var/lib/glusterd/glusterd.info is missing and can not be created because fs is mounted "ro". Now I'm stuck! What am I missing? tnx for help! </pre> </blockquote> <br> </body> </html> --------------020705030200020402030002--
Am Donnerstag, den 24.10.2013, 15:12 +0200 schrieb Saša Friedrich:
Progress report:
I remounted fs on oVirt nodes rw, started glusterd with no errors. Then I activated hosts in oVirt Engine. Also no errors! Yei!
Yey! :) Yes, mount -oremount,rw make's the FS temporarily writeable. But you will have issues as soon as you reboot. We'll need to investigate which paths need to be persisted (so the data written to them survives a reboot) and which only need to be write-able e.g. for temporary data. Would you mind opening a bug for this? Greetings fabian
Then I created volume (replication), added two bricks (oVirt nodes), and started volume. Seems fine. I checkd on node1:
# gluster volume info
Volume Name: data_vol Type: Replicate Volume ID: a1cdc762-2198-47e2-9b4a-58fd0571b269 Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: 192.168.254.124:/data/gluster Brick2: 192.168.254.141:/data/gluster Options Reconfigured: storage.owner-gid: 36 storage.owner-uid: 36 auth.allow: * user.cifs: on nfs.disable: off
WORKING!
BUT... Now i can not create storage domain. When I hit OK button on "New storage domain dialog", process is running very long. Eventually this process stops and returns " Error while executing action Add Storage Connection: Network error during communication with the Host".
I'm stuck again :-( in need for HELP!
Could you please provide the logfiles mentioned here: http://www.ovirt.org/Node_Troubleshooting#Log_Files Greetings fabian
tnx
Dne 24. 10. 2013 13:02, piše Mike Burns:
Adding to node-devel list and users list.
-- Mike
Apologies for top posting and typos. This was sent from a mobile device.
Saša Friedrich <sasa.friedrich@bitlab.si> wrote:
Hello!
Acording to http://www.ovirt.org/Node_Glusterfs_Support glusterfs on ovirt node should be supported. But I have some difficulties to implement it.
I installed ovirt (nested kvm - home testing) following "Up and Running with oVirt 3.3) using Fedora19 Install went well. Everything is working fine.
Now I created two hosts (nested kvm - ovirt node fc19 - just for testing) and added them in oVirt. Super fine - working!
Now I'd like to use this hosts as glustefs nodes too. Acording to google (I'm googling for two days now) I'ts possible, but I can not find any usable how-to
1. I removed these two hosts from default data center 2. I created new data center (type: GlusterFS) 3. I created new cluster (Enable Gluster Service checked) 4. I added host 5. Now I get error message in events: "Could not find gluster uuid of server host1 on Cluster Cluster1."
If I ssh to my host (fc19 node) glusterd.service is not running. If I try to run it It returns error
here is the log: [2013-10-24 09:52:25.969899] I [glusterfsd.c:1910:main] 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.4.0 (/usr/sbin/glusterd -p /run/glusterd.pid) [2013-10-24 09:52:25.974480] I [glusterd.c:962:init] 0-management: Using /var/lib/glusterd as working directory [2013-10-24 09:52:25.977648] I [socket.c:3480:socket_init] 0-socket.management: SSL support is NOT enabled [2013-10-24 09:52:25.977694] I [socket.c:3495:socket_init] 0-socket.management: using system polling thread [2013-10-24 09:52:25.978611] W [rdma.c:4197:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device) [2013-10-24 09:52:25.978651] E [rdma.c:4485:init] 0-rdma.management: Failed to initialize IB Device [2013-10-24 09:52:25.978667] E [rpc-transport.c:320:rpc_transport_load] 0-rpc-transport: 'rdma' initialization failed [2013-10-24 09:52:25.978747] W [rpcsvc.c:1387:rpcsvc_transport_create] 0-rpc-service: cannot create listener, initing the transport failed [2013-10-24 09:52:25.979890] I [glusterd.c:354:glusterd_check_gsync_present] 0-glusterd: geo-replication module not installed in the system [2013-10-24 09:52:25.980000] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980026] E [glusterd-store.c:1277:glusterd_retrieve_op_version] 0-: Unable to get store handle! [2013-10-24 09:52:25.980048] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980060] E [glusterd-store.c:1378:glusterd_retrieve_uuid] 0-: Unable to get store handle! [2013-10-24 09:52:25.980074] I [glusterd-store.c:1348:glusterd_restore_op_version] 0-management: Detected new install. Setting op-version to maximum : 2 [2013-10-24 09:52:25.980309] E [store.c:360:gf_store_handle_new] 0-: Failed to open file: /var/lib/glusterd/options, error: Read-only file system
Acording to log /var/lib/glusterd/glusterd.info is missing and can not be created because fs is mounted "ro".
Now I'm stuck! What am I missing?
tnx for help!
_______________________________________________ node-devel mailing list node-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/node-devel
I reinstalled node and remounter / rw then I checked fs before activating host (in oVirt Engine) and after (which files have been changed)... The "ro" problem seems to be in /var/lib/glusterd/. Is there any way I can change node so this directory would be mounted rw? And to persist this setting after reboot. tnx Dne 24. 10. 2013 15:28, piše Fabian Deutsch:
Am Donnerstag, den 24.10.2013, 15:12 +0200 schrieb Saša Friedrich:
Progress report:
I remounted fs on oVirt nodes rw, started glusterd with no errors. Then I activated hosts in oVirt Engine. Also no errors! Yei! Yey! :) Yes, mount -oremount,rw make's the FS temporarily writeable. But you will have issues as soon as you reboot. We'll need to investigate which paths need to be persisted (so the data written to them survives a reboot) and which only need to be write-able e.g. for temporary data.
Would you mind opening a bug for this?
Greetings fabian
Then I created volume (replication), added two bricks (oVirt nodes), and started volume. Seems fine. I checkd on node1:
# gluster volume info
Volume Name: data_vol Type: Replicate Volume ID: a1cdc762-2198-47e2-9b4a-58fd0571b269 Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: 192.168.254.124:/data/gluster Brick2: 192.168.254.141:/data/gluster Options Reconfigured: storage.owner-gid: 36 storage.owner-uid: 36 auth.allow: * user.cifs: on nfs.disable: off
WORKING!
BUT... Now i can not create storage domain. When I hit OK button on "New storage domain dialog", process is running very long. Eventually this process stops and returns " Error while executing action Add Storage Connection: Network error during communication with the Host".
I'm stuck again :-( in need for HELP! Could you please provide the logfiles mentioned here: http://www.ovirt.org/Node_Troubleshooting#Log_Files
Greetings fabian
tnx
Dne 24. 10. 2013 13:02, piše Mike Burns:
Adding to node-devel list and users list.
-- Mike
Apologies for top posting and typos. This was sent from a mobile device.
Saša Friedrich <sasa.friedrich@bitlab.si> wrote:
Hello!
Acording to http://www.ovirt.org/Node_Glusterfs_Support glusterfs on ovirt node should be supported. But I have some difficulties to implement it.
I installed ovirt (nested kvm - home testing) following "Up and Running with oVirt 3.3) using Fedora19 Install went well. Everything is working fine.
Now I created two hosts (nested kvm - ovirt node fc19 - just for testing) and added them in oVirt. Super fine - working!
Now I'd like to use this hosts as glustefs nodes too. Acording to google (I'm googling for two days now) I'ts possible, but I can not find any usable how-to
1. I removed these two hosts from default data center 2. I created new data center (type: GlusterFS) 3. I created new cluster (Enable Gluster Service checked) 4. I added host 5. Now I get error message in events: "Could not find gluster uuid of server host1 on Cluster Cluster1."
If I ssh to my host (fc19 node) glusterd.service is not running. If I try to run it It returns error
here is the log: [2013-10-24 09:52:25.969899] I [glusterfsd.c:1910:main] 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.4.0 (/usr/sbin/glusterd -p /run/glusterd.pid) [2013-10-24 09:52:25.974480] I [glusterd.c:962:init] 0-management: Using /var/lib/glusterd as working directory [2013-10-24 09:52:25.977648] I [socket.c:3480:socket_init] 0-socket.management: SSL support is NOT enabled [2013-10-24 09:52:25.977694] I [socket.c:3495:socket_init] 0-socket.management: using system polling thread [2013-10-24 09:52:25.978611] W [rdma.c:4197:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device) [2013-10-24 09:52:25.978651] E [rdma.c:4485:init] 0-rdma.management: Failed to initialize IB Device [2013-10-24 09:52:25.978667] E [rpc-transport.c:320:rpc_transport_load] 0-rpc-transport: 'rdma' initialization failed [2013-10-24 09:52:25.978747] W [rpcsvc.c:1387:rpcsvc_transport_create] 0-rpc-service: cannot create listener, initing the transport failed [2013-10-24 09:52:25.979890] I [glusterd.c:354:glusterd_check_gsync_present] 0-glusterd: geo-replication module not installed in the system [2013-10-24 09:52:25.980000] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980026] E [glusterd-store.c:1277:glusterd_retrieve_op_version] 0-: Unable to get store handle! [2013-10-24 09:52:25.980048] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980060] E [glusterd-store.c:1378:glusterd_retrieve_uuid] 0-: Unable to get store handle! [2013-10-24 09:52:25.980074] I [glusterd-store.c:1348:glusterd_restore_op_version] 0-management: Detected new install. Setting op-version to maximum : 2 [2013-10-24 09:52:25.980309] E [store.c:360:gf_store_handle_new] 0-: Failed to open file: /var/lib/glusterd/options, error: Read-only file system
Acording to log /var/lib/glusterd/glusterd.info is missing and can not be created because fs is mounted "ro".
Now I'm stuck! What am I missing?
tnx for help!
node-devel mailing list node-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/node-devel
Am Donnerstag, den 24.10.2013, 19:59 +0200 schrieb Saša Friedrich:
I reinstalled node and remounter / rw then I checked fs before activating host (in oVirt Engine) and after (which files have been changed)... The "ro" problem seems to be in /var/lib/glusterd/. Is there any way I can change node so this directory would be mounted rw? And to persist this setting after reboot.
Hey, do you know if the data in /var/lib/glusterd needs to survive reboots? If not, then this patch http://gerrit.ovirt.org/20540 will probably fix the problem. The patch just adds that path to /etc/rwtab.d/ovirt - this will tell the read-only root to make that path writable at boot. Due to the nature of Node you will need to build your own image or wait until the patch lands in an image. Editing the rwtab file by hand at runtime won't have an effect. Greetings fabian
tnx
Dne 24. 10. 2013 15:28, piše Fabian Deutsch:
Am Donnerstag, den 24.10.2013, 15:12 +0200 schrieb Saša Friedrich:
Progress report:
I remounted fs on oVirt nodes rw, started glusterd with no errors. Then I activated hosts in oVirt Engine. Also no errors! Yei! Yey! :) Yes, mount -oremount,rw make's the FS temporarily writeable. But you will have issues as soon as you reboot. We'll need to investigate which paths need to be persisted (so the data written to them survives a reboot) and which only need to be write-able e.g. for temporary data.
Would you mind opening a bug for this?
Greetings fabian
Then I created volume (replication), added two bricks (oVirt nodes), and started volume. Seems fine. I checkd on node1:
# gluster volume info
Volume Name: data_vol Type: Replicate Volume ID: a1cdc762-2198-47e2-9b4a-58fd0571b269 Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: 192.168.254.124:/data/gluster Brick2: 192.168.254.141:/data/gluster Options Reconfigured: storage.owner-gid: 36 storage.owner-uid: 36 auth.allow: * user.cifs: on nfs.disable: off
WORKING!
BUT... Now i can not create storage domain. When I hit OK button on "New storage domain dialog", process is running very long. Eventually this process stops and returns " Error while executing action Add Storage Connection: Network error during communication with the Host".
I'm stuck again :-( in need for HELP! Could you please provide the logfiles mentioned here: http://www.ovirt.org/Node_Troubleshooting#Log_Files
Greetings fabian
tnx
Dne 24. 10. 2013 13:02, piše Mike Burns:
Adding to node-devel list and users list.
-- Mike
Apologies for top posting and typos. This was sent from a mobile device.
Saša Friedrich <sasa.friedrich@bitlab.si> wrote:
Hello!
Acording to http://www.ovirt.org/Node_Glusterfs_Support glusterfs on ovirt node should be supported. But I have some difficulties to implement it.
I installed ovirt (nested kvm - home testing) following "Up and Running with oVirt 3.3) using Fedora19 Install went well. Everything is working fine.
Now I created two hosts (nested kvm - ovirt node fc19 - just for testing) and added them in oVirt. Super fine - working!
Now I'd like to use this hosts as glustefs nodes too. Acording to google (I'm googling for two days now) I'ts possible, but I can not find any usable how-to
1. I removed these two hosts from default data center 2. I created new data center (type: GlusterFS) 3. I created new cluster (Enable Gluster Service checked) 4. I added host 5. Now I get error message in events: "Could not find gluster uuid of server host1 on Cluster Cluster1."
If I ssh to my host (fc19 node) glusterd.service is not running. If I try to run it It returns error
here is the log: [2013-10-24 09:52:25.969899] I [glusterfsd.c:1910:main] 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.4.0 (/usr/sbin/glusterd -p /run/glusterd.pid) [2013-10-24 09:52:25.974480] I [glusterd.c:962:init] 0-management: Using /var/lib/glusterd as working directory [2013-10-24 09:52:25.977648] I [socket.c:3480:socket_init] 0-socket.management: SSL support is NOT enabled [2013-10-24 09:52:25.977694] I [socket.c:3495:socket_init] 0-socket.management: using system polling thread [2013-10-24 09:52:25.978611] W [rdma.c:4197:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device) [2013-10-24 09:52:25.978651] E [rdma.c:4485:init] 0-rdma.management: Failed to initialize IB Device [2013-10-24 09:52:25.978667] E [rpc-transport.c:320:rpc_transport_load] 0-rpc-transport: 'rdma' initialization failed [2013-10-24 09:52:25.978747] W [rpcsvc.c:1387:rpcsvc_transport_create] 0-rpc-service: cannot create listener, initing the transport failed [2013-10-24 09:52:25.979890] I [glusterd.c:354:glusterd_check_gsync_present] 0-glusterd: geo-replication module not installed in the system [2013-10-24 09:52:25.980000] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980026] E [glusterd-store.c:1277:glusterd_retrieve_op_version] 0-: Unable to get store handle! [2013-10-24 09:52:25.980048] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980060] E [glusterd-store.c:1378:glusterd_retrieve_uuid] 0-: Unable to get store handle! [2013-10-24 09:52:25.980074] I [glusterd-store.c:1348:glusterd_restore_op_version] 0-management: Detected new install. Setting op-version to maximum : 2 [2013-10-24 09:52:25.980309] E [store.c:360:gf_store_handle_new] 0-: Failed to open file: /var/lib/glusterd/options, error: Read-only file system
Acording to log /var/lib/glusterd/glusterd.info is missing and can not be created because fs is mounted "ro".
Now I'm stuck! What am I missing?
tnx for help!
node-devel mailing list node-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/node-devel
Thanks, I'll try that (and report). And I think data in that path don't need to be persistant, because when I reboot node, and make whole fs rw again, host gets attached to oVirt with no errors. One more thing. Messages log file keep getting me errors (every 2 sec): Oct 25 08:32:50 localhost python[462]: service-status: ServiceNotExistError: Tried all alternatives but failed: Oct 25 08:32:50 localhost python[462]: ServiceNotExistError: gluster-swift-object is not a SysV service Oct 25 08:32:50 localhost python[462]: ServiceNotExistError: gluster-swift-object is not native systemctl service . . . . . Oct 25 08:33:18 localhost python[462]: service-is-managed: ServiceNotExistError: Tried all alternatives but failed: Oct 25 08:33:18 localhost python[462]: ServiceNotExistError: smb is not native systemctl service Oct 25 08:33:18 localhost python[462]: ServiceNotExistError: samba is not native systemctl service Oct 25 08:33:18 localhost python[462]: ServiceNotExistError: smb is not a SysV service Oct 25 08:33:18 localhost python[462]: ServiceNotExistError: samba is not a SysV service So I somehow lost hope for node and tried makeing host from fc19 (minimal installation). Installed, attached host in oVirt engine, but... Errors are the same! Any clue? tnx Dne 25. 10. 2013 08:27, piše Fabian Deutsch:
Am Donnerstag, den 24.10.2013, 19:59 +0200 schrieb Saša Friedrich:
I reinstalled node and remounter / rw then I checked fs before activating host (in oVirt Engine) and after (which files have been changed)... The "ro" problem seems to be in /var/lib/glusterd/. Is there any way I can change node so this directory would be mounted rw? And to persist this setting after reboot. Hey,
do you know if the data in /var/lib/glusterd needs to survive reboots? If not, then this patch http://gerrit.ovirt.org/20540 will probably fix the problem. The patch just adds that path to /etc/rwtab.d/ovirt - this will tell the read-only root to make that path writable at boot. Due to the nature of Node you will need to build your own image or wait until the patch lands in an image. Editing the rwtab file by hand at runtime won't have an effect.
Greetings fabian
tnx
Dne 24. 10. 2013 15:28, piše Fabian Deutsch:
Am Donnerstag, den 24.10.2013, 15:12 +0200 schrieb Saša Friedrich:
Progress report:
I remounted fs on oVirt nodes rw, started glusterd with no errors. Then I activated hosts in oVirt Engine. Also no errors! Yei! Yey! :) Yes, mount -oremount,rw make's the FS temporarily writeable. But you will have issues as soon as you reboot. We'll need to investigate which paths need to be persisted (so the data written to them survives a reboot) and which only need to be write-able e.g. for temporary data.
Would you mind opening a bug for this?
Greetings fabian
Then I created volume (replication), added two bricks (oVirt nodes), and started volume. Seems fine. I checkd on node1:
# gluster volume info
Volume Name: data_vol Type: Replicate Volume ID: a1cdc762-2198-47e2-9b4a-58fd0571b269 Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: 192.168.254.124:/data/gluster Brick2: 192.168.254.141:/data/gluster Options Reconfigured: storage.owner-gid: 36 storage.owner-uid: 36 auth.allow: * user.cifs: on nfs.disable: off
WORKING!
BUT... Now i can not create storage domain. When I hit OK button on "New storage domain dialog", process is running very long. Eventually this process stops and returns " Error while executing action Add Storage Connection: Network error during communication with the Host".
I'm stuck again :-( in need for HELP! Could you please provide the logfiles mentioned here: http://www.ovirt.org/Node_Troubleshooting#Log_Files
Greetings fabian
tnx
Dne 24. 10. 2013 13:02, piše Mike Burns:
Adding to node-devel list and users list.
-- Mike
Apologies for top posting and typos. This was sent from a mobile device.
Saša Friedrich <sasa.friedrich@bitlab.si> wrote:
Hello!
Acording to http://www.ovirt.org/Node_Glusterfs_Support glusterfs on ovirt node should be supported. But I have some difficulties to implement it.
I installed ovirt (nested kvm - home testing) following "Up and Running with oVirt 3.3) using Fedora19 Install went well. Everything is working fine.
Now I created two hosts (nested kvm - ovirt node fc19 - just for testing) and added them in oVirt. Super fine - working!
Now I'd like to use this hosts as glustefs nodes too. Acording to google (I'm googling for two days now) I'ts possible, but I can not find any usable how-to
1. I removed these two hosts from default data center 2. I created new data center (type: GlusterFS) 3. I created new cluster (Enable Gluster Service checked) 4. I added host 5. Now I get error message in events: "Could not find gluster uuid of server host1 on Cluster Cluster1."
If I ssh to my host (fc19 node) glusterd.service is not running. If I try to run it It returns error
here is the log: [2013-10-24 09:52:25.969899] I [glusterfsd.c:1910:main] 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.4.0 (/usr/sbin/glusterd -p /run/glusterd.pid) [2013-10-24 09:52:25.974480] I [glusterd.c:962:init] 0-management: Using /var/lib/glusterd as working directory [2013-10-24 09:52:25.977648] I [socket.c:3480:socket_init] 0-socket.management: SSL support is NOT enabled [2013-10-24 09:52:25.977694] I [socket.c:3495:socket_init] 0-socket.management: using system polling thread [2013-10-24 09:52:25.978611] W [rdma.c:4197:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device) [2013-10-24 09:52:25.978651] E [rdma.c:4485:init] 0-rdma.management: Failed to initialize IB Device [2013-10-24 09:52:25.978667] E [rpc-transport.c:320:rpc_transport_load] 0-rpc-transport: 'rdma' initialization failed [2013-10-24 09:52:25.978747] W [rpcsvc.c:1387:rpcsvc_transport_create] 0-rpc-service: cannot create listener, initing the transport failed [2013-10-24 09:52:25.979890] I [glusterd.c:354:glusterd_check_gsync_present] 0-glusterd: geo-replication module not installed in the system [2013-10-24 09:52:25.980000] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980026] E [glusterd-store.c:1277:glusterd_retrieve_op_version] 0-: Unable to get store handle! [2013-10-24 09:52:25.980048] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980060] E [glusterd-store.c:1378:glusterd_retrieve_uuid] 0-: Unable to get store handle! [2013-10-24 09:52:25.980074] I [glusterd-store.c:1348:glusterd_restore_op_version] 0-management: Detected new install. Setting op-version to maximum : 2 [2013-10-24 09:52:25.980309] E [store.c:360:gf_store_handle_new] 0-: Failed to open file: /var/lib/glusterd/options, error: Read-only file system
Acording to log /var/lib/glusterd/glusterd.info is missing and can not be created because fs is mounted "ro".
Now I'm stuck! What am I missing?
tnx for help!
node-devel mailing list node-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/node-devel
On 10/25/2013 02:27 AM, Fabian Deutsch wrote:
Am Donnerstag, den 24.10.2013, 19:59 +0200 schrieb Saša Friedrich:
I reinstalled node and remounter / rw then I checked fs before activating host (in oVirt Engine) and after (which files have been changed)... The "ro" problem seems to be in /var/lib/glusterd/. Is there any way I can change node so this directory would be mounted rw? And to persist this setting after reboot.
Hey,
do you know if the data in /var/lib/glusterd needs to survive reboots? If not, then this patch http://gerrit.ovirt.org/20540 will probably fix
I'll ack this once you fix the typo in the summary (s/bar/var/) Mike
the problem. The patch just adds that path to /etc/rwtab.d/ovirt - this will tell the read-only root to make that path writable at boot. Due to the nature of Node you will need to build your own image or wait until the patch lands in an image. Editing the rwtab file by hand at runtime won't have an effect.
Greetings fabian
tnx
Dne 24. 10. 2013 15:28, piše Fabian Deutsch:
Am Donnerstag, den 24.10.2013, 15:12 +0200 schrieb Saša Friedrich:
Progress report:
I remounted fs on oVirt nodes rw, started glusterd with no errors. Then I activated hosts in oVirt Engine. Also no errors! Yei! Yey! :) Yes, mount -oremount,rw make's the FS temporarily writeable. But you will have issues as soon as you reboot. We'll need to investigate which paths need to be persisted (so the data written to them survives a reboot) and which only need to be write-able e.g. for temporary data.
Would you mind opening a bug for this?
Greetings fabian
Then I created volume (replication), added two bricks (oVirt nodes), and started volume. Seems fine. I checkd on node1:
# gluster volume info
Volume Name: data_vol Type: Replicate Volume ID: a1cdc762-2198-47e2-9b4a-58fd0571b269 Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: 192.168.254.124:/data/gluster Brick2: 192.168.254.141:/data/gluster Options Reconfigured: storage.owner-gid: 36 storage.owner-uid: 36 auth.allow: * user.cifs: on nfs.disable: off
WORKING!
BUT... Now i can not create storage domain. When I hit OK button on "New storage domain dialog", process is running very long. Eventually this process stops and returns " Error while executing action Add Storage Connection: Network error during communication with the Host".
I'm stuck again :-( in need for HELP! Could you please provide the logfiles mentioned here: http://www.ovirt.org/Node_Troubleshooting#Log_Files
Greetings fabian
tnx
Dne 24. 10. 2013 13:02, piše Mike Burns:
Adding to node-devel list and users list.
-- Mike
Apologies for top posting and typos. This was sent from a mobile device.
Saša Friedrich <sasa.friedrich@bitlab.si> wrote:
Hello!
Acording to http://www.ovirt.org/Node_Glusterfs_Support glusterfs on ovirt node should be supported. But I have some difficulties to implement it.
I installed ovirt (nested kvm - home testing) following "Up and Running with oVirt 3.3) using Fedora19 Install went well. Everything is working fine.
Now I created two hosts (nested kvm - ovirt node fc19 - just for testing) and added them in oVirt. Super fine - working!
Now I'd like to use this hosts as glustefs nodes too. Acording to google (I'm googling for two days now) I'ts possible, but I can not find any usable how-to
1. I removed these two hosts from default data center 2. I created new data center (type: GlusterFS) 3. I created new cluster (Enable Gluster Service checked) 4. I added host 5. Now I get error message in events: "Could not find gluster uuid of server host1 on Cluster Cluster1."
If I ssh to my host (fc19 node) glusterd.service is not running. If I try to run it It returns error
here is the log: [2013-10-24 09:52:25.969899] I [glusterfsd.c:1910:main] 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.4.0 (/usr/sbin/glusterd -p /run/glusterd.pid) [2013-10-24 09:52:25.974480] I [glusterd.c:962:init] 0-management: Using /var/lib/glusterd as working directory [2013-10-24 09:52:25.977648] I [socket.c:3480:socket_init] 0-socket.management: SSL support is NOT enabled [2013-10-24 09:52:25.977694] I [socket.c:3495:socket_init] 0-socket.management: using system polling thread [2013-10-24 09:52:25.978611] W [rdma.c:4197:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device) [2013-10-24 09:52:25.978651] E [rdma.c:4485:init] 0-rdma.management: Failed to initialize IB Device [2013-10-24 09:52:25.978667] E [rpc-transport.c:320:rpc_transport_load] 0-rpc-transport: 'rdma' initialization failed [2013-10-24 09:52:25.978747] W [rpcsvc.c:1387:rpcsvc_transport_create] 0-rpc-service: cannot create listener, initing the transport failed [2013-10-24 09:52:25.979890] I [glusterd.c:354:glusterd_check_gsync_present] 0-glusterd: geo-replication module not installed in the system [2013-10-24 09:52:25.980000] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980026] E [glusterd-store.c:1277:glusterd_retrieve_op_version] 0-: Unable to get store handle! [2013-10-24 09:52:25.980048] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980060] E [glusterd-store.c:1378:glusterd_retrieve_uuid] 0-: Unable to get store handle! [2013-10-24 09:52:25.980074] I [glusterd-store.c:1348:glusterd_restore_op_version] 0-management: Detected new install. Setting op-version to maximum : 2 [2013-10-24 09:52:25.980309] E [store.c:360:gf_store_handle_new] 0-: Failed to open file: /var/lib/glusterd/options, error: Read-only file system
Acording to log /var/lib/glusterd/glusterd.info is missing and can not be created because fs is mounted "ro".
Now I'm stuck! What am I missing?
tnx for help!
node-devel mailing list node-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/node-devel
_______________________________________________ node-devel mailing list node-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/node-devel
On 10/25/2013 11:57 AM, Fabian Deutsch wrote:
Am Donnerstag, den 24.10.2013, 19:59 +0200 schrieb Saša Friedrich:
I reinstalled node and remounter / rw then I checked fs before activating host (in oVirt Engine) and after (which files have been changed)... The "ro" problem seems to be in /var/lib/glusterd/. Is there any way I can change node so this directory would be mounted rw? And to persist this setting after reboot.
Hey,
do you know if the data in /var/lib/glusterd needs to survive reboots?
/var/lib/glusterd does need to survive reboots. -Vijay
Am Samstag, den 26.10.2013, 21:46 +0530 schrieb Vijay Bellur:
On 10/25/2013 11:57 AM, Fabian Deutsch wrote:
Am Donnerstag, den 24.10.2013, 19:59 +0200 schrieb Saša Friedrich:
I reinstalled node and remounter / rw then I checked fs before activating host (in oVirt Engine) and after (which files have been changed)... The "ro" problem seems to be in /var/lib/glusterd/. Is there any way I can change node so this directory would be mounted rw? And to persist this setting after reboot.
Hey,
do you know if the data in /var/lib/glusterd needs to survive reboots?
/var/lib/glusterd does need to survive reboots.
Thanks for this info! Then we'll probably need another patch to make this happen. Greetings fabian
Am Donnerstag, den 24.10.2013, 07:02 -0400 schrieb Mike Burns:
Adding to node-devel list and users list.
-- Mike
Apologies for top posting and typos. This was sent from a mobile device.
Saša Friedrich <sasa.friedrich@bitlab.si> wrote:
Hello!
Acording to http://www.ovirt.org/Node_Glusterfs_Support glusterfs on ovirt node should be supported. But I have some difficulties to implement it.
I installed ovirt (nested kvm - home testing) following "Up and Running with oVirt 3.3) using Fedora19 Install went well. Everything is working fine.
Now I created two hosts (nested kvm - ovirt node fc19 - just for testing) and added them in oVirt. Super fine - working!
Now I'd like to use this hosts as glustefs nodes too. Acording to google (I'm googling for two days now) I'ts possible, but I can not find any usable how-to
1. I removed these two hosts from default data center 2. I created new data center (type: GlusterFS) 3. I created new cluster (Enable Gluster Service checked) 4. I added host 5. Now I get error message in events: "Could not find gluster uuid of server host1 on Cluster Cluster1."
If I ssh to my host (fc19 node) glusterd.service is not running. If I try to run it It returns error
here is the log: [2013-10-24 09:52:25.969899] I [glusterfsd.c:1910:main] 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.4.0 (/usr/sbin/glusterd -p /run/glusterd.pid) [2013-10-24 09:52:25.974480] I [glusterd.c:962:init] 0-management: Using /var/lib/glusterd as working directory [2013-10-24 09:52:25.977648] I [socket.c:3480:socket_init] 0-socket.management: SSL support is NOT enabled [2013-10-24 09:52:25.977694] I [socket.c:3495:socket_init] 0-socket.management: using system polling thread [2013-10-24 09:52:25.978611] W [rdma.c:4197:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device) [2013-10-24 09:52:25.978651] E [rdma.c:4485:init] 0-rdma.management: Failed to initialize IB Device [2013-10-24 09:52:25.978667] E [rpc-transport.c:320:rpc_transport_load] 0-rpc-transport: 'rdma' initialization failed [2013-10-24 09:52:25.978747] W [rpcsvc.c:1387:rpcsvc_transport_create] 0-rpc-service: cannot create listener, initing the transport failed [2013-10-24 09:52:25.979890] I [glusterd.c:354:glusterd_check_gsync_present] 0-glusterd: geo-replication module not installed in the system [2013-10-24 09:52:25.980000] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980026] E [glusterd-store.c:1277:glusterd_retrieve_op_version] 0-: Unable to get store handle! [2013-10-24 09:52:25.980048] E [store.c:394:gf_store_handle_retrieve] 0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info, error: No such file or directory [2013-10-24 09:52:25.980060] E [glusterd-store.c:1378:glusterd_retrieve_uuid] 0-: Unable to get store handle! [2013-10-24 09:52:25.980074] I [glusterd-store.c:1348:glusterd_restore_op_version] 0-management: Detected new install. Setting op-version to maximum : 2 [2013-10-24 09:52:25.980309] E [store.c:360:gf_store_handle_new] 0-: Failed to open file: /var/lib/glusterd/options, error: Read-only file system
Hey Sasa, that looks like we are missing a couple of paths which need either be write-able or even further more persisted. Greetings fabian
Acording to log /var/lib/glusterd/glusterd.info is missing and can not be created because fs is mounted "ro".
Now I'm stuck! What am I missing?
tnx for help! _______________________________________________ node-devel mailing list node-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/node-devel
participants (4)
-
Fabian Deutsch -
Mike Burns -
Saša Friedrich -
Vijay Bellur