Hey Alex, I used to have a similar problem a while back on an NFS data domain. Any time I did a large file operation (create template, export vm, import vm), I got that message, and had to wait until the SPM was re-assigned. I replaced my raid controller card, and the problem went away. I was able to isolate the problem by creating a new data domain using an external USB hard drive, and showing that it no longer happened on the new domain. Might be unrelated, but also might be something worth checking out to see if you can rule out your storage as the cause of the problem. Good luck! Tim Hildred, RHCE Content Author II - Engineering Content Services, Red Hat, Inc. Brisbane, Australia Email: thildred@redhat.com Internal: 8588287 Mobile: +61 4 666 25242 IRC: thildred ----- Original Message -----

From: "Alex Leonhardt" <alex.tuxx@gmail.com> To: "oVirt Mailing List" <users@ovirt.org> Sent: Tuesday, January 29, 2013 2:55:17 AM Subject: [Users] Data Center is being initialized, please wait for initialization to complete

Hi,

Occasionally, mainly after doing larger disk operations, I see this :

Data Center is being initialized, please wait for initialization to complete

and then the SPM host changes ...

I didnt see any particular load on that server at the time it happened - I simply told it to delete some VMs from a export domain.

Any clues ?

Alex

--

| RHCE | Senior Systems Engineer | www.vcore.co | | www.vsearchcloud.com |

_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users